FOTEMP1-OEM-MNT Temperature Controller features built-in USB.

Press Release Summary:

Compatible with fiber optic sensors, FOTEMP1-OEM-MNT Temperature Controller is embedded with RS232 and SPI interfaces. Operated in temperature range of -200°C to +300°C, unit is suitable for high voltage transformers, MR imaging, semiconductor manufacturing, petrochemical plants, microwave ovens and reactors applications. Product monitors temperature up to 2000 m.


Original Press Release:

Micronor Introduces Low Cost OEM Fiber Optic Temperature Sensor Solution at Sensors Expo 2017

Designed for Environments where Thermocouples and RTDs Fall Short

Debuting at Sensors Expo (June 28-29, 2017), Micronor (Camarillo, CA USA) and Optocon AG (Dresden, Germany) have collaborated to create the FOTEMP1-OEM-MNT; a low cost, small form factor, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature Sensing into any industrial control system, medical instrumentation or other OEM design.

The compact FOTEMP1-OEM-MNT controller works with all TS series fiber optic temperature sensors, a measurement range of -200°C to +300°C, and standard built-in USB, RS232 and SPI interfaces. The product will be demonstrated at Micronor booth 735 at the McEnery Convention Center in San Jose, California.

On Wednesday, June 28, at 11:00am, Micronor will also be presenting a special live product presentation in the Sensors Expo Live Theater titled “Fiber Optic Temperature Sensors Outperform Thermocouples and RTDs in Challenging Environments.”

The FOTEMP methodology is based on the inherent temperature dependence of the Gallium Arsenide (GaAs) band gap. The signal conditioner couples a continuous broadband light source into the sensor’s large core 200µm optical fiber which illuminates a GaAs crystal mounted on the TS series sensor’s fiber tip. Similar to an optical filter, the crystal absorbs wavelengths below its bandgap and reflects the wavelengths above. The transition region between the reflected and transmitted spectrum, i.e. the band gap spectral position, is temperature dependent – shifting about 0.4nm/degree Kelvin. The FOTEMP controller’s internal optical spectrum analyzer interrogates the reflected optical signal, and then outputs the corresponding temperature value.

This absolute measurement technique ensures stable and accurate measurements over long term usage without the need for periodic recalibration. This is one of many areas where GaAs temperature sensors outperform other optical sensor techniques, including fluorescence decay, interferometric and fiber Bragg gratings. Monitoring the internal temperature of oil-filled transformers, with life expectancies of 20+ years, is one example of why GaAs-based temperature sensors are the sensor of choice for high reliability, mission critical applications. This sensing and interrogation method allows for lower cost, greater accuracy (±0.2ºC), and wider measurement range (-200°C to +300°C) compared to other fiber optic sensor techniques.

The product provides a discrete temperature monitoring solution that operates accurately and reliably in challenging environments where electronics-based temperature sensors (thermocouples, RTDs) cannot function. The fiber optic sensor’s entirely non-metallic, passive optical design provides immunity to electromagnetic interference (EMI), radio frequency interference (RFI), microwaves, high voltage, extreme magnetic fields, radiation, chemicals, and explosive atmospheres. In these environments, GaAs fiber optic temperature sensors enable new and unprecedented solutions impossible for electronic sensors.

Typical FOTEMP applications include monitoring temperature inside high voltage transformers and switchgear, MR imaging, semiconductor manufacturing, petrochemical plants, as well as microwave ovens and reactors used in food industry, material processing and bioengineering. The use of low loss optical fiber allows interference-free, remote temperature monitoring up to 2000 meters. Such distances are characteristic of mines, tank farms and downhole applications.

About Micronor:

Since 2003, Micronor Inc. has been a pioneer of innovative Fiber Optic Kinetic Sensors for both industrial and medical applications. Products include Fiber Optic Position Sensors, Rotary Encoders, Linear Encoders, Signaling, E-Stop, Microswitch, Accelerometer, and Temperature Sensors. These sensors are designed for challenging applications where immunity to EMI, RFI, microwaves, high voltage, magnetic fields, radiation and/or explosive atmospheres is required, as well as MRI compatibility or long distance operation. Micronor maintains regional sales, service, engineering, and manufacturing facilities in both California, USA and Switzerland.

PRODUCT DESCIPTION

Low Cost OEM Solution for Fiber Optic Temperature Measurement

Micronor’s FOTEMP1-OEM-MNT is a compact, low cost, single channel signal conditioner that seamlessly integrates Fiber Optic Temperature Sensing into any industrial control system, medical instrumentation or other OEM design. The FOTEMP1-OEM-MNT controller features a measurement range of -200°C to +300°C, ±0.2ºC accuracy, and built-in USB, RS232 and SPI interfaces. The product operates in conjunction with all TS series GaAs Fiber Optic Temperature Sensors to provide a discrete temperature monitoring solution that can operate accurately and reliably in challenging environments where electronics-based temperature sensors (thermocouples, RTDs) cannot function. The fiber optic sensor’s entirely non-metallic, passive optical design provides immunity to electromagnetic interference (EMI), radio frequency interference (RFI), microwaves, high voltage, extreme magnetic fields, radiation, chemicals, and explosive atmospheres. In these environments, GaAs fiber optic temperature sensors enable new and unprecedented solutions impossible for electronic sensors.

Contact:

Dennis Horwitz

Vice President, Sales & Marketing

Micronor Inc.

900 Calle Plano, Suite K

Camarillo, CA 93012 USA

Phone: (805) 389-6600

Fax (805) 389-6605

Email dennis@micronor.com

All Topics