Embedded Flash MCUs leverage ARM® Cortex(TM)-M0+ processor core.
Press Release Summary:
Featuring 12-bit analog and internal oscillators and up to eight 16-bit timer/counters, Atmel® SAM D20 series comprises 14 devices, available in 32-, 48- and 64-pin package options, with 16–256 KB Flash memory. Standard features, in addition to Atmel Event System, include capacitive touch support for button, slider, and wheel capability and proximity sensing. Each device includes 4–6 SERCOM modules, which can be configured from application to act as USART, UART, SPI, and I²C.
Original Press Release:
Atmel Announces New ARM Cortex-M0+ Microcontroller Family, Leveraging Two Decades of Microcontroller Leadership
Integrating Easy-to-Use Rich Peripherals, LCD Controller and USB to Provide Designers with Flexible, Ultra-low Power, High-Performance Solutions, Atmel SAM D20 Family Targets Automation, Consumer, Metering, and Industrial Applications
Bosch Sensortec Among First Adopters of the New Atmel Device
SAN JOSE, Calif. -- Atmel( )Corporation (NASDAQ: ATML), a global leader in microcontroller (MCU) and touch solutions, today announced the new Atmel(®) SAM D20, the first series in a new family of embedded Flash microcontrollers based on the ARM(®) Cortex(TM)-M0+ processor core and designed ideally for home automation, consumer, smart metering and industrial applications.
Leveraging two decades of microcontroller experience and success with the company's easy-to-use AVR- and ARM-based products, the new series combines innovative and proven technologies including intelligent peripherals with Atmel's Event System and capacitive touch support for button, slider and wheel capability and proximity sensing. The new SAM D20 series is also supported by the latest version of Atmel Studio and Atmel Software Framework, the integrated development platform for developing and debugging Atmel ARM Cortex-M and Atmel AVR(®) MCU- based applications.
Bosch Sensortec GmbH is among the first adopters of the new Atmel SAM D20 device. "Customers for our next-generation self-contained 9-axis absolute orientation sensor (BNO055) will benefit from the same high performance with lower power consumption. Atmel's SAM D20 device optimizes Bosch Sensortec's sensor fusion software at a level that was not previously possible," said Dr. Stefan Finkbeiner, CEO and General Manager, Bosch Sensortec GmbH, a global provider of micro-mechanical sensors for the consumer electronics market.
"Atmel's global leadership in MCUs and its partnership with ARM has enabled the company to launch its Cortex-M0+ ARM-based family," said Reza Kazerounian, Sr. Vice President and General Manager, Microcontroller Business Unit, Atmel Corporation. "In this era of the Internet of Things, MCUs, such as the SAM D20, are at the heart of every smart, connected device. Our SAM D20 family adds to our broad MCU portfolio, ranging from our industry-leading 8-bit AVR MCUs to our high-end Cortex-A5 MPUs. All our MCUs include unique peripheral sets, ultra-low power consumption, a complete integrated development platform, and easy-to-use development kits so designers can bring their products quickly to market."
Key Features of the Atmel SAM D20 Series
Atmel's SAM D20 Cortex-M0+ ARM-based series integrates several popular features including high-precision 12-bit analog and internal oscillators, up to eight 16-bit timer/counters, real-time performance, peripheral event system, and flexible clocking options and sleep modes.Â
The new devices also include a serial communication module (SERCOM module) that can be configured from the application to act as an USART, UART, SPI and I2C; each device in this new family includes four to six SERCOM modules. The newdevices are also designed for a simple and intuitive migration between devices with identical peripheral modules, hex compatible code, pin compatible migration paths, and a linear address map.
The family supports button, slider and wheel touch capability as well as proximity without the need for external components, and features 14 new devices available in 32-, 48- and 64-pin package options with 16 to 256KB of Flash memory.
Evaluation Kit
To accelerate design, the SAM D20 Xplained PRO evaluation kits are available today for USD $39. The kit features a 64-pin, 256KB SAM D20 device along with a programmer/debugger and hardware to evaluate both the processor and the peripherals. The Xplained( )PRO kit also comes pre-loaded with software that can easily be re-programmed, debugged and prototyped without any additional tools. To purchase a kit, visit the Atmel Store.
Pricing and Availability
Atmel is working with alpha customers that will go into volume production shortly. Samples of 128KB 32-pin, and 256KB 48-and 64 pin products are available in QFN and QFP packages now. Pricing starts at $1.02 USD for 1K units of the 16KB 32-pin QFN package.
More Information
Atmel's SAM D20 Cortex-M0+ MCU Family: www.atmel.com/microsite/samd20
Atmel ARM-based products: http://www.atmel.com/arm/default.aspx
Atmel YouTube Channel: www.atmel.com/youtube
Embedded Design Blog: www.atmelcorporation.wordpress.com
Twitter: www.atmel.com/twitter
LinkedIn: www.atmel.com/linkedin
Facebook: www.atmel.com/facebook
About Atmel
Atmel Corporation (NASDAQ: ATML) is a worldwide leader in the design and manufacture of microcontrollers, capacitive touch solutions, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on industrial, consumer, communications, computing and automotive markets.
© 2013 Atmel Corporation. All Rights Reserved. Atmel®, Atmel logo and combinations thereof and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. ARM(®) and Cortex(TM) are trademarks of ARM Ltd. Other terms and product names may be trademarks of others.
Press Contact:
Agnes Toan, PR Manager
Tel: (+1) 408-487-2963, Email: agnes.toan@atmel.com
