Abrasive Blast Equipment

Dry Ice System is used for blast cleaning, product finishing.
Abrasive Blast Equipment

Dry Ice System is used for blast cleaning, product finishing.

Using shaved dry ice and feeder technologies technology, i3 MicroClean provides precision plastic manufacturers with environmentally responsible and safe way to clean products with delicate surfaces and complex mold cavities and crevices. Cleaning is performed without abrasion and while molds are still hot and in press. Along with variable feed that allows for optimized ice-to-air ratio and...

Read More »
Descalers

Descaling/Cleaning Systems uniformly treat structural shapes.

Incorporating standard and customized components to meet unique customer requirements, Structural Steel Shot Blast Cleaning systems are designed for descaling and cleaning structural shapes before or after fabrication. Model 2436 uses Autoblast® wheels and has 24 in. wide x 36 in. high cleaning envelope and variable-speed roll conveyor. All systems use recyclable steel abrasive and feature...

Read More »
Miscellaneous Cleaning Equipment

Airblast Systems provide bit peening for mining industry.

Using multiple-axis nozzle manipulation and part movement, Wheelabrator® Automated Airblast Systems allow for repeatability when peening ID and OD of rock drill bits. Systems feature steel blast cabinet and door-mounted rotary table that permits drill to be in shank-down position while peening face and button hole. Additional features include touchscreen interface, closed-loop feedback and...

Read More »
Abrasive Blast Equipment

Shot Blast Machines clean plates up to 15 ft wide.

Offered in 3 models, fully-automated Wheelabrator® systems descale and remove rust from plate and structural members. These horizontal shot blast plate machines, developed to meet needs of various industries, effectively clean large work pieces and can be integrated into Wheelabrator Preservation Lines for automatic painting. Each model comes equipped with pass height range of 20-48 in.,...

Read More »
Wheelabrator Automated Airblast Peening System
Landing Systems

Wheelabrator Automated Airblast Peening System

Peening landing gear for the Aerospace industry Burlington, ON - (May 18, 2009) - In August 2008, a Wheelabrator Automated Airblast Peening system was commissioned at Hawker Pacific Aerospace; the first in its Sun Valley, California facility. For more than half a century, Hawker Pacific Aerospace has been a leading independent landing gear overhaul and repair organization with a reputation for...

Read More »
Pressure Washers feature wet sandblasting systems.
Pressure Washing Equipment

Pressure Washers feature wet sandblasting systems.

Able to remove rust, corrosion, and heavy deposits, Super Max® machines can be used with range of sand grit sizes as well as different media. Models 8900C-840WS and 8950C-840WS are gas-powered cold-water machines that produce pressures to 4,000 and 5,000 psi and flow rates to 4 and 5 gpm, respectively. Models 7000WS and 9000WS are electric-powered tri-mode (steam and hot/cold water)...

Read More »
Abrasive Blast Equipment

Wheelabrator Group Reduces Re-cleaning Requirements at Union Foundry

Burlington, ON - (May 6, 2009) - Union Foundry Company, a division of McWane Corporation, approached Wheelabrator Group to replace an aging non-Wheelabrator continuous machine that had outgrown its capabilities within its Anniston, Ala., facility. As a leader in municipal water treatment systems, the company was looking to reduce its re-clean requirements of iron castings. As an existing...

Read More »
Rotary Positioning Stages / Tables

Rotary Mesh Table cleans small parts off-line.

Constructed of 3/8 in. thick manganese steel, Rotary Mesh Table processes aluminum die-castings, forgings, flame-cut shapes, and automotive parts. It is equipped with 20 in. wide manganese wire-mesh conveyor table with variable speed drive. Airless blast system consists of four 13.5 in. dia Autoblast® wheel assemblies, direct driven by 10 hp motors. Abrasive is contained by drop-in style...

Read More »

Wheelabrator Railcar Blasting Systems: Providing Manual and Automated Blast Cleaning for the Railcar Industry

Burlington, ON - (April 15, 2009) - Wheelabrator® technology continues to play an important role in increasing productivity in the new and refurbished railcar industry. Manual Airblast and Autoblast® airless blasting systems clean the inside and outside surface of railcars. With a long history of performance, these Wheelabrator blast cleaning systems continually enter the marketplace....

Read More »

Wheelabrator Wire Mesh Belt Systems: Blast Wheels are Oriented to Achieve Maximum Surface Preparation Needs

Burlington, ON - (April 17, 2009) - Each Wheelabrator® system is designed with versatility in mind, accommodating diverse part shapes and textures. Foundries, die casters, permanent mold operations, fabricators and forge shops turn to this system for their cleaning needs. Die cast components, pipe fittings, crankshafts, weldments, forgings and sand castings are some of the common cleaning...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics