High-Power LED Light integrates PWM technology.

Press Release Summary:



Magnalight LEDP10W-240E can be configured to produce 20,640 lm of light with far-reaching (1,600 ft), 20° spread suited for vehicle or marine use or 40° spread (flood) for work and industrial applications. Waterproof to 3 m, LED light emitters incorporate PWM capabilities that allow control of brightness and flash/strobe function via external pulse controllers/dimmers. IP68-rated light bar, drawing 240 W @ 20 A when connected to 12 V system, adjusts to input voltages from 9-46 Vdc.



Original Press Release:



Magnalight.com by Larson Electronics Announces the Addition of Versatile High Power LED Light with Integrated PWM Technology



Larson Electronics' Magnalight LEDP10W-240E LED Light offers advanced LED technology producing 20,640 lumens of highly controllable light output. Waterproof and multi-voltage capable, these high power LED light emitters can be configured to produce light with a far reaching 20 degree spread ideal for vehicle or marine use or a 40 degree spread ideal for work and industrial applications. These lights offer added versatility and the ability to achieve precise light control by incorporating pulse width modulation which allows operators to control the brightness and flash or strobe function of these units with external pulse controllers or dimmers.

Producing 20,640 lumens of bright and far reaching light, the Magnalight LEDP10W-240E LED Light Bar is one of the largest in Magnalight's new LEDP10W series of LED light emitters and an ideal choice for operators seeking a powerful, efficient and highly controllable light source. Drawing only 240 watts at 20 amps when connected to a 12 volt electrical system, this LED light bar's 24 Cree Xlamp ® LEDs produce a light beam that exceeds 1,600 feet in length and reaches 200 feet in width when configured with a 20 degree beam spread for distance. An optional 40 degree beam spread produces a flood beam light pattern that distributes more light closer to the fixture and makes these units ideal for use as www.magnalight.com/c-280-magnetic-work-lights.aspx [work area lights. __title__ work area lights.] Waterproof to 3 meters and sealed against intrusion of dust and dirt, these IP68 rated light bars can also withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, making them extremely durable and suitable for use in environments that experience wide changes in temperature and humidity. These units incorporate advanced LED drivers that use Pulse Width Modulation (PWM) technology to provide an unparalleled ability to manage heat. The duty cycle of the electrical current reaching each LED in these units is automatically adjusted according to each LED's core temperature. This allows the LEDs to be driven at up 100% of their capacity without the overheating that can cause premature LED failure. As a result, these LEDs essentially regulate their own temperature while producing the maximum amount of light possible without any loss of LED longevity. The LEDP10W series of www.magnalight.com/c-317-visible-led-lights.aspx [extreme environment LED lights __title__ extreme environment LED lights] also offers added versatility through the addition of an external control wire which lets operators tap into the PWM drive controller with an external pulse generator or dimmer switch, allowing them to set the light to flash, dim or brighten however they desire. This ability to precisely control the operation of these lights makes them an attractive light source for operators in industrial and manufacturing settings where machine visioning systems are used and control of lighting operation is critical. These LED light emitters are also able to sense and adjust to a wide range of input voltages making them capable of operating on 9 to 46VDC without modifications or the need for transformers. A versatile mounting system allows these units to be mounted to either flat surfaces or round tubes while an extruded aluminum housing and polycarbonate lenses provide exceptional strength and durability. Finally, these led lights are designed to work with a wide variety of power supplies, including the Magnalight DCP series for operation for AC voltages ranging from 110 volts to 277 volts VAC.

"Operators from a wide variety of industrial applications, from aerospace to fabrication are saving money with our high intensity LED lights by replacing a variety of incandescent and fluorescent lighting within equipment and on the production floor," said Rob Bresnahan with Magnalight.com. "While LED lights present higher upfront costs, the total cost of ownership is lower when you calculate downtime or errors associated with changing lamps or repairing older lighting. The LEDP10W series is specifically designed for indoor applications, where there is limited air flow. While we continue to use the housing as a heat sink, we use the integrated PWM to make small changes in the output to control the temperature of the board and LED packages. Heat is what ultimately degrades the long LED life, so we build in electronic temperature safeguards that protect the circuitry from overheating. The combination of aluminum board substrates, high surface area housings and integrated thermal controls enable us to drive these LED lights hard, but safely, even within enclosed, high ambient temperature environments."

Larson Electronics' Magnalight.com carries an extensive inventory of LED light fixtures, LED light bars, LED spotlights and military grade LED lights. Magnalights' full line of lighting equipment can be seen by visiting Magnalight.com. Magnalight is a manufacturer and maintains a custom order capability. Magnalight can be contacted by calling 1-800-369-6671 or 1-214-616-6180 for international inquiries.

All Topics