Pyroelectric Laser Beam Profiling Camera serves OEM applications.

Press Release Summary:




Along with 80 µm pixel pitch, Pyrocam IIIHR has 160 x 160 pixel image array for profiling beams up to ½ in. without reduction optics. Pulsed and CW lasers, including CO2 and telecom NIR lasers and THz sources, can be measured from 13–355 nm and 1.06 to >3,000 µm. Interface to GigE camera supports high-speed applications, 16-bit ADC promotes reliable measurement and analysis of large and low level signals in wings of laser beam, and SNR of 1000:1 facilitates viewing of 30 mW/cm² beams.



Original Press Release:



Ophir-Spiricon Introduces Pyrocam IIIHR, OEM Version of Pyroelectric Laser Beam Profiling Camera for 2D/3D Viewing of DUV, Far-IR, THz Sources



San Francisco, CA — Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation company, today announced the newest member of the Pyrocam family of pyroelectric laser beam profiling cameras at Photonics West, the Pyrocam IIIHR. Designed for OEM applications, this camera features a sensitive, 160 x 160 pixel image array that can profile beams up to 1/2-inch (12.8 mm) without the need for reduction optics. The higher resolution, 80µm pixel pitch means it can analyze beams up to 20% smaller. Both pulsed and CW (continuous wave) lasers can be measured, from 13 to 355 nm and 1.06 to >3000 µm, including CO2 lasers, telecom NIR lasers, and THz sources.



"Lasers are increasingly embedded in novel systems where traditional technologies have not been able to keep up with the pace of miniaturization," said Gary Wagner, General Manager (U.S.), Ophir Photonics. "In semiconductor device fabrication, the physical limits of transistor scaling are challenging the exponential improvements predicted by Moore's Law. Fiber, CO2, and solid state lasers are now used to drill, cut, and ablate ever thinner chip layers. At the other end of the spectrum, long wavelength terahertz lasers are being applied to chemical analysis, medical imaging, and wireless communications."



The Pyrocam IIIHR allows users to see the beam for dynamic alignment and proper operation. For high-speed applications, it includes an interface to GigE (Gigabit Ethernet) cameras. A 16-bit A/D converter provides reliable measurement and analysis of both large signals and low level signals in the wings of the laser beam. A signal to noise ratio of 1000:1 means beams of 30 mW/cm2 are easily visible.



The Pyrocam IIIHR ships with BeamGage®, the company's advanced laser beam analysis software. BeamGage includes more than 55 measurements and calculations, many based on ISO standards. These include fast, off-axis correction of distorted beam images; trend charting; data logging; power/energy calibration; and pass/fail production testing. Laser manufacturers and OEMs can easily import their own custom algorithms created in C#/.NET using Custom Computations. BeamGage is based on the patented UltraCal baseline correction algorithm that helped establish the ISO 11146-3 standard for beam measurement accuracy.



Availability & Pricing

The Pyrocam IIIHR pyroelectric laser beam profiling camera is available now. OEM prices available on request.



Pyrocam Data Sheet: http://ow.ly/ISvWX



About Ophir Photonics

With over 35 years of experience, Ophir Photonics, a Newport Corporation company, provides a complete line of instrumentation including power and energy meters, beam profilers, spectrum analyzers, and goniometric radiometers. Dedicated to continuous innovation in laser measurement, the company holds a number of patents, including the R&D 100 award-winning BeamTrack power/position/size meters; BeamWatch®, the industry's first non-contact, focus spot size and position monitor for lasers in material processing; and Spiricon's Ultracal, the baseline correction algorithm that helped establish the ISO 11146-3 standard for beam measurement accuracy. The Photon family of products includes NanoScan scanning-slit technology, which is capable of measuring beam size and position to sub-micron resolution. The company is ISO/IEC 17025:2005 accredited for calibration of laser measurement instruments. Their modular, customizable solutions serve manufacturing, medical, military, and research industries throughout the world. For more information, visit http://www.ophiropt.com/photonics



Sales Inquiries: sales@us.ophiropt.com



For more information, contact:

Gary Wagner, General Manager

Ophir Photonics (U.S.)

3050 North 300 West

North Logan, UT 84341

Tel: 435-753-3729

E-mail: gary.wagner@us.ophiropt.com

Web: http://www.ophiropt.com/photonics



PR Office:

Shari Worthington

Telesian Technology Inc.

49 Midgley Lane

Worcester, MA 01604

Tel: 508-755-5242

E-mail: sharilee@telesian.com



© 2015. BeamGage and BeamWatch are registered trademarks and Pyrocam,

BeamMic, BeamTrack, NanoScan, and Ultracal are trademarks of Ophir-Spiricon.

All other trademarks are the registered property of their respective owners.

More from Health, Medical, & Dental Supplies and Equipment

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers