Slides have timing belts with curvilinear profile.
Share:
Press Release Summary:
Blue Line Series 1 is available in lengths to 2 m with max speed of 2.4 m/s, while Series 3 comes in lengths to 3 m and handles speeds to 5 m/s. ZF 1 Series, 30 mm wide with 44 mm profile and 2:1 gear ratio, comes in lengths up to 3 m with max speed of 1.5 m. ZF 2 and 3 Series come in lengths up to 3 m with max speed of 5 m/s; ZF 2 has 2:1 gear reduction for increased torque. All slides have home position switches accurate to less than 0.1 mm and repeatability of travel less than 0.2 mm.
Original Press Release:
New Series of 5 Belt Driven Slides Offer Advanced HTD Timing Belt Drives at Low Cost
New Hyde Park, New York - A new series of 5 timing belt driven slides from Techno-Isel feature speeds up to 5 meters per second and many different motor and carriage configurations from stock. These slides, identified as the Blue Line 1, Blue Line 3, ZF 1, ZF 2 and ZF 3 Series slides offer exceptional value to end users and OEMs for a wide variety of automation applications.
All slides use an HTD timing belt, have home position switches accurate to less than 0.1 mm and repeatability of travel less than 0.2 mm. The Blue Line Series 1 is available in stock lengths to 2 meters. Maximum speed is 2.4 meters per second. The Blue Line Series 3 comes in stock lengths up to 3 meters and can handle speeds to 5 meters per second. The ZF 1 Series slide comes in stock lengths up to 3 meters. Maximum speed is 1.5 meters. The ZF 1 is very narrow (30 mm wide) and has a low profile (44 mm) and a 2:1 gear ratio is available. The ZF 2 Series slide comes in stock lengths up to 3 meters. Maximum speed is 5 meters per second. The ZF 2 comes standard with a 2:1 gear reduction for increased torque and inertia matching. The ZF 3 Series slide comes in stock lengths up to 3 meters. Maximum speed is 5 meters per second.
Of special interest is the HTD timing belt drive used on all 5 series of slides which feature a deep curvilinear profile for more positive non-slip operation when compared with the conventional trapezoidal tooth profile. This provides greater shear strength and smaller unit pressure per tooth since the area of contact is greater.
Additional technical specifications are contained in Bulletin H811 available free upon request from Techno-Isel, 2101 Jericho Turnpike, P.O. Box 5416, New Hyde Park, NY 11042-5416. Phone: 800-948-3246 Fax: 516-358-2576.