U.S. DOT Issues Emergency Testing Order for Transport of Crude Oils


Grabner Instruments MINIVAP VPXpert Meets Need for Reliable Vapor Pressure Testing of Crude Oil



Vienna, Austria – The US Department of Transportation (DOT) has issued an Emergency Testing Order that requires all shippers to test crude oil from the Bakken region to ensure the proper identification of the crude oil before it is transported by rail. The Emergency Testing Order is in response to a number of recent incidents involving the derailment of trains transporting crude oil from Canada to the United States.



Shippers are required to comply with Hazardous Materials Regulations (HMR) that include testing of vapor pressure and flashpoint to ensure proper transportation and packing. To meet these regulations, Vienna-based vapor pressure specialist AMETEK Grabner Instruments offers specialized instrumentation to test crude oil vapor pressure under various filling levels and temperatures.



There has been a steep increase in the number of rail carriages transporting crude oil from Canada to the United States. The oil industry has found that building rail infrastructure for new shale oil and gas fields can be simpler and more flexible than pipelines. However, this increased use of rail transport has resulted in an increase in the number of accidents and has led to greater scrutiny. The estimated cost of the damages from these accidents has topped $1 billion US$ and caused significant environmental damage.



Accident investigations have highlighted the need for more accurate classification of crude oils. Classification has often been based solely on safety data sheets, many of them outdated. As a result of these investigations, US DOT issued several Emergency Testing Orders with the most recent amended version issued on March 6, 2014 and addressed to shippers of petroleum crude. The order specifically requires the flashpoint and boiling point testing of crude oils and endorses the requirement that crude oil shipments follow volatility testing defined by Hazardous Material Regulations (HMR). In HMR, the testing of crude oil vapor pressure is critical in determining the requirements for safe packing for transport. A boiling over of crude oils can result from a pressure build-up inside a rail carriage. This risk increases significantly if the crude oil includes gaseous components.



When testing crude oil samples, it is of utmost importance that the sample is properly handled to keep the light ends in the crude oil prior to vapor pressure testing. Crude oils may be misclassified if hazardous volatiles are allowed to evaporate prior to sampling. One solution is to ensure that the crude sample is pressurized when delivered to the vapor pressure tester.



AMETEK Grabner Instruments has developed a proven method for effectively testing pressurized crude oils under varying transport conditions. The company offers a package for the safe, air-tight and pressurized transportation of crude oil to the vapor pressure tester. The crude oil with all of its light ends is captured inside a high-quality floating piston cylinder (FPC). Once this cylinder is connected to the MINIVAP VPXpert vapor pressure instrument, testing can begin immediately. This versatile analyzer is able to test vapor pressures at temperatures ranging from 0 to 120°C, and to perform tests at vapor-to-liquid ratios (V/L) ranging from 0.02/1 to 4/1 to simulate the various fill levels encountered during transportation.



AMETEK Grabner Instruments also offers a process version of its vapor pressure analyzer for online monitoring that operates using the same principle as the laboratory version. The Grabner analyzers provide a method for determining the True Vapor Pressure or Bubble Point Pressure of crude oils. Bubble Point Pressure is the most extreme condition in vapor pressure testing and occurs when a container is filled completely to the top.



The Grabner method of measuring crude oil was standardized in 2003 as ASTM D6377 Standard. Since its introduction, the D6377 method has gained industry wide acceptance and quickly replaced the old manual Reid method ASTM D323. In 2013, the US Environmental Protection Agency approved ASTM D6377 as an alternative method of measuring the vapor pressure of crude oils.



Press contact: Hannes Pichler, hannes.pichler@ametek.at, Tel: +43 / 1 / 282 16 27-13



GRABNER INSTRUMENTS, a subsidiary of AMETEK Inc., is considered one of the world´s leading developers and manufacturers of automatic petroleum testing equipment. Grabner Instruments' success is based on the development of portable, rugged and easy-to-operate fuel and oil analyzers for accurate quality control in the laboratory as well as for fast on-site tests in mobile laboratories.



AMETEK, Inc. is a leading global manufacturer of electronic instruments and electromechanical devices with annual sales of $3.6 billion. AMETEK's corporate growth plan is based on four key strategies: Operational Excellence, Strategic Acquisitions and Alliances, Global and Market Expansion, and New Products. AMETEK is an NYSE-listed stock and a component of the S&P 500 Index.



GRABNER INSTRUMENTS Messtechnik GmbH

Dr. Otto Neurathgasse 1 | A-1220 Vienna | Austria

T +43 1 282 16 27-0 | F +43 1 280 73 34

sales.grabner-instruments@ametek.at | www.grabner-instruments.com



AMETEK Oil & Gas Business Unit

2001 N Indianwood Ave | Broken Arrow | OK 74012 | USA

T +1 918-250-7200 | F +1 918-459-0165 | www.ametekoilandgas.com




All Topics