Press Release Summary:
BCM3047, BCM31442 and BCM3222 enable Converged Cable Access Platform (CCAP) vendors to build and deploy DOCSIS 3.1-compliant equipment that supports multiple Gigabit cable broadband speeds over coax. While BCM31442 upstream burst receiver integrates ADC supporting up to 300 MHz upstream spectrum,Â BCM3047 single-chip downstream transmitter integrates DAC enabling transmission out to 1.2 GHz in cable plant. BCM3222 media access control (MAC) device supports up to 25 Gbps.
Original Press Release:
Broadcom Delivers End-to-End Portfolio of Devices for DOCSIS 3.1
ARRIS, Harmonic to Integrate New Cable Network Equipment Technology to Enable Operators to Achieve Multi-Gigabit Speeds
AMSTERDAM – IBC 2015 - Broadcom Corporation (NASDAQ: BRCM), a global innovation leader in semiconductor solutions for wired and wireless communications, today announced three new DOCSIS 3.1-based devices for Converged Cable Access Platform (CCAP) equipment. The BCM3047, BCM31442 and BCM3222 enable CCAP vendors to build and deploy DOCSIS 3.1-compliant equipment that supports multiple Gigabit cable broadband speeds over coax to deliver new content and services to home subscribers. For more news, visit Broadcom's Newsroom.
Broadcom's new silicon for DOCSIS 3.1 CCAP equipment works in conjunction with Broadcom's recently announced BCM3390 device for cable modems to provide the industry's only end-to-end DOCSIS 3.1 solution. The platform enables cable operators to leverage the existing cable plant to compete with fiber optic service. Early adopters of Broadcom's DOCSIS 3.1 technology include both major cable operators such as Comcast and Liberty Global, and CCAP equipment suppliers such as ARRIS and Harmonic.
"The performance improvements offered by Broadcom's end-to-end DOCSIS 3.1 platform enables cable operators to cost effectively upgrade their head-end equipment for the delivery and use of a new range of subscriber content," said Dan Marotta, Broadcom Executive Vice President and General Manager, Broadband & Connectivity Group. "Today's new CCAP infrastructure devices, combined with the BCM3390 cable modem platform, provide a complete DOCSIS 3.1-based silicon solution with advanced capabilities that effectively compete with speeds offered by fiber deployments."
"End-to-end DOCSIS 3.1 technology, in both cable infrastructure and cable modems, is critical for subscribers to receive Gigabit speeds in the home," said Balan Nair, Liberty Global Executive Vice President and CTO. "DOCSIS 3.1 is making it possible for Liberty Global to deliver enhanced services to consumers later this year."
"DOCSIS 3.1 will allow Comcast to cost-effectively deliver faster and more reliable data speeds to our subscribers over our existing HFC network," said Tony Werner, Comcast Executive Vice-President. "Having DOCSIS 3.1 technology for both CCAP and home equipment will allow us to offer more and better speed options to more customers in 2015 and beyond."
"The evolutionary nature of DOCSIS technology continues with the introduction of the DOCSIS 3.1 specification, enabling an elegant and rapid upgrade of the growing installed base of ARRIS CCAP equipment around the world," said Tom Cloonan, ARRIS CTO, Network Solutions. "The efficiency gains enabled by DOCSIS 3.1 will ensure cable operators remain at the forefront of the Broadband industry and meet consumers' ever-increasing demand for richer, more interactive media experiences."
"DOCSIS 3.1 opens the door to a new generation of cable services," said Nimrod Ben-Natan, Harmonic Senior Vice President and General Manager, Cable Edge Business. "Broadcom's complete end-to-end solution in support of this standard enables Harmonic to provide cable operators with CCAP equipment that cost-effectively leverages their existing infrastructure to deliver Gigabit speeds today."
Broadcom's new chips provide a complete physical (PHY) and media access control (MAC) layer solution for operators deploying DOCSIS 3.1 in CCAP infrastructure equipment. The new PHY devices include the BCM31442 upstream burst receiver which receives transmissions from the home toward the network and BCM3047 downstream transmitter which supports transmissions from the network to the home. The new MAC device, the BCM3222, supports rapid and efficient cable modem access to network resources.
Key Features of the BCM3047 Transmitter
-- Industry's first single-chip transmitter with integrated high-speed digital to analog converter (DAC) enabling transmission out to 1.2 GHz on the cable plant
-- Supports up to 160 SC-QAM and up to 6 OFDM transmitters
Key Features of the BCM31442 Receiver
-- Industry's first DOCSIS 3.1 burst receiver with integrated analog to digital converter (ADC) supporting up to 300 MHz of upstream spectrum
-- Supports 2 upstream ports across 24 SC-QAM and 4 OFDMA receivers
Key Features of the BCM3222 MAC Device
-- Capable of supporting up to 25 Gbps
Broadcom's BCM3047, BCM31442 and BCM3222 are currently sampling.
For ongoing Broadcom news visit our Newsroom, read our B-Connected Blog, or visit us on Facebook or Twitter. And to stay connected, subscribe to our RSS Feed.
Broadcom Corporation (NASDAQ: BRCM), a FORTUNE 500® company, is a global leader and innovator in semiconductor solutions for wired and wireless communications. Broadcom® products seamlessly deliver voice, video, data and multimedia connectivity in the home, office and mobile environments. With the industry's broadest portfolio of state-of-the-art system-on-a-chip solutions, Broadcom is changing the world by Connecting everything®. For more information, go to www.broadcom.com.
Broadcom®, the pulse logo, Connecting everything® and the Connecting everything logo are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners.
T. Peter Andrew
Vice President, Treasury & Investor Relations