Press Release Summary:
Designed for calibrated resistive sensor modules, Model ZSSC3016 combines amplification, 16-bit A/D conversion, and 18-bit DSP for linearization and calibration functions. Unit operates from 1.8-3.6 V with overall current consumption of less than 1 mA, standby current of less than 250 nA, and intelligent power save scheme. Designed for altimeter module applications, Model ZSSC3016 is suited for use in mobile phones, sport watches, or outdoor GPS tracking systems.
Original Press Release:
ZMDI Launches New Generation of High-Precision 16-Bit Sensor Signal Conditioner Providing Energy Efficient High Accuracy Amplification and High Resolution Output
o Broad power supply range of 1.8 - 3.6 V
o Low current consumption of <1mA and stand-by current of <250nA
o Noise-free 16-bit output signal for altitude resolution of < 15cm at sea level
o Fully-corrected digital output signal simplifying the system design
o Power supply rejection ratio of up to 90dB at 2V for mobile devices
o One-pass calibration reduces BOM and manufacturing costs
Dresden, Germany, - ZMD AG (ZMDI), a global supplier of analog and mixed-signal solutions for consumer, industrial, and medical applications, today introduced a class-leading 16-bit sensor signal conditioning IC (SSC) for calibrated resistive sensor modules. The ZSSC3016 combines high accuracy amplification, 16-bit precision analog-to-digital conversion, and an 18-bit DSP for linearization and calibration functions. The high resolution sensor interface ASSP provides special features for battery driven low power devices, such as an overall current consumption of less than 1mA combined with an ultra low standby current of less than 250nA, operation voltages between 1.8 and 3.6V and an intelligent power save scheme to ensure lowest overall current consumption. Designed for high resolution altimeter module applications, the ZSSC3016 is ideal for use in mobile phones, sport watches or outdoor GPS tracking systems.
"Energy-efficiency is what we do best. We designed the ZSSC3016 to provide our customers with the required resolution and accuracy for their next generation battery products," said Michael Georgi, Engineering Manager at ZMDI. "Unlike many available products today, the ZSSC3016 comes with an internal signal correction and allows customers to minimize engineering efforts and costs."
With a practically noise free 16-bit output signal, the ZSSC3016 allows an altitude resolution of less than 15cm at sea level. It is accurate enough for barometric altitude measurement for portable navigation or emergency call systems, altitude measurement for car navigation, inside hard disk pressure measurement, and weather forecasting equipment. Modern consumer products, such as motion sensing sport equipment or multi-function watches greatly benefit from the ZSSC3016's precision. Medical products, which require this level of precision, include medical gas control, medical infusion pumps, ambulatory non-invasive pump systems, and occlusion detection systems.
The ZSSC3016 features an internal sensor supply regulator with an excellent power supply rejection ratio (PSRR) eliminating the need of an external buffer cap and making it attractive for mobile phones or other transmitters which are creating battery voltage dumps during operation.
The ZSSC3016 operates at a temperature range of -40°C to +85°C. Accuracy is less than ±0.10% FSO over the full temperature range. The ZSSC3016 can perform offset, span, and first and second order temperature compensation of the measured signal. Developed for correction of resistive bridge sensors, the ZSSC3016 can provide a corrected temperature output measured with an internal sensor. The measured and corrected bridge values are provided at the digital output pins, which can be configured as I2C or SPI.
Digital compensation of signal offset, sensitivity, temperature, and non-linearity is accomplished via an 18-bit internal digital signal processor running a correction algorithm. Calibration coefficients are stored on-chip in a highly reliable, nonvolatile, multiple-time programmable memory. Programming the ZSSC3016 is simple via the serial interface and the PC-controlled calibration software provided in the ZMDI Development Kit.
Availability & Pricing
The ZSSC3016 is available as die for wafer bonding. Parts are priced at 0.78 Euro / US$1.09 in volumes of 10k. Samples and wafer material are available now.
TThe URL for further product information is www.zmdi.com/products/sensor-signal-conditioner/zssc3016
Zentrum Mikroelektronik Dresden AG (ZMDI) is a premier supplier of innovative energy efficient analog and mixed-signal semiconductors for the automotive, mobile medical, industrial automation, and consumer markets. The Company's application-specific standard products (ASSPs) and application-specific integrated circuits (ASICs) are known for their robust, cost-effective performance in demanding environments characterized by high temperature, high voltage, and the need for ultra-low power. Headquartered in Dresden, Germany, ZMDI has 300 employees worldwide and serves customers from its offices in Dresden, Stuttgart, Germany; Milan, Italy; Pocatello, ID; Tokyo, Japan, Seoul, Korea and Taipei, Taiwan. ZMDI has design centres in Dresden, Stuttgart, Munich, Germany; Varna, Bulgaria and Limerick, Ireland. See more at www.zmdi.com.