Abrasive Coated Discs

Trimmable Abrasive Flap Disc ranges from 40-120 grit.
Abrasive Coated Discs

Trimmable Abrasive Flap Disc ranges from 40-120 grit.

Trimmable Cyclone(TM) features composite backing that can be trimmed up to 3/8 in. from original diameter, extending life of disc. By trimming backing material away, flap length is extended, enabling operator to access hard-to-reach areas such as right angles and irregular shapes. Non-marking backing will not damage work-piece. Made with zirconium abrasive grain, Trimmable Cyclone is available in...

Read More »
Flap Disc suits grinding and finishing applications.
Abrasive Coated Discs

Flap Disc suits grinding and finishing applications.

Constructed of 100% zirconia alumina grain with poly/cotton heat-treated backing, Z3 Ultimate Flap Disc is available in 4 Â-½ in. with grit sizes from 36-80. It contains less than .01% iron, sulfur, and chlorine. Wide abrasive material serves to prevent overheating, allows zirconia to break down, and extends life of disc. Disc minimizes impact when grinding metal, allowing users to control...

Read More »
Abrasive Coated Discs

Flap Disc Abrasives grind and finish metals.

Available in 4Â-½, 5, and 7 in. sizes, Abrasive Flap Discs are made from aluminum oxide discs with zirconia abrasive grain bonded to cloth backing material. They come in flat, extra thick, and conical configurations, and provide grinding and finishing in one operation. Fiberglass backing pad is flexible, providing optimal control for even disc wear.

Read More »
Abrasive Coated Discs

Abrasive Flap Disc features trimmable design.

Tiger Disc(TM) enables operator to trim away back of disc up to 3/8 in. from original diameter, exposing more flap abrasive. By trimming backing material away, flap length is extended, allowing users to access areas such as right angles and irregular shapes, or grind on-edge without changing tools. Non-marking backing will not damage workpiece, minimizing re-work and scrap.

Read More »
Abrasive Flap Discs fit right angle air tools.
Abrasive Coated Discs

Abrasive Flap Discs fit right angle air tools.

BobCat(TM) Flap Discs replace small-diameter, coated blending discs for weld blending and finishing purposes. High stock removal and finish consistency can be achieved in one step. Featuring zirconium grain, discs come in 2 and 3 in. sizes and in angled and flat configurations with grit sizes from 36-120 Z. Angled discs provide maximum agression and are best used at angles from 15-25°. Flat...

Read More »
Discs and Rolls suit demanding sanding applications.
Abrasive Coated Discs

Discs and Rolls suit demanding sanding applications.

Suited for sanding primed and painted composites, wood, and non-ferrous metals, Norton SG® A975 discs and rolls utilize SG seeded-gel P-graded grain that offers aggressive cut rates and cool cutting action. They are available in 5 and 6 in. Stick and Sand® disc rolls and Speed-Grip® discs with or without vacuum holes. Provided in 10 grit sizes from P80-P400, products have...

Read More »
Flap Discs are made of stainless steel cloth.
Abrasive Coated Discs

Flap Discs are made of stainless steel cloth.

Cyclone(TM) Stainless Steel Flap Discs are for grinding stainless steel in weld blending, deburring, deflashing, stock removal, and dressing applications. Discs are made of long-life abrasive cloth to reduce cost-per-piece. Fast-cutting cloth prevents dulling and glazing of abrasive grains and phenolic backing prevents gouging. Offered in 4 1/2 and 7 in. diameters, discs come in 60 or 80 grit.

Read More »
Flap Discs conform to curved and irregular surfaces.
Abrasive Coated Discs

Flap Discs conform to curved and irregular surfaces.

Big Cat(TM) abrasive discs are offered in both 4Â-½ in. and 7 in. sizes, with or without 5/8 in. to 11 nut. High density Type 27 configuration adds flexibility for smoother grinding action and less operator fatigue. Phenolic-backed discs are available in aluminum oxide and zirconium. Typical applications include weld blending, grinding, deburring, deflashing, stock removal, surface finishing...

Read More »
Abrasive Coated Discs

Flap Discs suit light-pressure applications.

Z-Stainless flap discs offer zirconia alumina concentration with aluminum oxide blend. Discs' third layer, resin grinding aid, contains lubricants and allows zirconia to break down to reduce heat on stainless steel and heat-sensitive materials. Resin bond withstands temperatures generated when using coated abrasives at speeds of 16,000 surface fpm. Offered in Type 27 and 29, available sizes are...

Read More »
Abrasive Cloth features multi-layer construction.
Abrasive Coated Discs

Abrasive Cloth features multi-layer construction.

COMPACTGRAIN, available in belt and disc form, uses granulate consisting of many abrasive grains bonded together, allowing product to systematically wear by constantly regenerating new sharp grinding points throughout finishing process. Type KK718X features aluminum-oxide grain attached to cloth backing and is used in wet grinding. Type KK712X has aluminum-oxide grain with strong cloth that...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics