AC Motors

AC Motors

MAC Motors Now In Use World-Wide

MAC800 has created great interest internationally Since its introduction in 2003, the MAC800 has generated interest internationally. Great interest from both domestic customers in Denmark and JVL's worldwide representatives has resulted in a significant number of these motors being tested and installed with several large international end-users. Interest from customers has typically been based on...

Read More »
AC Motors

Disc Valve Motor targets off-highway applications.

High Pressure 30 (HP30) disc valve motor features no-load pressure drop of less than 200 psi at 25 gpm flow. It is designed for mobile off-highway applications requiring up to 30,000 lb-in. of intermittent torque and provides continuous pressure of 4,500 psi at 45 gpm, intermittent pressure of 5,070 psi at 70 gpm, and maximum inlet pressure of 6,000 psi. Optional hydraulic parking brake offering...

Read More »
AC Motors feature finned frame construction.
AC Motors

AC Motors feature finned frame construction.

Totally enclosed, inverter duty Models FL180, FL210, and FL250 feature premium class H insulation, 3 normally closed thermostats, and Corona Free design. Model FL180 incorporates heavy-duty finned aluminum frame, while Models FL210 and FL250 have finned laminated steel frames. Available in NEMA and IEC designs, all motors are suited for IP54 and IP55 washdown applications, and include cast iron...

Read More »
Limited Angle Torque Motors deliver ripple-free motion.
AC Motors

Limited Angle Torque Motors deliver ripple-free motion.

Available in standard and custom designs, Torquers are single-phase, brushless motors offered in kit and housed styles. MR series provides angular excursions to 180° and features toroidally wound iron core stator with 2-, 4-, or 6-pole permanent magnet rotors. Arc segmented, multi-pole permanent magnet stator motors in WR series have copper magnet wire rotor for excursions less than...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Brush DC Motor suits space-restricted applications.
AC Motors

Brush DC Motor suits space-restricted applications.

Featuring internal, long-life brushes and Neodymium magnets, SR15 Series has 1.5 in. dia design that produces continuous torque up to 25 oz-in. and peak torque up to 150 oz-in. It can accelerate rapidly with limited impact to system, and its dual ended shaft facilitates optical encoder installation. Various electrical and mechanical options are available, including windings for specific power...

Read More »
Custom AC Motors offer multiple configuration options.
AC Motors

Custom AC Motors offer multiple configuration options.

AC motors, available with several winding configurations, come in 34 and 49 frame. With 3.3 in. OD, 34 frame has power range of 1/80-1/10 hp and Â-½ in. standard shaft diameter. Also featuring ½ in. standard shaft diameter, 49 frame has 4.9 in. OD and power range of 1/10-¼ hp. Products are offered in PSC, split phase, 3-phase, and 3-phase inverter styles.

Read More »
AC Motors

Industrial AC Motors meet or exceed NEMA standards.

Rated up to 20 hp, Industrial AC Motors are offered in aluminum, cast iron, and severe-duty cast iron frame configurations. Specially designed cooling fins, polypropylene fan, and internal cooling scheme minimize heat build-up. Rotating assembly incorporates anti-friction bearings, polyurea-based grease, dynamically balanced rotor, and precision-machined mating surfaces. Insulation system meets...

Read More »
Stepper Motor accommodates microwave tube.
AC Motors

Stepper Motor accommodates microwave tube.

Suited for military and heavy duty automation applications, hollow pancake stepper motor provides 1.8° step angle and 400 oz-in. of torque. At 5.7 in. dia and 1Â-¼ in. thick, motor accommodates microwave tube through 2½ in. central hole. Standard configuration includes ball bearings. Optional coils are available in wide voltage range with bipolar or unipolar configuration.

Read More »
Inverter Duty Motors/Gearmotors work in factory automation.
AC Motors

Inverter Duty Motors/Gearmotors work in factory automation.

Pacesetter(TM) AC inverter duty motors, gearmotors, and AC variable speed controls feature Quintsulation(TM) 5-stage insulation system. Protected against spikes and corona damage caused by inverter, motors and gearmotors are rated from 1/25-Â-¾ hp, 230 Vac, 60 Hz, 3-phase. Fan-cooled, totally enclosed units feature aluminum center ring and endshields as well as hardened helical output...

Read More »
AC Motors

Inverter Duty Gearmotors suit conveyor applications.

Totally enclosed, fan-cooled, reversible motors are 3-phase, 230 V, 50/60 Hz units that can accept optional external brake. Rated from 2-30 rpm @ 6 Hz and 26-437 rpm @ 90 Hz, products include Â-¼ hp models in 200 and 650 Series and ½ hp models in 400 and 650 Series. AC gearmotors use variable frequency inverter drives to offer constant torque from 6-60 Hz input and constant...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers