Thermal Imagers suit building diagnostics applications.

Press Release Summary:




Intended for HVAC/R and IAQ professionals, Fluke TiR Series IR Flexcam(TM) Thermal Imagers feature IR Fusion(TM) technology, which pinpoints building problems by combining visible light and thermal images for optimal identification, analysis, and image management. Units include 20 mm germanium lens on 180° articulating mount and 5 in. color LCD to view on-camera images. SmartView(TM) software lets users annotate, view, edit, and analyze IR images, as well as generate customized reports.



Original Press Release:



Fluke TiR Series IR Flexcam(TM) Thermal Imagers Deliver Expert Features for Building Diagnostic Applications



IR Fusion(TM) technology integrates visible and thermal images for more accurate identification, analysis and management

EVERETT, Wash. - Fluke Corporation, the global leader in handheld electronic test and measurement technology, today announced the Fluke TiR Series IR Flexcam(TM) Thermal Imagers, designed specifically for building diagnostics applications. Fluke TiR Series imagers feature IR Fusion(TM) technology, which helps expert users accurately pinpoint building problems by combining both visible light and thermal images for better identification, analysis and image management.

Part of a growing line of Fluke test tools designed specifically for HVAC/R and indoor air quality (IAQ) professionals, the Fluke TiR Series includes six models: the TiR2 and TiR2-FT, the TiR3 and TiR3-FT, and the TiR4 and TiR4-FT. TiR Series models provide a large five inch color liquid crystal display (LCD) to view on-camera images, high resolution, low noise Vanadium Oxide (VOx) detector (320 x 240 on select models) for high-quality images, and thermal sensitivity of ≤ 0.05 °C NETD on select models for viewing even the smallest temperature differences.

Designed for ease of operation in a wide range of building diagnostics environments, the Fluke TiR Series Thermal Imagers feature a 20 mm germanium lens on a 180 degree articulating mount to view images, even in situations where access is limited. The TiR Series features one-finger SmartFocus operation, which enables users to quickly capture high-quality images and accurate temperature measurements.

Fluke SmartView(TM) software is included with each Fluke TiR Series Thermal Imager. SmartView software is a modular suite of tools that allows users to annotate, view, edit and analyze IR images, as well as generate fully-customized, professional-looking reports in a few steps. The TiR2 and TiR4 models include built-in auto-capture, alarm and analysis functions for diagnosing intermittent problems.

Use the Fluke TiR Series Thermal Imagers for applications including:
o Roofing Surveys: Detect wet areas in roofing systems quickly and efficiently. Find wet portions of the roofing structure and repair or replace before the entire roof is damaged.
o Energy Audits: Perform infrared energy audits for residential and commercial applications. Increase the thermal efficiency of a home or building by scanning for thermal heat loss, air infiltration or exfiltration, or air delivery problems.
o Moisture/Restoration: Accurately detect moisture issues located behind exterior and interior walls, in ceilings or under carpet-covered floors.
o Mold Remediation: Control mold by finding unknown sources of moisture that would otherwise go undetected.

IR Fusion Technology
IR-Fusion technology facilitates real time pixel-for-pixel merging of infrared and visible light images together on a single display. Providing five viewing modes - each designed to add greater clarity, accuracy and a valuable frame of reference to infrared images - IR-Fusion is the only technology to allow users to manipulate images right on the camera's display and is designed specifically to allow users to find problems not commonly detected with similar infrared imaging cameras.

IR-Fusion captures infrared and visible light images and simultaneously displays the images fused together, adding a new dimension of detail that saves time and money and best conveys infrared information of each specific application and environment. Viewing modes include:
o Full Infrared - high-resolution standard infrared images.
o Full Visible Light - pixel-for-pixel, visible light digital reference control images at 1.3 mega-pixel resolution.
o Picture-in-Picture - an IR image portal surrounded by a frame of visible light for reference.
o Alpha Blending - combines infrared and visible light images blended together at user-adjustable levels for the greatest image clarity.
o IR/Visible Alarm - displays only the portions of the image that fall above, below or between a user-specified temperature range as IR, leaving the remainder of the image as full visible light.

IR-Fusion makes it easier to identify details and potential problems by managing and analyzing images with complete control over both the infrared and visible light spectrums. The ability to fuse images on-camera and optimize images in real-time, combined with an exclusive on-screen, laser pointing indicator, improves primary target identification, enhances issue locating efficiency and offers a tremendous advantage in reporting clarity.

Pricing and Availability
The Fluke TiR Series Thermal Imagers are available immediately for US list prices of: $12,495 for the TiR2; $15,490 for the TiR2-FT; $16,495 for the TiR3; $19,490 for the TiR3-FT; $19,995 for the TiR4; and $22,990 for the TiR4-FT. For more information on Fluke TiR Series Thermal Imagers and other Fluke tools for HVAC/IAQ professionals, visit www.fluke.com/iaq, or contact Fluke Corporation, PO Box 9090, Everett, WA USA 98206, call (888) 308-5277, fax (425) 446-5116, or e-mail fluke-info@fluke.com.

Fluke Corporation
Fluke Corporation is the world leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians and metrologists who install, troubleshoot, and manage industrial electrical and electronic equipment and calibration processes for quality control.

All Topics