Multi-Protocol PHY enables Compact Optical Access platforms.

Press Release Summary:



Offering single-chip scalability, PM5426 HyPHY 10G addresses multi-service transponder and muxponder applications. Transponder Mode maps 10G client to OTU2, OC-192/STM-64 network or system interfaces, while Muxponder Mode maps SFP clients to OTU2 or OC-192/STM-64 network or system interfaces. Device provides framing, mapping, and multiplexing resources for variety of protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON, and multi-rate bit transparent services such as video.



Original Press Release:



PM5426 HyPHY 10G Optical Access Multi-Rate / Multi-Protocol PHY



Product Overview

The PM5426 HyPHY 10G device is a feature-rich, system-on-a-chip solution optimized to enable a new generation of Compact Optical Access platforms for the network edge. HyPHY 10G addresses multi-service transponder and muxponder applications for Multi- Service Provisioning Platform (MSPPs), Wavelength Division Multiplexing (WDM) Platforms, Reconfigurable Optical Add-Drop Multiplexers (ROADMs), Optical Transport Platforms (OTPs), Packet- OTPs, and Optical Access Platforms.

The HyPHY 10G delivers single-chip scalability and feature integration to enable optimal footprint, power, and cost efficiency. The HyPHY 10G provides a rich set of framing, mapping and multiplexing resources for a variety of protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON, and multi-rate bit transparent services such as video.

The HyPHY 10G supports an array of innovative technologies:

  • Rate-Agile Programmable Transceiver IO (RAPTR IO): Gapless rate-agile SERDES from 16 Mbits to 4.25 Gbit/s for direct connect to SFPs and from 8.5 Gbit/s to 11.32 Gbit/s for direct connect to SFP+ and XFP modules

  • OTN Phase Signaling Algorithm (OPSA): Improve jitter performance when transporting clients over OTN

  • Efficient sub-ODU1 mapping of client data into OTN

  • Packetized OTN interface to carry ODUks across system fabrics

    Benefits

  • Carrier OPEX and CAPEX savings:

    - Cost effectively delivers Ethernet, SAN and SONET/SDH services to customer premisest

  • Unprecedented service delivery flexibility:

    - Supports per-port configurable OTN, SONET/SDH, Ethernet, SAN and bit transparent client services

    - Rich suite of client service mappings into OTN and SONET/SDH

  • Processor-based Carrier Ethernet:

    - Flexible implementations of Synchronous Ethernet, IEEE 1588 Precision Timing Protocol (PTP), and Ethernet Link OAM

  • Optimized power and footprint for compact chassis designs:

    - Direct connect to SFP, SFP+ and XFP modules for all rates with no external SERDES or PLL components required

    - All frequencies derived from a single 155.52 MHz reference clock

    - Single-chip solution for muxponders, transponders and optical access platforms

    - Glueless interconnect to many off-the-shelf NPs and fabrics

    The HyPHY 10G supports two operational modes:

  • Transponder Mode: Maps a 10G client to OTU2, OC-192/STM-64 network or system interfaces

  • Muxponder Mode: Maps SFP clients to OTU2 or OC-192/STM-64 network or system interfaces

    Product Highlights

    10G Network Interface

  • 1x multi-rate SERDES for direct connection to XFP/SFP+ modules, independently tunable from 8.5 Gbit/s to 11.32 Gbit/s or 1x SFI 4.1 interface for chip-to-chip interconnect or for direct connection to MSA modules

  • Support for one of the following services:

    - OTN

    - SONET/SDH

    10G Client Interface (Transponder Mode)

  • 1x multi-rate SERDES for direct connection to XFP/SFP+ modules, independently tunable from 8.5 Gbit/s to 11.32 Gbit/s or 1x SFI 4.1 interface for chip-to-chip interconnect or for direct connection to MSA modules

  • Support for one of the following services:

    - OTN

    - SONET/SDH

    - Ethernet

    - Fibre Channel

    SFP Client Interfaces (Muxponder Mode)

  • 8x multi-rate SERDES for direct connection to SFP optical transceivers, independently tunable from 16 Mbit/s to 4.25 Gbit/s

  • Any-Service Any-Port configurability:

    - OTN

    - SONET/SDH

    - Ethernet

    - Fibre Channel

    - Video

    - Bit Transparent Services

    SONET/SDH Subsystem

  • Integration of field-proven CHESS SONET/SDH IP, reducing development cycles through reuse of CHESS software base

  • SONET/SDH framing, high-order pointer processing and overhead processing

  • Tandem Connection Monitoring

  • Transport overhead transparency

  • BLSR and MSSPRing protection switching with alarm processing, K-byte express, automatic payload configuration and other protection features

  • Non-blocking STS-1/AU-3 cross-connect

    Fibre Channel

  • FICON, ESCON, and Fibre Channel support

    Ethernet

  • Integrated IEEE 802.3 compliant media access controllers (MAC)

  • Lossless IEEE 802.3 local flow-control with integrated packet buffers

  • Comprehensive per-port Ethernet statistics

  • Frame sizes of 64 bytes to 9.6 Kbytes

  • Transmit and receive of IEEE 802.3ah Link OAM, LACP and Management VLAN messages

  • G.8261 Synchronous Ethernet and IEEE 1588v2 PTP Ethernet timing

  • On-chip central packet buffer

    OTN

  • Complies with ITU-T G.709, ITU-T G.798 and ITU-T G.975

  • Flexible OTU, ODU and OPU overhead/data processing and frame alignment

  • ODTUjk multiplexing and de-multiplexing

  • Up to six levels of Tandem Connection Monitoring (TCM)

  • Independent performance counters for the accumulation of BIP-8, BEI and other error conditions with optional interrupts

  • O-E-O regeneration with adaptive clocking using PMC-Sierra's OTN Phase Signaling Algorithm (OPSA)

    Client Mapping into OTN and SONET/SDH

  • Maps a wide variety of protocols over OTN and SONET/SDH

  • Encapsulates packet streams into ITU-T G.7041 GFP-F and GFP-T, HDLC, LAPS and PPP
  • OTN client mapping:

    - Synchronous and asynchronous CBR mapping per G.709

    - High-order (ODU1) virtual and contiguous concatenation performed according to G.709 with LCAS support

    - Efficient mapping/multiplexing of sub-OD1 client data into OTN

    - OPSA for rate encoding and adaptation of transparent client data streams over OTN

    - 10GE mapping into OTN compliant with ITU-T standards

  • SONET/SDH client mapping:

    - High-order (STS-1-Xv/VC-3-xv & STS-3c-Xv/VC-4-Xv) virtual and contiguous concatenation performed according to ITU-T G.707 and ANSI T1.105

    - Hitless Link Capacity Adjustment Scheme (LCAS) according to ITU-T G.7042

    - Up to 128 ms of differential delay between VCG members

    Serial System Expansion Interfaces

  • SONET/SDH:

    - ESSI serial links supporting slicing and de-slicing for byte, nibble, dibit, and bit modes

    - Compatible with PMC CHESS solutions

  • OTN:

    - Standards-based packetized OTN interface

    - Enables grooming of ODUk using an off-the-shelf packet Fabric

  • Packet traffic:

    - Interlaken v1.1 interface

    - XAUI interfaces

    Applications

  • Optical access platforms for data centers and mobile backhaul

  • Transponder and muxponder cards for ROADMs

  • MSPP-on-a-wavelength cards

  • Multi-Service aggregation cards for switches and routers
  • All Topics