High-Efficiency Power Supplies suit LED lighting applications.

Press Release Summary:

Operating from 120-277 Vac input, 25 W-rated LDS25 series delivers up to 700 mA at 36 Vdc, incorporates active PFC, and offers conversion efficiency of 86% typ. Constant current mode operates from 36-26 V, while constant voltage mode operates with load currents from 300-700 mA or to programmed current limit level that can be set by single resistor. Output current can be user-adjusted over full 0-700 mA range by IEC 60929-compliant dimming function, controlled via 0-10 V signal.

Original Press Release:

Emerson Network Power Adds 25 Watt Series to its Growing Portfolio of High Efficiency Power Supplies for LED Lighting

Carlsbad, Calif. - Emerson Network Power, a business of Emerson (NYSE:EMR) and the global leader in enabling Business-Critical Continuity(tm), today announced a new series of high efficiency power supplies for LED lighting, the LDS25 series. The new 25 watt series joins the company's LDS70 series 70 watt products for this fast-growing market. This off-the-shelf availability of high efficiency, pre-certified power solutions enables original equipment manufacturers and system installers to reduce their time-to-market significantly using reliable LED lighting drivers from one of the largest manufacturers of power supplies in the world.

Emerson Network Power's new LDS25 series 25 watt LED power supplies have an input range of 120 to 277 Vac and can deliver up to 700 mA at 36 Vdc. Constant current and constant voltage output modes accommodate different LED application requirements. Constant current mode operates from 36 V down to 26 V, while constant voltage mode operates with load currents from 300 to 700 mA or to the programmed current limit level - which can be set by a single resistor to any value within this range. Alternatively, the output current can be user adjusted over its full 0 to 700 mA range by an IEC 60929 compliant dimming function, controlled by a standard 0 to 10 V signal.

Active power factor correction enables the Emerson Network Power LDS25 power supplies to achieve a power factor of at least 0.9 and they have a high conversion efficiency of 86 percent typical. They are rated for operation over an ambient temperature range of minus 30 to 60 degrees Celsius or a case temperature range of minus 30 to 90 degree Celsius, with no need for forced air cooling. Ideal for a wide range of indoor applications, the new LDS25 LED lighting power supplies are available in open-frame and IP20 rated cased versions for customer flexibility. The open frame model has a very small footprint of 5.8 x 1.6 inches (147 x 42 mm) and a height of just 1.1 inches (28 mm), while the IP20 cased model is 6.87 x 1.80 inches (174.5 x 45.6 mm) and is 1.26 inches (32 mm) high.

Emerson Network Power LDS25 series power supplies fully comply with the CISPR 15 requirement for EMI and meet FCC part 15 conducted noise standards. They are comprehensively protected against short-circuit, overvoltage and overtemperature conditions. The LDS25 series additionally features hot-wiring protection, which automatically limits the rate of increase of output current to prevent damage to the LED and driver circuits.

Critical safety specifications include EN 61347-2-13 and UL 8750, which are specific to LED related applications, and the LDS25 series also complies with CSA C22.2 No. 107.1 and CE LVD directives.

Sample quantities of the LDS25 series LED power supplies are available now. For more information, see the LDS25 websheet (www.powerconversion.com/products/websheet/448/LDS25).

About Emerson Network Power
Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader in enabling Business-Critical Continuity(tm) from grid to chip for telecommunication networks, data centers, health care and industrial facilities. Emerson Network Power provides innovative solutions and expertise in areas including AC and DC power and precision cooling systems, embedded computing and power, integrated racks and enclosures, power switching and controls, infrastructure management, and connectivity. All solutions are supported globally by local Emerson Network Power service technicians. For more information on Emerson Network Power's embedded power products and services for original equipment manufacturers and system integrators visit www.Emerson.com/EmbeddedPower. Learn more about Emerson Network Power products and services at www.EmersonNetworkPower.com.

About Emerson
Emerson (NYSE: EMR), based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets through its network power, process management, industrial automation, climate technologies, and tools and storage businesses. Sales in fiscal 2010 were $21 billion. For more information, visit www.Emerson.com.

Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. All other product or service names are the property of their respective owners. (c) 2011 Emerson Electric Co.

More from Machinery & Machining Tools

All Topics