AC to DC Power Supplies

AC-DC LED Driver Power Supplies offer 0-10 V dimming control.
AC to DC Power Supplies

AC-DC LED Driver Power Supplies offer 0-10 V dimming control.

Featuring 3.35 x 2.13 x 1.28 in. form factor, 16.8 W Series LD015D is fully potted and suitable for dry and damp locations. Units offer input voltage of 110 or 230 Vac, DC output from 8-48 Vdc, and wide selection of pre-adjusted constant current outputs. Operating from -20 to +60°C, RoHS-compliant power supplies are phase dimmable, compatible with standard triac and electronic low voltage...

Read More »
AC-DC Power Supply delivers 6 W.
AC to DC Power Supplies

AC-DC Power Supply delivers 6 W.

Suited for consumer, industrial, and ITE applications, Model VOF-6 provides continuous output power, universal input of 85-264 Vdc, and output voltages of 3.3, 5, 12, 15, and 24 Vdc. Unit includes protections for both over voltage and over current conditions. Measuring 2.2 x 1.4 x 0.65 in., open frame power supply offers leakage currents below 0.3 mA.

Read More »
AC/DC Switching Power Supply delivers 15 W output power.
AC to DC Power Supplies

AC/DC Switching Power Supply delivers 15 W output power.

Suited for ruggedized backplane applications, chassis-mountable PC15 Series comes encapsulated with thermally conductive potting compound in plastic resin and fiberglass case that meets UL94V-0. UL-approved and RoHS-compliant series, operating from 85-265 Vac at 47-440 Hz, includes single-output models available with outputs from 5-48 Vdc as well as dual- and triple-output models. Protective...

Read More »
Open-Frame, 150 W AC-DC Power Supply measures 2 x 4 x 1.26 in.
AC to DC Power Supplies

Open-Frame, 150 W AC-DC Power Supply measures 2 x 4 x 1.26 in.

Model ECP150, featuring power density of 14.88 W/cu in., complies with UL/EN/IEC60950-1 and UL/EN/IEC60601-1 safety standards for medical and IT equipment. It has no load input power of less than 0.5 W and typical efficiency of 91%, while operating from universal input of 90-264 Vac, in temperatures from -20 to +70°C. Overvoltage, overload, and short-circuit protection are included. Five...

Read More »
Power Supplies suit hot-plug and redundant power systems.
AC to DC Power Supplies

Power Supplies suit hot-plug and redundant power systems.

Operating off universal AC input of 85-265 Vac with active PFC, 1,600 W HFE1600 Series provides regulated DC output of 12, 24, or 48 V with operating efficiencies up to 92%. Front-end power supplies, measuring 1.61 x 3.35 x 11.8 in., feature rack mounted enclosure, which enables up to 5 units to be paralleled with automatic load-sharing to provide up to 7,600 W of output power. Integral MCU...

Read More »
AC to DC Power Supplies

AC/DC Power Supplies meets multiuple energy standards.

Offering single output voltages of 12, 15, 18, and 24 Vdc, AFM series is comprised of 48 and 60 W external power supplies with respective no-load power consumption of less than 0.3 and 0.5 W. Products deliver up to 88% typ efficiency and comply with international safety approval standards for IT, commercial, and medical equipment. Multiple input cable interface options allow designers to specify...

Read More »
AC to DC Power Supplies

Welding Power Supply accommodates diverse applications.

Equipped with dual pulse function as standard, NRW-DC150 precision resistance welder is used in electronic equipment assembly and miniature component welding. Capacitor-discharge type power supply accommodates welding of difficult material combinations as well as welding between different metals. Also included, VS mode helps make power supply applicable to range of parts geometries. Welding speed...

Read More »
AC-DC Power Supplies withstand 3 kVac, input-to-output.
AC to DC Power Supplies

AC-DC Power Supplies withstand 3 kVac, input-to-output.

Featuring 86-264 Vac, 47-63 Hz input with PFC, ZWS-BAF Series includes 100 and 150 W power supplies with 2.44 x 6.1 in. or 3 x 6.3 in. footprints and 1.3-1.45 in. profile. Open-frame PCB-mount units provide single output voltages of 3.3, 5, 12, 15, 24, or 48 Vdc, all with ±10% adjustment range. Designed with convection cooling, products feature temperature range of -10 to +70°C with...

Read More »
AC to DC Power Supplies

Isolated AC/DC Converter offers slim form factor and PFC.

Supplied in thermally-adept, ruggedized package with 9.5 mm profile, PFM(TM) VI BRICK(TM) features Adaptive Cell(TM) architecture, which enables consistent efficiency over worldwide AC mains, and delivers 330 W at 48 V (SELV). Converter provides isolation, voltage transformation, and PFC regulation in single stage using soft switching technology. Modular and scalable power component functionality...

Read More »
AC to DC Power Supplies

AC/DC LED Power Supplies handle constant current to 1,000 mA.

RoHS-compliant LIS12 series includes 4 standard models with 18-36, 12-24, 9-18, and 9-12 V forward voltage ranges, respectively suited for driving 6-9, 4-6, 3-4, and 2-3 white LEDs in series where 350, 500, 700, and 1,000 mA constant current is required. Offering outputs from 8-12 W, products accept 90-264 Vac universal input that is isolated from DC output and operate with 80% efficiency....

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics