American Kuhne, Inc. and Teknor Apex Team up for First-Ever Extrusion Run of PVC-Free High Tolerance Medical Tubing, at up to 830 FT/Minute Line Speed
Teknor Apex's Medalist® Medical Elastomer Was Run on a Tubing Line at a Recent American Kuhne Open House Held on May 25th at American Kuhne in Ashaway, RI
NEW YORK, June 7, 2011: At a recent American Kuhne Spring Open House, American Kuhne and Teknor Apex teamed up to display a PVC- free medical tubing line that ran at speeds up to 830 ft/min while processing Teknor Apex's Medalist® medical elastomer, the companies announced jointly at MD&M East.
The high speed extrusion line ran a 0.105 in. (2.67mm) OD x 0.020 in. (0.508mm) wall tube up to 830 ft/min (253 m/min.) line speed. At 600 ft/min (183 ft/min) line speed, tight tolerances of +/- 0.0004 in. on the OD and +/- 0.0001 in. on the wall thickness were held. The extrusion system consisted of an American Kuhne ULTRA series 2.0 in. (50 mm) extruder with AKcess Level II Touchscreen System; inline spiral flow die head; Conair multi-pass vacuum tank with servo driven wheel to minimize the rubber band effect and to minimize tension within the process; servo driven nip roller puller; automatic cut and transfer coiler and a Zumbach ID/OD/WALL tube measurement system with closed-loop control of the OD and wall thickness. The compound used in this run was MD-585, an 83 Shore A compound that is part of the Medalist® MD-500 series for tubing applications.
"American Kuhne is a premiere supplier of extrusion systems and has great expertise in the technology for producing medical tubing," noted Nick Sandland, senior medical marketing manager for the Thermoplastic Elastomer Division of Teknor Apex. "The company's flawless high-speed demonstration run of our Medalist elastomer adds new confirmation that MD-500 series tubing compounds truly are fully practical alternatives to PVC."
Recent innovations in radio frequency welding, adhesive bonding, and solvent bonding enable components produced from Medalist elastomers to be used as readily as PVC in the assembly of medical devices, Sandland noted. "Today it's clear that Medalist MD-500 compounds provide the total package of requirements for successful tubing applications-processability, ease of fabrication, and outstanding end-use performance."
American Kuhne Seminar Focused on Extrusion Technology for Medical Applications
The American Kuhne Spring Medical Seminar and Open House offered participants valuable technical knowledge and processing tips about medical extrusion. The sold-out two-day event attracted over 80 participants.
The key message delivered for Teknor Apex at the event was that the Medalist® MD-500 Series compounds are the first fully practical alternative to PVC for many tubing applications, noted Sandland. "It's not just that they provide mechanical properties equal to or better than those of the flexible PVC widely used for medical tubing; at least as important, they yield tubing that looks and handles like PVC. This means similar crystal clarity, clamp resilience, resistance to kinking and necking, and an overall PVC-like 'feel'".
Sandland also cited some important advantages over PVC: "Medalist elastomers are substantially more flexible. They are less dense, meaning that one can process more feet of tubing per pound of compound. And they exhibit minimal color shift upon heat aging after exposure to gamma irradiation, the most severe type of sterilization."
A typical compound in the series, Medalist MD-575, actually exhibits 70% less heat-aged color shift than a gamma-stabilized PVC compound of comparable hardness.
"The Medalist material was easy to handle while stringing up the line and also while coiling at the end of the line," said Steve Maxson, VP Extrusion Systems of American Kuhne. "The material is extremely forgiving, with very stable processing conditions at high extruder output levels, which means that tight tolerance levels can be achieved at very high production line speeds."
AMERICAN KUHNE, INC. is a leading worldwide supplier of standard and customized single screw extruders, feed screws, extrusion systems and extrusion process controllers. Extruder sizes range from 1/2" (12.7mm) through 12-inch (305mm). They are designed and built in Ashaway, RI. Turnkey pipe, tubing and profile systems are also developed, tested and manufactured within their plant. In addition, the company maintains two medical tubing lab lines capable of multi-lumen and taper tube extrusions available for customer trials in their facility in Ashaway RI and their European facility at Kuhne GmbH in St. Augustin Germany. www.americankuhne.com
TEKNOR APEX COMPANY is a diversified plastics compounder that sells in 90 countries and operates manufacturing facilities in the U.S., Europe, and Asia. The Thermoplastic Elastomer Division's Medalist® high-purity medical elastomers are available with hardness from Shore OO 25 to Shore A 87, include clear, translucent, and opaque formulations, and have applications ranging from film and tubing to molded components and wire and cable. An expandable registered binder with a wealth of test data on Medalist products and resources for designers and processors is available to qualified OEMs, designers, and plastics processors in the medical device and healthcare product industries. It can be requested from the Medalist website at www.medalistmd.com or by emailing Teknor Apex at medalist@teknorapex.com. Other Teknor Apex plastics businesses include the Bioplastics, Nylon, Specialty Compounding, and Vinyl Divisions and Teknor Color Company. www.teknorapex.com.
Contact Information:
For Teknor Apex:
Press Contact: Martino Communications Inc
Robert J. Martino. Tel: 1 (914) 478-0754
bob@martinocommunications.com
Nick Sandland, Sen. Medical Mktg. Mgr
Teknor Apex Company, TPE Division
1 (401) 725-8000. nsandland@teknorapex.com
For American Kuhne:
Press Contact: Siy Communications
Andrea Siy. Tel: 1 (978) 465-6363
andrea@siycommunications.com
Steve Maxson, VP, Extrusion Systems
American Kuhne, Inc.
1 (401) 326-6205. smaxson@americankuhne.com
