Press Release Summary:
Designed for 6 x 4.5 mm QFN package with 0.4 mm pitch, Model SG-MLF-7084 operates at bandwidths up to 30 GHz with less than 1 dB of insertion loss. Contact resistance is typically 20 mΩ per pin and current capacity is 2 A per pin. Socket is mounted using supplied hardware on target PCB with no soldering. Operating from -35 to +100Â°C, socket features pin self inductance of 0.118 nH and mutual inductance of 0.025 nH. Capacitance to ground is 0.229 pF.
Original Press Release:
30 GHz Bandwidth Socket for QFN34 Package
Socket your Quad Flat No Lead package using elastomer socket with superior electrical performance
EAGAN, MN -- Ironwood Electronics has recently introduced a new high performance elastomer socket for 0.4mm pitch QFN package. The SG-MLF-7084 socket is designed for a 6mmx4.5mm package size and operates at bandwidths up to 30 GHz with less than 1dB of insertion loss (GSSG configuration). The contact resistance is typically 20 milliohms per pin. Network analyzer reflection measurements for the G-S-S-G case were taken with all except the pins under consideration terminated into 50 Ohms. The socket is mounted using supplied hardware on the target PCB with no soldering, and uses smallest footprint in the industry. The smallest footprint allows inductors, resistors and decoupling capacitors to be placed very close to the device for impedance tuning. The socket also incorporates a simple hardware installation method so that IC's can be changed out quickly.
The SG-MLF-7084 sockets are constructed with high performance and low inductance elastomer contactor. The temperature range is -35C to +100 C. The pin self inductance is 0.118 nH and mutual inductance of 0.025 nH. Capacitance to ground is 0.229 pF and mutual capacitance is 0.025pF. Current capacity is 2 amps per pin.
Pricing for the SG-MLF-7084 is $324 at qty 1; with reduced pricing available depending on quantity required.
1335 Eagandale Court
Eagan, MN 55121
Tel: 952-229-8200 or (800) 404-0204