Data Converters offer sampling rates up to 250 MSPS.
Share:
Press Release Summary:
Housed in 7 x 7 mm, 48-pin QFN package, 12-bit Model ADS6129 and 14-bit Model ADS6149 are suited for communications, defense, and test and measurement equipment. Model ADS6149 features 70 dB signal-to-noise ratio and 80 dB spurious-free dynamic range for input frequencies ranging from DC to 250 MHz. At max sample rate of 250 MSPS, ADS6149 consumes 687 mW, and at sample rate of 150 MSPS, with dynamic power scaling, device consumes as little 490 mW.
Original Press Release:
TI Introduces Wide-Bandwidth, Low-Power, 12- and 14-Bit Data Converters up to 250 MSPS
New ADCs offer industry's highest dynamic performance while saving power in communications, defense, and test and measurement equipment
DALLAS, Oct. 13 /-- Texas Instruments Incorporated (TI) (NYSE:TXN) today introduced six 12- and 14-bit analog-to-digital converters (ADCs) with sampling rates as high as 250 MSPS (mega samples per second) to deliver a premium combination of wide signal bandwidth, high dynamic performance and low power consumption, enabling more efficient power amplifier linearization in digital pre-distortion (DPD) solutions, better range and sensitivity in radar and defense electronics and greater accuracy in high- speed test and measurement equipment. (For more information, see http://www.ti.com/ads6149-pr)
With 14-bit performance, the ADS6149 is the highest resolution 250-MSPS ADC in production, providing designers with maximum performance along with low power consumption. The ADS6149 and buffered input ADS61B49 offer the industry's highest dynamic performance at 250 MSPS with greater than 70 dB signal-to-noise ratio (SNR) and 80 dB spurious-free dynamic range (SFDR) for input frequencies ranging from DC to 250 MHz. At the maximum sample rate of 250 MSPS, the ADS6149 consumes only 687 milliwatts (mW). At a sample rate of 150 MSPS, with dynamic power scaling, the device consumes as little 490 mW.
"The device's low power consumption allows our new generation of wireless and radar receivers to realize high channel density with high performance. This translates into reduced system cost and enables new applications that require tight integration of multiple channels with signal processing on a single card," said Dan McLane, co-founder of Innovative Integration.
The complete ADS61xx family of devices is highly flexible, which makes it easier for designers to maximize performance for their specific application. A 1- to 6-dB programmable gain option allows customers to optimize SNR, SFDR and input swing based on the unique needs of their application. For instance, designers can maximize SNR to enhance linearization effectiveness in DPD solutions, while SFDR can be increased and input drive reduced to improve small-signal analysis in defense and radio receiver applications. To further enhance flexibility, the ADS61B49 and ADS61B29 ease analog front end design by incorporating a fully differential input buffer. This buffer provides constant input impedance over input frequency and eliminates kickback from the ADC's track-and-hold circuit to ensure consistent linearity of the signal. And to provide a flexible digital interface, the ADS61xx family of devices features user-selectable parallel CMOS or differential double data rate (DDR) LVDS output options.
TI offers a wide variety of devices to complete the signal chain, including those listed below to maximize performance, ease design and speed time-to-market. The devices are pin-compatible with previous-generation high-speed devices including the ADS5547/27.
Application A/D D/A Amplifier Clocking RF DSP
Defense ADS6149 DAC5682Z THS4509 CDCE72010 TRF3761 C6000
ADS6148 DAC5681Z THS9001
Test and
Measurement ADS6149 DAC5681Z THS4509 CDCE72010 TRF3761 C6000
ADS61B49 DAC5681 THS4513
ADS6148 THS4520
Wireless
Communications ADS6129 DAC5682Z THS4509 CDCE72010 TRF3703 C6000
ADS61B29 DAC5688 TRF3761
ADS6148
ADS6128
Availability and packaging
The ADS6149 and ADS6129 are available today in a small 7-mm x 7-mm, 48-pin QFN package. The remaining four pin-compatible members of the ADS61xx family will release to production over the remainder of 2008. In addition, TI will offer a complete line of evaluation modules for the entire family of ADCs. Customers can also use TI's TSW1200 digital capture tool for rapid evaluation of ADCs of up to 16-bit resolution and 500-MSPS sample rates to further speed development time. Samples and tools are available at www.ti.com/ads6000 Pricing is listed below for each device in the family in 1000-piece quantities.
Part Speed Resolution Power Price
Number (MSPS) Consumption 1000-piece
ADS6149 250 MSPS 14-bit 687 mW $96.50
ADS61B49 250 MSPS 14-bit 790 mW $99.95
ADS6148 210 MSPS 14-bit 628 mW $82.50
ADS6129 250 MSPS 12-bit 687 mW $59.00
ADS61B29 250 MSPS 12-bit 790 mW $62.45
ADS6128 210 MSPS 12-bit 628 mW $45.00
The ADS61xx family is the newest of TI's high-speed and precision data converters for a wide range of applications including industrial, communications, audio and medical. To download the latest Amplifier and Data Converter Selection Guide, visit the Analog eLab(TM) Design Center at http://www.ti.com/analogelab.
About Texas Instruments
Texas Instruments (NYSE:TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through manufacturing, design and sales operations in more than 25 countries. For more information, go to http://www.ti.com/
Trademarks
Analog eLab is a trademark of Texas Instruments. All other trademarks and registered trademarks are property of their respective owners.
Web site: http://www.ti.com/
http://www.ti.com/analogelab
http://www.ti.com/ads6000
http://www.ti.com/ads6149-pr
