Compact Marking Unit suits short-run applications.
Featuring compact, programmable design, DOTStar 520 provides permanent, flexible marking on metal and plastic workpieces.Ã- Unit features 120 x 100 mm marking area that allows for text of one or more lines in free scalable size, along with angles, circular arcs, and date, time, and consecutive numeration. Operating with dynamic stepping motors and low noise drive belt, unit accommodates 7 x...
Read More »
Twin Table Robotic Grit-Blast System minimizes downtime.
Featuring 2 servomotor-driven turntables on- shuttle transfer cart for facilitated loading/unloading during automated grit blasting cycle, RB-72 TT is designed for descaling and surface preparation of components up to 66 in. dia and 4,000 lb. Other features include 6-axis Fanuc M-710iA robot, Fanuc R-30iB controller, and safety light curtains. Scanner wand at each side of robotic grit...
Read More »
Twin Table Robotic Grit-Blast System minimizes downtime.
Featuring 2 servomotor-driven turntables onÃ- shuttle transfer cart for facilitated loading/unloading during automated grit blasting cycle, RB-72 TT is designed for descaling and surface preparation of components up to 66 in. dia and 4,000 lb. Other features includeÃÂ 6-axis Fanuc M-710iA robot, Fanuc R-30iB controller, and safety light curtains. Scanner wand at each side of robotic grit...
Read More »
Rotary Wet Blast System operates in manual, semi-automatic modes.
Model SS-10 SA employs 5- wet blast guns and uses abrasive- or bead-type media for dustless blast cleaning, descaling, surface preparation, and cosmetic finishing of components. Fabricated from non-corroding composite material, 60 x 70 in. blast cabinet stands 96 in. tall. Wet blasting chamber interior is lined with sheet rubber, and 50 x 50 in. swing door provides access to blast enclosure on...
Read More »
Achieving Quality and On-Time Delivery
With decades of experience in machining, COMCO Plastics has developed a reputation for precision in fabricating products to spec. Learn more about our quality standards, and why having those standards in place is so important for a business.
Read More »
Rotary Wet Blast System operates in manual, semi-automatic modes.
Model SS-10 SA employs 5Ã- wet blast guns and uses abrasive- or bead-type media for dustless blast cleaning, descaling, surface preparation, and cosmetic finishing of components. Fabricated from non-corroding composite material, 60 x 70 in. blast cabinet stands 96 in. tall. Wet blasting chamber interior is lined with sheet rubber, and 50 x 50 in. swing door provides access to blast enclosure...
Read More »
Waterjet Intensifier Pump suits shops with limited power.
Drawing 37 full load amps at 460 Vac or 74 full load amps at 230 Vac, 30 hp Model iP60-30 produces 0.6 gpm of ultra-high pressure water at continuous operating pressure of 55,000 psi. Tie-rod design eliminates threads on high pressure cylinders, end caps, and hydraulic cylinders, while matched metal components prevent galling of hydraulic components. Pump includes hydraulic accumulator which...
Read More »
Waterjet Intensifier Pump suits shops with limited power.
Drawing 37 full load amps at 460 Vac or 74 full load amps at 230 Vac, 30 hp Model iP60-30 produces 0.6 gpm of ultra-high pressure water at continuous operating pressure of 55,000 psi. Tie-rod design eliminates threads on high pressure cylinders, end caps, and hydraulic cylinders, while matched metal components prevent galling of hydraulic components. Pump includes hydraulic accumulator which...
Read More »
Larger Parts Cleaning Unit is pneumatically driven.
With opening diameter sized to permit cleaning of- larger parts, 12 in. MiJET™ uses one existing shop air-line at CNC machine for operation and captures coolants for reuse. This pneumatically driven parts cleaning and collection unit also captures chips for recycling. With one-touch operation, parts can be blown off and cleaned immediately after machining while machine continues to cut...
Read More »
Larger Parts Cleaning Unit is pneumatically driven.
With opening diameter sized to permit cleaning ofÃ- larger parts, 12 in. MiJET™ uses one existing shop air-line at CNC machine for operation and captures coolants for reuse. ThisÃÂ pneumatically driven parts cleaning and collection unit also captures chips for recycling. With one-touch operation, partsÃÂ can be blown off and cleaned immediately after machining while machine...
Read More »
Shot Peen Machine features dual media capacity.
Accommodating parts weighing up to 1,000 lb and measuring up to 40 x 40 in., Shot Peen Machine has dual media capacity that involves 6-axis robotics and visual shot peen software designed to use different size shot peen media in back-to-back processes. Machine uses only conditioned, cut wire steel shot for durability and consistency in particle size and shape.
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
