Compact Excavator maximizes productivity in confined spaces.

Press Release Summary:



With 9 ft 8 in. max digging depth and 4,079 lb bucket breakout, 6,217 lb and 4 ft 11.1 in. wide model 250Z features standard track drive system, Zero-Tail-Swing design, and 20.4 hp, electronically-controlled Yanmar Tier IV emissions-certified diesel engine. No engine regeneration is required, and electric glow plug starting aid facilitates cold weather starting. Other features include joystick controls; 2-position, high-speed travel switch; and digital operator interface.



Original Press Release:



Mustang 250Z Compact Excavator



Maneuverable, compact powerhouse with impressive dig depth and reach



TECHNICAL SPECIFICATIONS

250Z

Operator’s Station Canopy/Cab

Weight – Canopy/Cab (kg) 5,919/6,217 lbs. (2685/2820)

Max. Digging Depth (mm) 9'8" (2950)

Gross Power (kW) 20.4 hp (15.2)

Net Power (kW) 19.7 hp (14.7)

Width (mm) 4'11.1" (1500)

Bucket Breakout (kg) 4,079 lbs. (1850)



FEATURES

The all-new Mustang 250Z compact excavator goes above and beyond the size class expectations with its groundbreaking performance features and technology. This new model incorporates innovative features that enhance productivity, operator comfort, efficiency and cost savings on the jobsite. This compact powerhouse brings 8 inches (203 mm) deeper dig depth and 8.3 inches (211 mm) additional reach at ground level compared to the previous model, the 270Z.



The new 250Z is equipped with a 20.4 hp (15.2 kW) electronically-controlled Yanmar Tier IV emissionscertified diesel engine. No engine regeneration is required on the 250Z, reducing downtime on the jobsite. Low exhaust position on the machine reduces noise, increases safety and improves visibility.



Cold-weather starting is easy with an electric glow plug starting aid, reducing the need for block heaters or starting fluid.



The operator’s station on the 250Z compact excavator is built for optimal productivity and controllability. Joystick controls, operated by simple wrist movements, reduce fatigue during a long work day. The controls on the 250Z include a proportional auxiliary hydraulic rocker switch with detent on the joystick. This allows the operator to adjust the hydraulic flow for precise attachment performance while keeping his/her hands on the joysticks. The operator can easily select standard ISO or an optional backhoe control pattern with a turn of a mechanical lever. The two-position, high speed travel switch is conveniently integrated in the blade control lever for easy accessibility.



A digital operator interface features an hour meter and clock, recordable maintenance history with adjustable time intervals and reminders, fluid levels, fluid temperature, and more. Machine hours can be reviewed for the past 90 days without starting the engine. Multiple language selections are also available.



The operator’s compartment is designed with comfort in mind. A 4-way adjustable seat offers custom height, weight and backrest positions with a retractable belt. Elevated, folding travel pedals allow for additional foot room when performing stationary work. An optional cab enclosure with heat provides comfort and protection in extreme weather conditions. Auxiliary hydraulic flow rate up to 13.6 gpm (51.3 L/min), paired with high system pressure up to 2,987 psi (206 bar), deliver more hydraulic muscle to power demanding attachments and deliver superior digging and breakout forces. The two-way and one-way auxiliary flow valve allows for directto-tank bypass, while return flow selection is standard equipment. Two variable and two gear pumps bring simultaneous operation without loss of power.



Serviceability is made easy on the 250Z compact excavator. Tool-free access panels give quick and easy access to the hydraulic tank, engine compartment, control valve, air cleaner and control pattern valve.



A standard track drive system (compared to an offset track drive on the 270Z) provides long life and allows for easy aftermarket track replacement.



The 250Z, along with the other Mustang compact excavators, feature a Zero-Tail-Swing design to maximize productivity in confined spaces. The cast side protectors add armor at the base of the upper structure. Other important performance features include a high-strength boom with sliding cylinder guards that protect the rods from damage. The Power-a-Tach® hydraulic quick coupler enables attachment changes by the flip of a switch inside the cab. The operator leaves the seat only to engage and disengage the safety pin.



APPLICATIONS

The Mustang 250Z compact excavator is positioned in the North American market to meet the needs of contractors, agricultural customers, and the rental industry. Mustang Compact Excavators excel in applications such as grading, trenching, digging, demolition and recycling and light utility construction. Their compact nature and zero-tail-swing design make them ideal in situations where space is limited.



INTERVIEW

“When adding the 250Z to the Mustang compact excavator family, we were focused on our customers’ requests for a smaller machine with improved performance, technology and ergonomics,” says Nathan Ryan, Product Manager for Mustang compact excavators. “The 250Z will replace the 270Z, giving our customers a machine that can easily be transported by trucks in the 3-ton size class. Even though the 250Z is smaller than the 270Z, this EPA Tier IV-certified model boasts an increase in dig depth and reach at ground level. Operators will also notice enhancements in comfort with a larger cab, nearly pedal-free flat floor, and 4-way adjustable seat. In addition, we’ve taken this opportunity to incorporate some of customers’ favorite features from our larger models, like proportional auxiliary hydraulics with detent, and an integrated digital display with service reminders and usage monitoring. Owners will be pleased with the features and performance of the new 250Z, combined with rugged durability they expect from Mustang compact excavators.”



Additional product information is available at www.mustangmfg.com

Corporate information is available at: www.manitou-group.com

Press information: l.heidecker@manitou-group.com

Tel.: 262-334-9461

All Topics