Belt Conveyor Oven features 2 work zones.

Press Release Summary:

Designed with aluminized steel interior/exterior and 4 in. insulated walls, 500°F electrically heated No. 992 is equipped with 48 kW Nichrome wire elements to heat oven chamber and 4,000 cfm, 2 hp recirculating blowers with vertical downward airflow to workload. Conveyor belt is 30 in. wide, 1 x 1 in. high carbon steel flat wire, powered by 1/3 hp motor drive, variable from 0.5-10 ipm. Two 16 in. dia tubeaxial fans, driven by ¾ hp motor, push/pull air through cooling zones.


Original Press Release:

500ºF Electric Two-Zone Belt Conveyor Oven

No. 992 is an electrically-heated, 500ºF (~260ºC) two-zone belt conveyor oven from Grieve, currently used for drying and curing ceramic cement at the customer's facility. 48 KW (24 KW per zone) are installed in Nichrome wire elements to heat the oven chamber, while 4000 CFM (2000 CFM in each zone) are provided by two 2-HP recirculating blowers with vertical downward airflow to the workload. Each of the two work zones in this belt conveyor oven consists of a 2' long insulated, unheated entrance vestibule; 4' long insulated heat zone with recirculating airflow; 2' long insulated, unheated exit vestibule; 1' long open zone; 5' long cooling zone and 1' long open belt loading and unloading zone. The conveyor belt on No. 992 is 30" wide, 1" x 1" high carbon steel flat wire, powered by a 1/3-HP motor drive, variable from 0.5 to 10 ipm. Also onboard this oven are two 16" diameter tubeaxial fans, each driven by a 3/4-HP motor to push/pull air through the cooling zones. The Grieve conveyor oven further features 4" insulated walls, aluminized steel interior and exterior, plus two doors for access to the workspace and heating chambers. Controls on No. 992, provided in one cabinet for each of the two heating zones (as shown in photo), include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch. For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546- 9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.

More from Fluid & Gas Flow Equipment

All Topics