AC Motors

AC Gearmotors are rated to 1½ hp.
AC Motors

AC Gearmotors are rated to 1½ hp.

Parallel shaft 880 series, available in 5 gear ratios from 5.8:1-42.8:1, consists of totally enclosed, fan cooled motors with preloaded, permanently lubricated, shielded bearings and dynamically balanced rotor shaft. Able to produce up to 1,060 lb-in. continuous-duty torque, products feature 2- or 3-stage integral gear cases with AGMA grade 9 hobbed gears. Operation options include single-phase...

Read More »
Motors are suited for commercial grade vacuums.
AC Motors

Motors are suited for commercial grade vacuums.

Suited for commercial grade vacuums up to 10 Torr, Nema size 11, 1.8° vacuum motors in 211 Series employ no-lube stainless steel bearings or special-lube stainless steel bearings depending on rating of vacuum environment. Series measures 1.1 in.Â-² and includes models with 1.24 in. (211-13), 1.75 in. (211-18), and 1.99 in. (211-20) lengths and respective holding torque capabilities to...

Read More »
AC Induction Motors feature enclosed, waterproof design.
AC Motors

AC Induction Motors feature enclosed, waterproof design.

Available in 8 standard frame sizes, stainless steel Series WD withstands frequent wetting or washdown. For food service and other washdown applications where motor is not normally submerged, units are supplied with cooling fans. For marine or nuclear applications where submerged motors are cooled by surrounding water, motors are oil-filled and pressure-compensated. Custom versions for use in...

Read More »
Synchronous Motors offer torque limiting operation.
AC Motors

Synchronous Motors offer torque limiting operation.

Suited for applications requiring constant closing torque, RG Series utilizes magnetic hysteresis coupling between rotor and output shaft to produce constant torque when stalled. They can accelerate mass moments of inertia asynchronously, and, once synchronous speed is reached, motors maintain constant speed. Available in size 35, 50 and 64 with operation at 50 and 60 Hz, IP 40 rated motors offer...

Read More »
Induction Motor offers variable speed from 550-4,400 rpm.
AC Motors

Induction Motor offers variable speed from 550-4,400 rpm.

AC Inverter-Duty Induction Motor operates at 230 Vac with standard 3-phase AC inverter drive. Configured in 2 or 4-pole designs, power output is rated at 1/6-½ hp and 1/10-1/3 hp with fundamental frequencies from 10-80 Hz and 20-120 Hz respectively. Shaft extension, measuring ½ in. diameter provides heavy-duty load connections. Size 39 frame motor features open-frame housing, internal fan,...

Read More »
Piezoelectric Motors are suited for vacuum environments.
AC Motors

Piezoelectric Motors are suited for vacuum environments.

Available from single-element motor that provides .45 kg of force to ark 8-element motor that provides 3.6 kg of force, HR series can drive linear and rotary stages. HR-V vacuum series is rated up to 10-7 torr, and HR-UV is rated up to 10-10 torr. Both configurations are suitable for bake out and operate without any magnetic field. This makes them suited to E-Beam writing and inspection and other...

Read More »
Vacuum Motors suit forming and casting applications.
AC Motors

Vacuum Motors suit forming and casting applications.

Commercial-grade, VC Series Motors survive pressures as low as 10-6 torr and are available as stepper, hollow-shaft, brushless servo, or rotor nut motors. They are temperature-rated at 130°C internal, and 105°C for case. Bearing lubricant vapor pressure is below 10-6 torr at 100°C. Applications include metal casting, assemblies welding, and forming operations where motion...

Read More »
AC Motors resist high heat and voltage spikes.
AC Motors

AC Motors resist high heat and voltage spikes.

Measuring 2.88 in. sq at endbell and 5.22 in. in length, Series AC65 includes Class F insulation, impregnated windings, powder-coated aluminum frame, and machined aluminum endbells. Cooling channels eliminate lint, dust, and other debris build-up in fins that can cause overheating and motor damage. Available in foot- or face-mount TEFC and TENV designs in single- and 3-phase configurations,...

Read More »
Induction Motor meets NEMA 4X enclosure specifications.
AC Motors

Induction Motor meets NEMA 4X enclosure specifications.

Induction Motor features anodized aluminum, Size 44 housing finished with 3 mil thick exterior grade paint for protection against corrosion. Flanged mount, custom shaft and tightly sealed interfaces make motor watertight. Dynamically balanced rotors with calibrated bearing pre-load provide smooth, stable operation. Configured with 2 or 4 poles, motor achieves operating speeds up to 3450 rpm. It...

Read More »
Positioning Motor offers speeds of more than 100 ips.
AC Motors

Positioning Motor offers speeds of more than 100 ips.

Positioning Motor consists of 3-phase AC motor connected to frequency drive, controlled by embedded microprocessor board with speed and position encoder, all integrated in one housing. Up to 16 pre-configured motion steps, including speed, position, and torque, can be selected via 4 binary input signals. When attached to LM 3 or LM 4 linear belt driven actuator, fast x, xy, or xyz positioning...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers