Switching Multiplexer is available with de-emphasis option.
Share:
Press Release Summary:
Enabling receiver characterization for server and other data-center interfaces, M8061A offers built-in, 8-tap de-emphasis that allows engineers to emulate transmitter de-emphasis and channels and compensate losses in test setup. This 28.4 Gbps multiplexer is transparent to jitter from J-BERT and provides additional clock/2 jitter injection capabilities. Built-in superposition of level interference eliminates need for external power splitters.
Original Press Release:
Agilent Technologies Introduces 28.4-Gb/s Multiplexer with De‑emphasis Option
Product Enables Accurate Characterization of Receivers Used in Servers, Storage Systems and Data-Center Networks
SANTA CLARA, Calif. – Agilent Technologies Inc. (NYSE: A) today introduced a 28.4-Gb/s multiplexer with optional de-emphasis with up to eight taps for R&D and test engineers who need to characterize receivers for next-generation servers, storage systems and data-center networks. The multiplexer expands the pattern generator bit rate of the J-BERT N4903B high-performance bit error ratio tester.
To manage the increasing demand for higher bandwidth, lower power consumption and increased interconnect reach, many new network interface standards are emerging, along with new backplane, active cable, storage and proprietary interfaces. Physical bit rates of approximately 25-Gb/s NRZ (non-return-to-zero data format for one lane) are common in the latest industry standards such as IEEE 802.3 100-Gb Ethernet, CFP2, OIF CEI and 32-G Fibre Channel.
Design and test engineers who need to characterize 25-Gb/s receiver ports face one big challenge: margins are getting extremely tight. To achieve repeatable test results and sufficient design margins, test equipment must be ultraprecise. Most electrical 25-Gb/s interfaces use multitap de-emphasis transmitters to compensate for the signal degradations of the channel. Receiver testing requires an error detector to ensure the receiver can properly detect received bits even under worst-case signal conditions. The stress is emulated by a pattern generator with timing jitter and level interference injection capabilities.
Agilent’s M8061A 28-Gb/s multiplexer with optional de-emphasis enables the most accurate receiver characterization for server and other data-center interfaces.
“We are pleased to offer our customers another expansion of our industry-leading J-BERT to help them address the test challenges of up to 28-Gb/s designs,” said Juergen Beck, general manager of Agilent’s Digital Photonic Test Division. “Once again, we have demonstrated our commitment to enabling R&D teams to release robust, high-speed digital designs for the next generation of server and data-center infrastructure.”
The M8061A 28.4-Gb/s multiplexer with optional de-emphasis delivers the most accurate and repeatable receiver characterization results because of the built-in and unique eight-tap de-emphasis, which allows engineers to emulate transmitter de-emphasis and channels and compensate losses in the test setup. The M8061A is transparent to jitter from J-BERT and provides additional clock/2 jitter injection capabilities. The unique, built-in superposition of level interference eliminates the need for external power splitters that can cause level and signal degradations.
The M8061A allows engineers to characterize next-generation computing buses operating above 14 Gb/s and data-center I/Os. When engineers use the M8061A with J-BERT N4903B, they can generate loopback training sequences. The M8061A’s DC-coupled output allows engineers to generate unbalanced bit patterns without level drift, and it can be switched to an electrical idle state for computer bus receiver tests such as those required for PCI Express®.
The 28-Gb/s multiplexer with de-emphasis option can be added to an existing J-BERT test setup to allow 28-Gb/s measurements with minimal investment. The equipment can be used to test multiple-gigabit test applications, such as PCIe®, USB, SATA, QPI, Hypertransport, Thunderbolt, DisplayPort, SD UHS-II, MIPI™ M-PHY, backplanes, 10-Gb Ethernet and 100-Gb Ethernet, SFP+ and CFP2 interfaces.
More information about the Agilent M8061A multiplexer with de-emphasis is available at www.agilent.com/find/M8061A. Photos of the solution are available at www.agilent.com/find/jbert_images.
For accurate receiver characterization Agilent offers several complementary test instruments: the J-BERT N4903B high-performance serial BERT, the N4877A and N1075A 32-Gb/s clock data recovery system with demultiplexer, the 81490A reference transmitter and the 86100D Infiniium DCA-X high-bandwidth oscilloscope.
U.S. Pricing and Availability
The M8061A multiplexer with de-emphasis (an AXIe two-slot module) is available now. The price starts at $45,750 for the multiplexer module, including a two-slot AXIe chassis with USB connection.
Agilent’s Digital Test Standards Program
Agilent Digital Test Standards Program experts are involved in various international standards committees, including the SD Association, Joint Electronic Devices Engineering Council, PCI-SIG®, Video Electronics Standards Association, Serial ATA International Organization, Serial Attached SCSI (T10), USB-Implementers Forum, MIPI Alliance, Ethernet standards (IEEE 802.3), Optical Internetworking Forum and many others. Agilent’s involvement in these standards groups enables the company to bring the right solutions to market when customers need them.
About Agilent Technologies
Agilent Technologies Inc. (NYSE: A) is the world’s premier measurement company and a technology leader in chemical analysis, life sciences, diagnostics, electronics and communications. The company’s 20,500 employees serve customers in more than 100 countries. Agilent had revenues of $6.9 billion in fiscal 2012. Information about Agilent is available at www.agilent.com.
MIPI is a licensed trademark of MIPI, Inc. in the U.S. and other jurisdictions.
PCIe, PCI Express and PCI-SIG are U.S. registered trademarks and/or service marks of PCI-SIG.
EDITORIAL CONTACTS:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Janet Smith
Americas
+1 970 679 5397
janet_smith@agilent.com
Twitter: @JSmithAgilent
