Industrial ATX Power Supply serves PC/104, EPIC, and EBX SBCs.
Press Release Summary:
Measuring 198 x 97 x 40.5 mm, convection-cooled, 150 W model PS-ATX150-0 powers embedded SBCs that support ACPI specification for device configuration and power management by OS. Support for ATX signals Power On/Off, Power Good, and Power Fail lets SBCs utilize sleep/suspend modes for energy conservation during periods of processor or system inactivity. While it accepts 90–264 Vac, 47–63 Hz input, power supply generates 5 DC output voltages: +3.3 V, +5 V, +5 V Standby, +12 V, and -12 V.
Original Press Release:
150W Industrial ATX Power Supply for PC/104, EPIC, and EBX Single Board Computers
Arlington, TX – Today WinSystems introduced the PS-ATX150-0, a 150W industrial power supply for ATX-compatible embedded Single Board Computers (SBCs). It supports ATX signals Power On/Off, Power Good, and Power Fail, allowing ATX-compatible SBCs to utilize sleep and suspend modes for energy savings during periods of processor or system inactivity. The PS-ATX150-0 is designed to power embedded SBCs that support the Advanced Configuration and Power Interface (ACPI) specification for device configuration and power management by the operating system. Examples include WinSystems’ Intel® Atom™-based SBCs in the PC/104, EPIC, and EBX form factors as well as from other manufacturers.
Its global design accepts 90 to 264VAC (47 – 63 Hz) input and generates five different DC output voltages: +3.3V, +5V, +5VStandby, +12V, and -12V. The PS-ATX150-0 has an active power factor correction circuit that meets EN61000-3-2 and EN61000-3-3 Class D standards for better energy efficiency. The design has tight controls and self-protection features to offer reliable power in harsh industrial conditions including 1% line regulation, ±2% - 5% load regulation, short circuit protection, over temperature protection with autostart, and over voltage protection. The +5V output requires a minimum 1 amp load while all the other outputs require no minimum load.
The PS-ATX150-0 measures 198 x 97 x 40.5mm with a thermally efficient chassis design to allow the product to operate over a temperature range from -10° to +70°C. The unit needs only normal convection cooling and does not require a fan. Its MTBF is greater than 130,000 hours @ 50°C which calculates to over 14 years.
The power supply meets various safety and EMC standards. It is UL60950-1, IEC 60950-1, and TUV EN60950-1:2001 approved. For EMI, conduction, and radiation, it is compliant to EN55022 (CISPR22) Class B and FCC Part 15. It also is compliant with EN61000-4-2, -3, -4, -5, -6, -8, and -11 for electrostatic discharge, immunity to radio frequencies, fast transients, line surge, conducted disturbances, magnetic fields, dips, and short interruptions.
PRICING AND AVAILABILITY
The PS-ATX150-0 is priced at $199 (qty. = 1). Delivery is from stock. It also is available as the PS-ATX150-ATX which includes an AC power cord and DC cable harness. For sales information, please list; WinSystems’ Application Engineering Group at 715 Stadium Drive, Arlington, Texas 76011, Ph: (817) 274-7553, Website www.winsystems.com and our e-mail is: info@winsystems.com.
For more detailed information on the web, go to:
•Â PS-ATX150-0 Product Page www.winsystems.com/products/misc/PS-ATX150.cfm
• PS-ATX150-0 Data sheet www.winsystems.com/datasheets/PS-ATX150-DS.pdf
• 300-dpi image is located at: www.winsystems.com/news/press/PS-ATX150image.jpg
ABOUT WINSYSTEMS
WinSystems, located in Arlington, Texas, designs and manufactures industry-standard PC/104, PC/104-Plus, EPIC, EBX, Pico-I/O, SUMIT-ISM, and STD Bus single board computers (SBCs), I/O modules, Panel PCs, and enclosures for use by OEMs and system integrators worldwide. We have served the industrial, transportation, pipeline, Mil/COTS, communications, remote, and medical markets for over 30 years. We are an employee-owned company.
WinSystems, Inc.
715 Stadium Drive
Arlington, Texas 76011 USA
Website: www.WinSystems.com
E-mail:Â Info@WinSystems.com
Telephone: (817) 274-7553
FAX:Â (817) 548-1358
