ProTek Devices Launches TVS Diode Modules for Auto, Wireless, Ethernet and Industrial Systems
New SM3KWxxA(TM) and SM5KWxxA(TM) Series of Modules Feature Low Profile Package Also Making Them Suitable for PC Boards and Many Other Applications
TEMPE, Ariz. - ProTek Devices(TM) today announced the general availability of two new surface mount transient voltage suppressor (TVS) diode modules ideal for automotive, wireless base stations, Ethernet, industrial and other applications. The SM3KWxxA(TM) and the SM5KWxxA(TM) series of modules are surface mount technology (SMT) TVS diodes in a low profile two lead DFN package. The modules are high-powered components designed to protect equipment and systems from the damaging effects of high voltage spikes.
The SM3KWxxA features a DFN package size of 6.5x5.5x1.2mm and the SM5KWxxA series of modules feature a DFN package size of 7.7x6.6x1.2mm. These packages make ProTek Devices' latest TVS modules also ideal for densely populated PC boards where smaller modules are required offering the same protection as through-hole components.
Technical Details for the SM3KWxxA
The 24 Volt SM3KWxxA's DFN-2-3KW, in a plastic case package configuration, provides a lower profile at a reduced cost. It provides 3,000 Watts of peak pulse power dissipation for a 10/1000 microsecond waveform. This is sufficient protection for tertiary type lightning threats at key interface locations. The device meets the requirements of IEC 61000-4-5 (Surge), 48A Level 3(Line-Ground), Level 4(Line-Line) and Level 1(Power). Other features include unidirectional configuration and easy mounting to printed circuit boards (PCB). The SM3KWxxA is fully RoHS and REACH compliant. Ideal applications include: relay drives; motor (start/stop) back EMF protection; module lightning protection and secondary lightning protection.
Other key mechanical characteristics include an approximate weight of 2.5 grams and lead-free silver plating. It has a solder reflow temperature of 260-270 degrees C; 12mm tape and reel per EIA Standard 481; and a flammability rating of UL 94V-0. The SM3KWxxA should be placed near a connector to provide the best protection against transients.
Technical Details for the SM5KWxxA Series
The SM5KWxxA series features three modules with varying voltage. The SM5KW10A is 10 Volts; the SM5KW33A is 33 Volts; and the SM5KW36A is 36 Volts. The devices are rated at 5,000 Watts peak pulse power using the 10/1000 microsecond surge waveform and 28,000 Watts for the 8/20 microsecond surge. This is sufficient protection for tertiary type lightning threats at key interface locations. These devices meet the requirements of IEC 61000-4-5 (Surge), 48A Level 3(Line-Ground), Level 4(Line-Line) and Level 1(Power). Other features include unidirectional configuration and easy mounting to PCBs. The SM5KWxxA series is fully RoHS and REACH compliant. Ideal applications for the SM5KWxxA series include: relay drives; motor (start/stop) back EMF protection; module lightning protection; and secondary lightning protection.
Other key mechanical characteristics of the SM5KWxxA series include an approximate weight of 2.5 grams and lead-free silver plating. It features a solder reflow temperature of 260-270 degrees C and flammability rating of UL 94V-0. The SM5KWxxA should be placed near a connector to provide the best protection against transients.
"Electronic systems across all applications have several circuits and interfaces that are vulnerable to the effects of ESD, EFT and other induced surges," said VP Pai, Group Vice President of ProTek Devices. "Automotive systems, wireless base stations and countless industrial applications, to name just a few, are highly susceptible to surges. They must be protected against damaging effects of high voltage spikes. ProTek Devices' new SM3KWxxA and the SM5KWxxA series of TVS modules provide a low footprint and low cost ideal for such applications to protect against voltage surges."
Pricing and Availability
The SM3KWxxA and SM5KWxxA series of modules are now available in mass quantities. Other voltage options may be made available based on popular demand. Sample quantities are available upon request. SPICE model and parameters are available for circuit simulation upon request. Pricing for the SM3KWxxA and SM5KWxxA start at under $1.00 in quantities of 10,000 or more. Data sheets for each module are available for download at www.protekdevices.com/Products/compMod.php.
About ProTek Devices
In business more than 25 years, ProTek Devices(TM) is a privately-held company that offers a product line of transient voltage suppressor (TVS); avalanche breakdown diode; steering diode TVS array and other surge suppressor component products. These TVS modules protect electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexer LEDs; audio control ICs; RF and related high frequency products. These analog devices work in a host of consumer; industrial; automotive and other applications. The company maintains its headquarters in Tempe, AZ. More information is available at www.protekdevices.com.
COMPANY CONTACT:
VP Pai
ProTek Devices
1.602. 431.8101
vppai@protekdevices.com
www.protekdevices.com
MEDIA CONTACT:
Rafael Larin
Emissary Communications
1.818.541.9595
rafael@emissarypr.com
www.emissarypr.com
SOURCE ProTek Devices
Web Site: www.protekdevices.com
