PIV Calibration Standards are supplied individually or in bundles.

Press Release Summary:



In full compliance to MITRE Technical Report MTR060170R5, PIV (Personal Identity Verification) Calibration Standard series includes 7 individual standards: M13-60-1x-RM 0.1875–12 c/mm Sinusoidal Array with 14 density patches; M13-60-S-RM 1.0–10.0 c/mm Sinusoidal Array with 12 density patches; PIV-CBT1 Compact Bar Target; PIV-SE1 5.2° Slant Edge Target; PIV-RR1 1 c/mm Ronchi Ruling Grating; PIV-ST1 Dark Gray Uniformity Target; PIV-ST2 Light Gray Uniformity Target.



Original Press Release:



Announcing the New Applied Image Personal Identity Verification Calibration Standards



Rochester NY – With heightened security requirements for electronic personal identification and in response to the Homeland Security Presidential Directive-12, the NIST Federal Information Processing Standards-201/201-2 and FBI development of the PIV Image Quality Specification for Single Finger Capture Devices, APPLIED IMAGE is introducing the PIV (Personal Identity Verification) Calibration standards. These standards are in full compliance to the MITRE Technical Report MTR060170R5 “Test Procedures For Verifying Image Quality Requirements for Personal Identity Verification (PIV) Single Finger Capture Devices".



The APPLIED IMAGE PlV Calibration Standard family consist of seven individual standards:

- M13-60-1x-RM 0.1875 - 12 c/mm Sinusoidal Array with 14 density patches

- M13-60-S-RM 1.0 - 10.0 c/mm Sinusoidal Array with 12 density patches

- PIV-CBT1 Compact Bar Target

- PIV-SE1 5.2° Slant Edge Target

- PIV-RR1 1 c/mm Ronchi Ruling Grating

- PIV-ST1 Dark Gray Uniformity Target

- PIV-ST2 Light Gray Uniformity Target



In addition to the individual PIV standards, APPLIED IMAGE has bundled them together in two Personal Identity Verification Kits:

- PIV-KIT1 consists of the SINE M13-60-1x-RM, PIV-CBT1, PIV-SE1, PIV-RR1, PIV-ST1 and PIV-ST2 Calibration Standards

- PIV-KIT2 consists of SINE M13-60-S-RM, PIV-CBT1, PIV-SE1, PIV-RR1, PIV-ST1 and PIV-ST2 Calibration Standards



In order for a single finger-capturing device to be included on the FIPS-201/201-2 Approved List for purchase by Federal agencies, all devices must comply with the PIV technical document specifications (and complete other specification steps).



APPLIED IMAGE continues to offer the original SINE M13-60-FBI Kit for palm/hand/multifingerprint capturing devices. The kit includes the M13-60-1x-RM Sinusoidal Array and the RR1-N-RM four-inch square 1c/mm Ronchi Ruling grating.



To view these and other APPLIED IMAGE products, click on the links below:

- Personal Identity Verification Individual Test Charts

- Personal Identity Verification Kits

- SINE M-13-60-FBI Kit

- the new APPLIED IMAGE website



About Applied Image, Inc.

Established in 1978, APPLIED IMAGE Inc. started as a manufacturer of high quality Precision IMAGED components, calibration standards, linear scales and test targets. Since then, APPLIED has expanded their manufacturing capabilities to include image analysis standards, sinusoidal array patterns, UPC-EAN barcode calibration standards, ISO, IEEE, AIM, ANSI, ISEA and other society image quality standards. The culminating selection of targets has become the basis for the APPLIED IMAGE “off-the-shelf” product lines, which can be found and purchased on the APPLIED IMAGE website www.appliedimag.com. APPLIED is also renowned for their custom manufacturing and innovation capabilities, which includes Custom Ball (spherical) Optical Lenses, PhotoMask and Component Sub-Assembly Services. With their knowledgeable engineering and manufacturing staff, they have provided imaged components for a wide variety of industries and applications around the world. From microrobotic components to calibration standards for the Mars Rover and the International Space Station, APPLIED does it all, truly making APPLIED IMAGE “Where IMAGE Concepts Become Reality”.



For more information, please contact:

Jason Mombert

Sales Engineer Associate

phone: 1.585.482.0300 ext. 216

fax: 1.585.288.5889

e-mail: Jmombert@appliedimage.com

More from Test & Measurement

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers