AC Motors

AC Motors

Disc Valve Motor targets off-highway applications.

Featuring no-load pressure drop under 13.6 bar at 70 lpm flow, Char-Lynn® HP30 high-pressure, 30,000 lb-in. torque disc valve motor provides continuous operation with flow of 170 lpm at 310 bar, intermittent operation at 265 lpm and 345 bar, and maximum inlet pressure of 400 bar. All motors are available with HTLS and HSLT switchable capability. They are suited for mobile off-highway...

Read More »
NEW! World K Series Induction, Reversible and Electromagnetic Brake Motors
AC Motors

NEW! World K Series Induction, Reversible and Electromagnetic Brake Motors

Oriental Motor has expanded it's World K Series AC motor product line. All World K Series models have a built-in overheat protection device and conform to major international safety standards. UL/CSA standards, CE marking and now carry the CCC (China Compulsory Certification system) mark. A Protective Earth terminal has been added for additional safety and the motors conform to the RoHS...

Read More »
AC Motors

AC Servo Motors and Amps suit motion control applications.

VersaMotion AC Servo Motors and Amplifiers can be combined with VersaMax Micro for low-end position control applications or used as standalone single-axis position controller for indexing or electronic gear follower applications. Flexibility of command interface and user-defined operating modes translates to variety of system architectures. While power ratings range from 100 W to 3 kW, continuous...

Read More »
TEFC Motors suit general-purpose applications.
AC Motors

TEFC Motors suit general-purpose applications.

Rated at 208-230/460 V, 3-phase, 60 Hz, Elektrimax explosionproof and 56C NEMA AC Motors are equipped with vacuum pressure impregnated windings and oversized bearing on drive end. They are designed with rigid cast iron frame and Class F insulation with Class B rise. Featuring corrosion-resistant epoxy coating and IP55 protection rating, motors are EPACT Certified, C-CSA-US approved, and CE...

Read More »
AC Motors

12mm Miniature Stepper Motor

Clearwater, Florida (December 19, 2006) - MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220 has a holding torque without current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. The ADM1220...

Read More »
AC Motors

Hybrid Motor suits high-power motion control applications.

Specified for 460 or 400 Vac standards, Allen-Bradley High-Power Kinetix (HPK) Series combines induction and servo motor technology to promote precision and efficiency in material handling or web converting applications. Electrical winding design is optimized to mimic speed/torque curve of permanent magnet servo motors. Supplied in ratings up to 150 hp, motors are equipped with single- or...

Read More »
AC Motors

Raser Announces Multiple Agreements for Mass-Production Qualification of Symetron(TM) Enhanced AC Induction Motors and Automotive Alternators

February 28, 2007 Agreements with Multiple Manufacturers Include Both Industrial and Automotive Markets PROVO, Utah--Raser Technologies, Inc. (NYSE Arca: RZ) announced today that it has entered into two separate agreements for the testing and mass-production qualification of its Symetron(TM) electric motor and alternator technologies. The first agreement is with one of the largest AC motor...

Read More »
AC Motors

ARM7-Based Motor Control Development Kit from STMicroelectronics Simplifies Vector Drive Design for Cost-Sensitive Applications

GENEVA, Feb. 27 // -- STMicroelectronics (NYSE:STM) today announced a new motor control kit, built around the recently-announced 32-bit STR750 microcontroller, which enables the rapid development of high- performance vector-control applications, using both Permanent Magnet Synchronous Motors (PMSM) and 3-phase AC Induction Motors, for cost-sensitive appliance, industrial and HVAC (heating,...

Read More »
AC Motors

MAC Motors Now In Use World-Wide

MAC800 has created great interest internationally Since its introduction in 2003, the MAC800 has generated interest internationally. Great interest from both domestic customers in Denmark and JVL's worldwide representatives has resulted in a significant number of these motors being tested and installed with several large international end-users. Interest from customers has typically been based on...

Read More »
AC Motors

Disc Valve Motor targets off-highway applications.

High Pressure 30 (HP30) disc valve motor features no-load pressure drop of less than 200 psi at 25 gpm flow. It is designed for mobile off-highway applications requiring up to 30,000 lb-in. of intermittent torque and provides continuous pressure of 4,500 psi at 45 gpm, intermittent pressure of 5,070 psi at 70 gpm, and maximum inlet pressure of 6,000 psi. Optional hydraulic parking brake offering...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics