AC/DC Power Supplies have modular, configurable architecture.
With near 90% efficient design, RCB/MCB Series can be configured from main input chassis with up to 4 or 8 isolated outputs in virtually any combination of 5, 12, 24, and 48 V output modules. Custom-configured solutions come standard with universal input voltages and Active Power Factor Correction. System level integration features include current share, 5 V bias supply, remote voltage and...
Read More »
Switching Power Supply comes in 3 x 5 in. U-frame package.
Designed for high-density 1U applications, TIP400 delivers 12 Vdc @ 33 A. Solution is rated to 400 W and offers greater than 90% efficiency with forced air cooling. Features include I-²C digital interface; universal AC input with active PFC; current share with Or-ing diodes; as well as AC OK, DC OK, Remote On/Off, and Over Temperature Warning signals. RoHS 6/6-compliant and safety qualified for...
Read More »
Compact Switching Power Supplies support worldwide usage.
Measuring 1.90 x 1.31 x 0.98 in., IP66-rated BPW 4 Series provides up to 4 W output at 8, 14, and 24 Vdc as well as optional 3.3 and 5.0 Vdc output. Products handle wide load variations and accept 85-308 Vac, 50/60 Hz universal input. Along with no-load power consumption of less than 30 mW, power supplies feature constant power mode and greater than 500,000 hr MTBF. Output power does not degrade...
Read More »Medical AC/DC Power Supply deliver 60 W continuous power.
Built on PCB with open frame construction and heat sinking, Cincon CFM60M Series is capable of delivering 60 W continuous power from 4 x 2 x 1.10 in. package with 20 lfm forced air cooling. Products are designed for medical applications but not life-supporting equipment. All AC/DC switching power supply models meet UL 60601-1, IEC60601-1, and EN 60601-1 safety standard approvals as well as EMC...
Read More »
Fastener Technical Resource Guide
This fastener technical resource guide will show you how to specify nuts, points, heads, washers and more.
Read More »Rackmount Power Supply supports broad configurability.
Featuring universal 90-264 Vac input, VersaPower converts to many different standard and non-standard DC outputs. This customer-configurable 1U, 2U, and 3U rack mount power system offers user-selectable outputs with 100,000+ combinations, including 10-2,000 W per system and up to 16 output voltages; multiple output voltages are available on each system. Other features include front panel on/off...
Read More »High-Efficiency Power Supplies suit LED lighting applications.
Operating from 120-277 Vac input, 25 W-rated LDS25 series delivers up to 700 mA at 36 Vdc, incorporates active PFC, and offers conversion efficiency of 86% typ. Constant current mode operates from 36-26 V, while constant voltage mode operates with load currents from 300-700 mA or to programmed current limit level that can be set by single resistor. Output current can be user-adjusted over full...
Read More »AC/DC Power Supplies comply with medical safety standards.
Featuring 3 x 5 x 1.38 in. footprint, Series PPWAM250 accepts 90-264 Vac universal input and delivers 250 W of power with 17 cfm of forced air. Single output models have regulated voltages from 12-48 Vdc with no minimum load. Series provides efficiencies greater than 85% and leakage currents as low as 300 -µA at 264 Vac. Equipped with overvoltage and short circuit protection, power supplies are...
Read More »
DIN-Rail Mount Power Supplies have compact design.
Suited for restricted installation depths, EPSITRON-® COMPACT complies with DIN 43880 specifying equipment dimensions for distribution and meter panels. Products range from 30-100 W, provide 12 and 24 Vdc output, and operate from 85-264 Vac. Tolerant of supply network voltage fluctuations, power supplies carry Protection Class II rating and utilize Constant Current Mode for switching-in loads...
Read More »
Ultrasonic Power Supplies feature color touch panel.
MPU-controlled SmartControl series has interface with optimized navigation, command flow, and graphics that highlight multiple menus designed for fully automatic control across 40, 20, and 15 kHz welding frequencies. Generators provide 400-6,000 W for ultrasonic welding presses and actuators. All units offer Digital Time, Energy, and Height-based weld modes; automatic frequency tuning; digital...
Read More »
AC/DC Power Supply comes in PCB-mount, encapsulated case.
Suited for small- to medium-size PCB applications, PK7 Series AC/DC switching power supply provides 7 W output power and operates from 85-265 Vac at 47-440 Hz. Single-output models, available as 3.3, 5, 12, 15, and 24 Vdc, incorporate output over-voltage protection as well as short circuit protection. Encapsulated with thermally conductive potting compound in plastic resin and fiberglass case...
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
