High-Density Switch Matrix reduces signal integrity degradation.
Press Release Summary:
Available for EX1200 Series multifunction switch/measure units, EX1200-SMP offers 16 integrated analog backplane lines. This lets designers create 16xN matrices as well as bridge together multiple carriers to create larger matrices with up to 704x8 two-wire inputs in one chassis. Supporting system configurations for switching applications that require flexibility of crosspoint matrix topology, unit can also be configured with either Resource or I/O matrix modules in any combination.
Original Press Release:
VTI Instruments Launches EX1200-SMP High-Density Switch Matrix Platform for Reduced Cabling and Increased Efficiency
IRVINE, CA – VTI Instruments (http://www.vtiinstruments.com) announced today the release of its EX1200-SMP high-density switch matrix platform for its EX1200 Series of multifunction switch/measure units. This newest addition in the EX product family features 16 integrated analog backplane lines, which reduces the need for external cabling that typically degrades signal integrity.
System designers can create 16xN matrices and easily bridge together multiple carriers to create even larger matrices, with up to 704x8 two-wire inputs in a single chassis. Increased board space allows for efficiency and performance gains for mixed signal applications in mechanical data acquisition and electronic test environments.
The EX1200-SMP supports system configurations for switching applications that require the flexibility of a crosspoint matrix topology. The four-slot main carrier can be plugged into any four slots of an EX1208A mainframe. One to four carriers can be accommodated in a single mainframe with the ability to mix and match with standard EX1200 series switch cards. For example, a 176x8 two-wire 2 Amp matrix can be combined with a 1.5 GHz RF multiplexer and 16 Amp general purpose relay modules to cover a wide range of application requirements.
The EX1200-SMP can also be configured with either Resource or I/O matrix modules in any combination, which allows point-to-point input/output (I/O) switching or mapping resources to Unit Under Test (UUT) I/O. Routing signals between Resource and I/O modules reduces external wiring. The product’s internal 16-line analog bus with integrated digital multimeter (DMM) maximizes performance.
VTI Instruments’ director of engineering Sangram Gaikwad notes, “The backplane of this product is designed so that each line is capable of functioning in a 50-Ω impedance environment or paired with adjacent channels to provide eight differential channels. The backplane is designed for high-bandwidth applications, with minimal insertion losses, and that’s something we think test engineers will appreciate because improved efficiency is built right into the EX1200-SMP.”
The compatible EX1208A mainframe module has a dedicated slot that can house an optional high-performance 6.5-digit DMM. When used as part of the measurement system, the DMM can be routed directly to five dedicated lines (Hi/Hi Sense, Lo/Lo Sense and Guard) on the analog backplane of the EX1200-SMP carrier. The DMM also can be disconnected from the analog backplane to free up the bus lines for use by other resources. The entire system supports typical bandwidths in excess of 20 MHz. “This platform delivers economies of scale without having to compromise signal integrity,” Gaikwad adds.
The EX1200-SMP addresses the requirements of test scenarios where very-high channel count matrix solutions are required. For example, designers of applications can benefit from the EX1200-SMP’s super-high-density, high channel count, reduced cabling needs, and ability to mix and match general purpose and RF modules. The product is ideal for:
General purpose ATE
Avionics test
Engine control unit (ECU) test
Thermal vacuum applications
For More Information
For images, data, specifications and to create a quote online, visit vtiinstruments.com/ex1200-smp. Contact VTI Instruments directly at 949.955.1894 or sales@vtiinstruments.com.
About VTI Instruments
VTI Instruments delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most-demanding test applications. The company's products and systems are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems.
VTI is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables VTIs customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments is a unit of AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical devices.
Tweet This
.@VTIInstruments Launches EX1200-SMP High-Density Switch Matrix to Reduce Cabling and Increase Efficiency #DAQ #ATE http://ow.ly/9Jhe302qpqV
About AMETEK Programmable Power
AMETEK Programmable Power designs, manufactures and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. It offers one of the industry’s broadest portfolios of programmable power products under the California Instruments, Sorensen, and Elgar brands.
AMETEK Programmable Power is a business unit of the AMETEK Electronic Instruments Group, a leader in advanced instruments for the process, aerospace, power and industrial markets and a division of AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical devices with 2015 annual sales of $4.0 billion.
For further information contact:
Craig Frahm
Tel: (858) 678-4459
E-mail: craig.frahm@ametek.com
Website: www.programmablepower.com