Laser Marking Kit offers everything needed for DPM.
Press Release Summary:
Offered as integrated package, i-Series Fiber Laser Marking Kit consists of air-cooled, ytterbium q-switched fiber laser; single or dual scan head controllers; and power supply. Stand-alone system can be integrated into any production line or full turnkey workstations and is suited for alphanumeric and graphic Direct Parts Marking (DPM), Unique IDentifier (UID), and deep engraving applications. Kit also offers remote troubleshooting capabilities.
Original Press Release:
New Integrated Fiber Laser Marking Kit
Laser Photonics, a division of Fonon Technology International, Inc (www.laserphotonics.com) the world-renowned inventor and manufacturer of equipment based on Zero Width Laser Cutting Technology(TM) (ZWLCT(TM)) released the new Integrated Fiber Laser Marking Kit for Direct Parts Marking, UID, and Deep Engraving.
The i-Series Fiber Laser is an integrated package consisting of laser and scan head controllers, power supply and laser in just one component. (i-Series FLMK) Traditional laser kits require a set of cables and interconnects for installation but with the iSeries FLMK, not only has the number of cables been reduced, but installation and integration has been made easier.
For quick start-ups or changeovers from existing systems, the plug-and-play software offers users the ultimate in control, quality and speed versus competitive marking technologies. As an option, an external PC is connected via USB to the laser unit, but can be disconnected once all information is programmed into this new technology. The result is a cutting-edge system that can be integrated into any production line at a cost reduction of nearly 25% over traditional fiber laser systems.
Considering the cost reductions of no consumables and very low power consumption, the i-Series Fiber Laser Marking Kit is now the most cost effective, eco-friendly and flexible method of Direct Parts Marking, UID, and Deep Engraving in the Aerospace, Automotive, Medical, Defense and other markets.
Recently, the Department of Defense (DoD) implemented a standard known as the UID or Unique IDentifier. The mark is a unique part identification unit to help track products from production through sales and operations, even back to maintenance. A permanent identifier is required for any item the DoD receives that costs over $5,000.00, is serial managed, is a consumable or is mission essential and part of a controlled inventory.
The i-Series FLMK is a safe, compact, service-free laser kit designed to meet individual marking needs with the ability to mark a wide variety of materials using many different techniques including Direct Parts Marking (DPM) of alphanumeric, logos, serial numbers, part numbers, lot and date codes, schematics, graphics, deep engraving and more. It can be delivered as a stand-alone system that can be integrated into any production line or with full turnkey workstations.
The picture represents a stand-alone Integrated Fiber Laser System for Direct Parts Marking, UID, and Deep Engraving in dual head configuration with single PC based controller. It is the most advanced, reliable, industrial grade, cost effective, and maintenance-free fiber laser marking system available on the market today.
Main Features
. Easy integration into assembly line or conveyer line without PC connection which eliminates computer downtime
· Plug and Play operation with remote troubleshooting
· State-of-the-art, Air-Cooled, Ytterbium Q-Switched Fiber Laser for marking on virtually any material (metals, plastics, ceramics; etc.)
· Minimal number of external connection cables makes it the easiest OEM package to integrate into customer equipment or conveyer line.
· Single or Dual Head Configuration working as a Master/Slave or totally independently
· Optional Dual Head master-slave configuration which doubles the speed of the marking process. This could be very useful for marking a large quantity of parts with the same pattern.
· Integrated Design with laser, laser control and power supplies in one box for each of the two scan heads
· Optional Integrated high speed DSP and on board computer with 32 Mb media flash memory card to store marking and lasing files.
· Ability to work without computer connected to the laser system (Optional Configuration).
· Designed for maintenance-free Direct Part Marking (DPM) applications
· PC with user-friendly software supplied
· Excellent bean quality (M2=1.4)-TEM00 beam profile
· Greater than 50,000 hours maintenance-free operation
· Low voltage power source (110/220 VAC) requirements.
· Built-in I/O for integration into a production line or other equipment.
... for more info go to http://www.laserphotonics.com/
...email us at info@laserphotonics.com
Technology
Laser Photonics is a division of Fonon Technology - the world-renowned inventor and Manufacturer of equipment baser on Zero Width Laser Cutting Technology(TM) (ZWCT(TM)) for semiconductor and Flat Panel Display Industry.
Laser Photonics designs and manufactures world class CO2 and Fiber Laser equipment for automotive, aerospace, medical, electronics, and defense markets.
Applications are covering laser cutting, scribing, dicing, singulation, UID marking, and engraving.
LPC holds several worldwide licenses for innovative and 'unique to the industry' laser products and technologies.
The product line introduced by Laser Photonics demonstrates significant advancements in fiber laser applications, wafer and glass panel processing, laser based deep engraving applications over existing technologies. These advancements translate into numerous cost and performance benefits to the end users of LPC equipment.
LPC products are less expensive, higher in quality, simpler in operation, and more efficient then other comparable products on the market, making them attainable to millions of small and mid-sized companies, who were not previously able to acquire laser equipment because of high cost and complicated operation.
The Company
Laser Photonics is a division of Fonon Technology International, the world-renowned inventor of Zero Width Laser Cutting Technology ® (ZWLCT®), active for 15 years as a global R&D company, has now entered the FPD equipment market. To accomplish this task, Fonon Technology has acquired a number of equipment and laser manufacturing divisions, enabling the company to supply Hi Tech Laser equipment to the Industry. Fonon has also recently acquired Laser Photonics L.L.C in Orlando Florida, and opened a new laser manufacturing facility. (www.laserphotonics.com). The President of Fonon Technologies (Dmitri Nikitin) announced "We are currently filling orders from premiere companies in China and Korea". Fonon Technologies will manufacture World-Class equipment for Flat Panel Display and Semiconductor Industries incorporating the new generations of fiber lasers and ZWLCT®. A primary focus will include semiconductor wafer dicing by supplying systems utilizing the Zero Width Laser Cutting Technology(TM) (ZWLCT®) in conjunction with fiber lasers. "Our R&D stage has been validated and Fonon believes that it possesses the best and the most effective technology for direct parts marking, display glass and wafer dicing available on the market today" said Nikitin.
"With the new Traceability Law and introduction of a UID standards, new UID and direct parts marking requirements, with the necessity of inventory of more then 97 millions of items in the military segment the business opportunity for the fiber laser marking systems and equipment exceeds a billion dollars a year," said company CEO Dmitri Nikitin.
Fonon Technology International Inc.® and Laser Photonics® products and product names are either trademarks or registered trademarks of Fonon Technology International Inc.® All other trademarks or registered trademarks are the property of their respective intellectual property owners.
