Aerospace Internal Pipe Blasting | ABS Custom Sandblast Equipment
Abrasive Blast Systems recently designed and installed a custom blast solution which allows the customer to blast the inside of various sizes of pipes/tubing. The blast lance on this system can be manipulated vertically to center itself within the pipe's ID, and when started, it runs horizontally throughout the full length of the pipe to blast the entirety of the interior surface. The head of...
Read More »Surface Cleaning/Preparation Solution uses wet-ice technology.
By producing frozen water particles and propelling them at high speeds, Generation One cleans, decontaminates, and prepares surfaces. Use of this industrial cleaning solution results in negligible airborne contaminants, no additional media, and zero chemicals. Able to replace existing methods that harms environment, this technology has been employed in such industries as petrochemical, pulp and...
Read More »
Robotic System offers grit-blast surface preparation.
Designed for surface preparation of gas turbine blades and buckets up to 1 m in length, Model RB-10 features 60 x 60 in. finishing chamber with heavily reinforced 60 x 48 in. vestibule at rear to house ABB Robotics IRB-2600 robot, which directs single pressure-blast nozzle. Turntable inside blast enclosure, measuring 24 in. in diameter, is servomotor-driven and controlled as seventh axis of...
Read More »
Industrial Batch Parts Washer improves operational efficacy.
Able to heat wash water between 140 to 190°F, RW 2836 featuresÂ- 7.5 hp, reservoir-mounted, vertical, centrifugal pumps for ~65 gpm capacity at ~60 psi. Rotated by ½ hp gear motor, 28 in. dia workbasket has work clearing height of 36 in. Weight load capacity is 1,000 lb, and table is located in off center cabinet position to...
Read More »
Choosing the Right Type of Chemical Gauge
Understanding the Differences in Chemical Gauges and Their Material Options
Read More »
Wet Tumble-Blasting System features compact design.
Featuring 36 x 42 in. blast enclosure, Wet Tumble-Blasting System provides batch finishing, deburring, and surface preparation of small components using liquid abrasive blasting technology. Enclosure, 15-gal slurry hopper, and drip tray are 12-gauge, 304 SS to resist corrosion. Two 90° angle wet blast guns with boron carbide nozzles are rigidly bracketed in position inside blasting chamber,...
Read More »
Robotic Lance Blasting System natively supports 2 grit sizes.
With extended lance nozzle, robotic blast system handles precision grit blasting and surface preparation of IDs of industrial gas turbine components in manufacturing and repair operations. Features include Fanuc M-710iC robot as lance manipulator, process chamber withÂ- servomotor-driven rotary table, and touchscreen HMI. Media reclamation and delivery system for 2 different grit...
Read More »
Compact Marking Unit suits short-run applications.
Featuring compact, programmable design, DOTStar 520 provides permanent, flexible marking on metal and plastic workpieces.Â- Unit features 120 x 100 mm marking area that allows for text of one or more lines in free scalable size, along with angles, circular arcs, and date, time, and consecutive numeration. Operating with dynamic stepping motors and low noise drive belt, unit accommodates 7 x...
Read More »
Twin Table Robotic Grit-Blast System minimizes downtime.
Featuring 2 servomotor-driven turntables onÂ- shuttle transfer cart for facilitated loading/unloading during automated grit blasting cycle, RB-72 TT is designed for descaling and surface preparation of components up to 66 in. dia and 4,000 lb. Other features include 6-axis Fanuc M-710iA robot, Fanuc R-30iB controller, and safety light curtains. Scanner wand at each side of robotic...
Read More »
Rotary Wet Blast System operates in manual, semi-automatic modes.
Model SS-10 SA employs 5Â- wet blast guns and uses abrasive- or bead-type media for dustless blast cleaning, descaling, surface preparation, and cosmetic finishing of components. Fabricated from non-corroding composite material, 60 x 70 in. blast cabinet stands 96 in. tall. Wet blasting chamber interior is lined with sheet rubber, and 50 x 50 in. swing door provides access to blast enclosure...
Read More »
Waterjet Intensifier Pump suits shops with limited power.
Drawing 37 full load amps at 460 Vac or 74 full load amps at 230 Vac, 30 hp Model iP60-30 produces 0.6 gpm of ultra-high pressure water at continuous operating pressure of 55,000 psi. Tie-rod design eliminates threads on high pressure cylinders, end caps, and hydraulic cylinders, while matched metal components prevent galling of hydraulic components. Pump includes hydraulic accumulator which...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »
