Solar Bypass Device offers surge protection for PV solutions.

Press Release Summary:



Equipped with CoolRUN™ technology, LX2410A IDEAL™ provides bypass path in PV module applications. Active bi-directional device handles up to 500 A of surge protection in forward and reverse direction. CoolRUN technology's non-hiccup control eliminates EMI radiating from PV module strings. Measuring 0.7 mm thick, product replaces Schottky diodes in junction boxes with under-the-glass solution. Pads are 2.6 mm apart to meet IEC61730-1 and IEC61730-2 creepage and clearance requirements.



Original Press Release:



Microsemi Announces Availability of LX2410A IDEAL Solar Bypass Device with Patented CoolRUN Technology



New Product Offers Improved Efficiency of Under-The-Glass Design, Superior Package Size Compliance and Lightning Strike Protection for PV Solutions



ALISO VIEJO, Calif., – Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced the availability of the LX2410A IDEAL™ solar bypass device with Microsemi's patented CoolRUN™ technology, designed to provide a bypass path in photovoltaic (PV) module applications. The LX2410A, a member of Microsemi's award-winning solar bypass family, reduces the cost and increases the reliability of photovoltaic solar modules by replacing the Schottky diodes in junction boxes with an under the glass, higher performance solution.



"Our new LX2410A IDEAL solar bypass devices provide unique advantages over competing products, including thinner packaging and better lightning strike protection capabilities," said Shafy Eltoukhy, vice president and business unit manager at Microsemi.



High current PV module applications require a bypass path as a protection mechanism to enable the array to produce power when one part of the array may be shaded or damaged. In addition the device is required to protect the array from lightning strikes. Microsemi's LX2410A is the industry's only bi-directional surge protection device designed to handle up to 500 amperes (amps) of surge protection in the forward and reverse direction, maximizing lifetime robustness and reliability of the device.



The thin package of the LX2410A with 0.7 millimeters (mm) maximum thickness is designed for mounting inside solar PV panels to shrink the junction box and reduce expensive copper wiring to and from the box. This minimizes system expense and enables higher power PV modules with smaller junction boxes and less copper losses for higher efficiency. The pads of the package are 2.6 mm apart to meet the IEC61730-1 and IEC61730-2 creepage and clearance requirements.



REC, the largest European brand of solar panels, has evaluated active bypass devices like the LX2410A in its next generation solar panels. According to the company's engineering team, the thin package and high efficiency of the LX2410A allow them to be installed under the front glass of REC's solar panels, reducing system costs by eliminating the need for a large junction box and excessive connection wires. REC has produced more than 15 million panels and is a PV technology leader with integrated manufacturing of polysilicon wafers, cells, panels and systems.



Unlike a Schottky diode, the LX2410A is an active device that has an extremely low voltage drop and reverse leakage current, resulting in increased PV module power output, negligible heat generation and temperature rise during operation. Its patented CoolRUN technology's non-hiccup control eliminates electromagnetic interference (EMI) radiating from PV module strings.



"Active bypass devices will replace Schottky diodes for improved efficiency and robustness in the next generation PV module designs," said Dr. Heribert Schmidt of the Fraunhofer-Institute ISE, Germany, a leading research institute for solar energy systems. "The devices also optimize module construction for lower overall system cost."



According to market research firm IHS, 57 gigawatts (GW) of PV power capacity is forecasted to be installed in 2015 worldwide, reflecting a 48 percent market growth since 2013. With each solar panel estimated at 250 watts (W) and using three bypass devices, the total addressable market (TAM) for these products is forecasted to be greater than 600 million devices in 2015.



Additional features of the LX2410A include:



--  12.5A is supported for International Electrotechnical Commission (IEC) testing

--  Low forward voltage drop: VF=95 mV @ IF=10 A, Tcase=110 degrees C

--  Low reverse leakage current: IR=12.5 uA @ VR=33 V, Tj=125 degrees C

--  500 amps of bi-directional lightning survivability per IEC 61000-4-5, part 6.1

--  Operating junction temperature range of -55 degrees C to 125 degrees C

--  Reverse voltage up to 33 V

--  Superior electrostatic discharge (ESD) performance



Availability

Microsemi's LX2410A is in production now. For more information, visit http://www.microsemi.com/existing-parts/parts/136636#overview  or email Sales.Support@Microsemi.com.



About Microsemi's Photovoltaic Solutions

Microsemi offers an extensive range of solutions for the PV market, supporting a wide array of applications in power harvesting, power management, power switching and power monitoring. With these products the PV designer can develop highly efficient and reliable, cost sensitive applications to meet the ever increasing demand of PV deployments worldwide. Microsemi carries an assortment of analog, mixed signal and digital devices, such as active bypass devices, Schottky diodes, SiC MOSFETs, SiC diodes and insulated-gate bipolar transistors (IGBTs), DC-to-DC converters, mixed-signal field programmable gate arrays (FPGAs), pulse width modulation (PWM) modules and much more. For more information, visit http://www.microsemi.com/applications/alternative-energy/photovoltaic-solutions.



About Microsemi

Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,600 employees globally. Learn more at www.microsemi.com.



Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.



CONTACT:

Farhad Mafie

VP Worldwide Product Marketing

949-356-2399



Beth P. Quezada

Director, Corporate Communications

949-380-6102

press@microsemi.com



Web Site: http://www.microsemi.com

More from Electrical Equipment & Systems

All Topics