Press Release Summary:
MAD EasyLoad Hoist is positioned inside the vehicle at ceiling height and is away from the elements stowed inside the cargo. It extends 3.79 feet and glides up to 8 feet laterally. EasyLoad can hoist up to 1,100 pounds. Moving on two axes, it extends up to 45.5 inches in length. Cargo can navigate through manholes. Lifting at up to 2 inches per second, EasyLoad can be operated single-handedly. Silent operation allows for verbal communication between operators. MAD EasyLoad Hoist can be installed in under 4 hours.
Original Press Release:
EasyLoad Hoist from National Fleet Products Features Double-Axis Positioning, a 45.5-Inch Boom and Lifts Up to 1,100 Pounds
National Fleet Products’ EasyLoad Hoist stores inside vehicles at ceiling height, extending 3.79 feet and gliding up to 8 feet laterally, to put up to1,100 pounds of lifting and lowering capacity precisely where it’s needed.
National Fleet Products, a leading North American supplier of cargo lifting equipment, loading ramps and other aftermarket accessories for commercial vehicles, announced the unveiling of its new MAD EasyLoad Hoist. The quiet, powerful, easy-to-install 12-volt electric hoist is now in stock, and will be on display in booth 409 at the 2018 NTEA Work Truck Show in Indianapolis, Ind.
The MAD EasyLoad Hoist is the intelligent alternative to post-mounted cranes. The EasyLoad remains inside the vehicle, away from the elements, and can be stowed above shelving on either side of the vehicle or in the center of the cargo hold until needed. Its boom is easily positioned for the task at hand because it can move on two axes, sliding laterally up to 8 feet, depending on the vehicle, and extending up to 45.5 inches in length.
“The dual-axis MAD EasyLoad Hoist makes it easy for operators to lift and lower cargo with pinpoint accuracy because they don’t have to worry about positioning the vehicle in exact relationship to a target,” Steven Peterson, president of National Fleet Products, said. “The EasyLoad allows operators to navigate cargo through manholes and to position the winch for optimal load securement, even when the host vehicle isn’t perfectly oriented.”
A robust 12-volt, 100-amp electric motor drives the boom and winch action, lifting maximum loads at up to 2 inches per second, at lengths of up to 65 feet. Handheld controls are easy to understand and operate even with one hand, and an 8-foot cable enables operators to position themselves safely in relationship to cargo as the EasyLoad moves. Unlike most winches, the EasyLoad operates quietly, allowing verbal communication to continue even during its operation.
The MAD EasyLoad Hoist is simple to install, and only takes about four hours to do so. A low-profile tubular steel structure is easily configured to fit virtually any commercial van, service vehicle or box truck. The design transfers the load to the floor, and the four-legged configuration maintains structural integrity by attaching to the rear doorframe and interior structural members with just four brackets. Cast iron mounting feet secure the framework to the deck. The system is easy to wire, and a simple door switch prevents the hoist from operating when the vehicle is closed.
“The MAD EasyLoad Hoist is a smart new solution to an old problem,” Peterson said. “It’s truly a game changer in comparison to post-mounted cranes and other traditional lifting technology.”
Unlike post-mounted cranes that can lose lifting capacity when fully extended, the MAD EasyLoad Hoist provides full-length boom travel with no loss of capacity. With its 45.5-inch boom extension combined with a 1,100-pound lifting capability, it also outperforms the majority of vehicle-based post-mounted cranes.
The EasyLoad not only offers better lifting characteristics, but it has superior loading capabilities as well. Unlike swiveling cranes that do well to simply position a load at the threshold of a cargo hold, the EasyLoad can take the load well into the cargo space, forward of the vehicle’s rear axle, depositing it with its unique dual-axis precision.
The 1,100-pound capacity, heavy-duty EasyLoad Hoist weighs 330 pounds, minus its steel framework, which varies according to the vehicle it serves. Its boom is 90 inches in length when fully retracted, and its winch uses a three-sixteenth-inch steel cable. The light-duty EasyLoad Hoist can lift up to 550 pounds and weighs only 220 pounds, minus its steel framework. Its boom is just 75 inches in length when fully retracted, and it uses a .19-inch steel cable. Both systems are easy to maintain, requiring just one annual service interval and periodic cable inspections.
Parties interested in scheduling a demonstration of the MAD EasyLoad Hoist may contact National Fleet Products directly by calling (763) 762-3451 or by sending an email to firstname.lastname@example.org. The EasyLoad Hoist is in stock now and available in the United States and Canada through the company’s extensive distribution network of convenient distribution locations. Please contact National Fleet Products to locate a distributor near you.
To access high-resolution product images of the MAD EasyLoad Hoist, please visit https://www.nationalfleetproducts.com/hoist-media-page.
To view a video of the MAD EasyLoad Hoist, please visit https://www.youtube.com/watch?v=1BTKOmAqLI0.
About National Fleet Products
National Fleet Products is a leading North American supplier of aftermarket accessories for commercial vehicles, including loading ramps, vehicle-mounted hoist systems, ladder racks, truck and trailer fenders, exterior vehicle security locks and suspension assist spring kits. The family-owned company serves as a North American master distributor for renowned European product lines such as Jonesco Plastics, WM System, MAD Tooling and Serrature Meroni. The company serves the United States and Canada through its extensive distribution network. Learn more at https://www.nationalfleetproducts.com.