Press Release Summary:
14-Roller Precision Size Graders are offered in widths of 2, 3, 4 or 5 ft. Unit is designed for grading snipped and unsnipped whole and cut green beans for fresh pack, frozen and canned product applications. Grader offers capacity of less than 4,000 with up to 13,000 lb per hr. Unit’s gap between the rollers can be easily adjusted by rotating single handle provided and can be equipped with optional variable frequency drive.
Original Press Release:
Key Technology Introduces New Precision Size Grader for Green Beans
Key Technology expands their family of rotary sizing and grading systems for green beans, which includes their popular Sliver Sizer Remover (SSR), Precision Size Grader (PSG) and Rotary Size Grader (RSG). With the introduction of a new 14-roller PSG, Key enables processors to replace drum graders with minimal impact to surrounding equipment. The 14-roller PSG provides four rollers more than previous systems to improve grading performance. The PSG separates beans by diameter, maintaining accuracy over time to help processors make grade while maximizing yield.
Ideal for grading snipped and unsnipped whole and cut green beans for fresh pack, frozen and canned product applications, Key’s rotary sizing and grading systems are available in widths of 2, 3, 4 or 5 feet (0.6 to 1.5 meters). All are 100 percent metric, with metric fasteners, bearings, shafts and sprockets. Achieving capacities of less than 4,000 and up to 13,000 lb. per hour (1.8 to 5.9 metric tons), processors rely on Key’s rotary sizing and grading systems at multiple points along their production lines.
For frozen and canned green beans, SSRs are often found outside the factory at receiving where they grade a digital sorter’s reject stream to reclaim good product from field debris. After snippers, RSGs remove stems and small pieces prior to digital sorting to maximize the performance of the sorter by reducing its load. The main grading area usually follows digital sorting where one or more PSGs are used to separate green beans into two or more grades by diameter.
For fresh pack green beans, a typical production line layout has a PSG feeding an RSG upstream of a digital sorter. Utilizing this sequence of mechanical separation systems and optical sorting helps customers achieve the highest possible product quality and production efficiencies.
“Our SSRs and RSGs have been used by frozen and canned green bean processors for many years. Now, these customers are increasingly using our Precision Size Graders too. The combination of PSGs and our other rotary sizing and grading systems are becoming the new industry standard,” said Jim Ruff, General Manager of the Integrated Solutions Group at Key Technology. “Fresh pack processors are also starting to adopt this technology.
Compared to drum graders, which are complicated machines with many moving parts, Key’s new 14-roller PSGs are simple and robust. PSGs offer a much smaller footprint than drum graders with the same throughput, while achieving gentle handling and reducing maintenance. They hold the grade over time, which improves final product quality and increases yield. With an open design, fully welded frame and one-piece block pan, they enhance sanitation.
When replacing a drum roller on an existing line and matching the footprint is desirable, the new 14-roller system is ideal.
The PSG separates green beans by diameter. Featuring a series of rollers with gaps in between, thin and curled beans fall through as thicker beans are conveyed across the top. The rollers spin at progressive speeds, e.g., the second spins faster than the first to spread product and optional deflectors turn beans, ensuring every bean has the chance to fall through. Rollers are faceted and textured to create gentle agitation so product is lively across the top to either find a gap or roll along.
Processors around the world rely on the versatile PSG to achieve their grade, regardless of regional differences. For example, a U.S. processor that considers thicker beans to be of premium quality configures their line so product that is conveyed across the top of a PSG is further processed. A European processor that regards thinner beans to be premium takes the product that falls through the PSG and conveys that to the next step in the processing line.
The gaps between the rollers of the PSG are easily adjusted to change the diameter threshold to modify the grade or process different green bean varietals or other products such as potatoes or carrots. Simply rotating the single handle quickly and accurately adjusts all the gaps consistently throughout the machine to grade by a new size cross section. The PSG can be adjusted and cleaned to handle a new grade or product in less than 10 minutes. Key can equip the PSG and RSG with an optional variable frequency drive to enable adjustments in motor speed to handle changes in throughput, product condition or the aggressiveness of the grade.
For more information on Key’s rotary sizing and grading systems, visit: www.key.net/products/rotary-sizing-and-grading-systems
About Key Technology, Inc.
Key Technology (NASDAQ: KTEC) is a global leader in the design and manufacture of automation systems including digital sorters, conveyors and other processing equipment. Applying processing knowledge and application expertise, Key helps customers in the food processing and other industries improve quality, increase yield, and reduce cost. An ISO-9001 certified company, Key manufactures its products at its headquarters in Walla Walla, Washington, USA; Beusichem, the Netherlands; Hasselt, Belgium; and Redmond, Oregon, USA. Key offers customer demonstration and testing services at five locations including Walla Walla, Beusichem, and Hasselt as well as Sacramento, California, USA and Melbourne, Australia; and maintains a sales and service office in Santiago de Queretaro, Mexico.