700-TH-50-SS MUNSON® Rotary Batch Mixer is equipped with integral lump breaker.

Press Release Summary:

700-TH-50-SS MUNSON® Rotary Batch Mixer offers inline de-agglomeration of compacted bulk materials. Unit is equipped with dual rotors with three-point, single-piece, and stainless steel breaking heads. Product is incorporated with synchronized shafts which rotate at 120 RPM and features bed screen apertures which range from 1/16 to 2½ in. in diameter. This mixer is incorporated with horizontal drum and offers useable batch capacity of 50 cu ft. 700-TH-50-SS comes with weight capacity of 4000 lbs.

Original Press Release:

Rotary Batch Mixer with Integral Lump Breaker Achieves Uniformity in 1 To 3 Minutes

A new MUNSON® Rotary Batch Mixer with integral Lump Breaker provides inline de-agglomeration of compacted bulk materials before blending batches gently with total uniformity in one to three minutes.

Inline stacking of the low profile De-Clumper™ model RDC-1515-SS atop the stationary inlet of the model 700-TH-50-SS mixer minimizes headroom requirements while eliminating the need for flexible connections or hard piping between the units.

Material entering the system is de-lumped by dual rotors with three-point, single-piece, stainless steel breaking heads rotating with minimum clearance inside a curved, perforated bed screen. The synchronized shafts rotate at 120 RPM to prevent heating and degrading of the product.

On-size material passes through bed screen apertures which range from 1/16 to 2½ in. (25 to 64 mm) in diameter, immediately prior to entering the stationary inlet of the mixer.

As the mixer's horizontal drum rotates, proprietary mixing flights tumble, turn, cut and fold the material, imparting minimal energy to the batch, minimizing or eliminating degradation.

According to the company, total uniformity is achieved in less than three minutes regardless of disparities in the bulk densities, particle sizes or flow characteristics of batch ingredients.

The internal flights lift and direct the entire batch into the stationary discharge spout for evacuation with no residual “heel” of material requiring manual removal, eliminating waste and improving product quality while facilitating rapid, thorough cleaning.

The mixer has a useable batch capacity of 50 cu ft (1.42 m3) and weight capacity of 4000 lbs (1814 kg), and is said to be equally effective in blending of batches from 100 percent to as low as 5 percent of rated capacity.

The company also offers Rotary Batch Mixers in capacities from 10 to 600 cu ft (0.28 to 17 m3) and Lump Breakers with inlets from 12 to 48 in. (305 to 1219 mm) square, as well as Continuous Rotary Blenders, Variable Intensity Blenders, Vee Cone Blenders, and Ribbon-Paddle-Plow Blenders. Size reduction equipment produced by the company includes Screen Classifying Cutters, Centrifugal Impact Mills, Attrition Mills, Hammer Mills and Shredders.

For information contact Munson Machinery Company, Inc., 800-944-6644, info@munsonmachinery.com, www.munsonmachinery.com