New! Never Installed Tube & Pipe Machinery for Sale

Universal Tube & Rollform Equipment Corp. May 26, 2017

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462

Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System

Specifications:

Max Tube O.D.: 3.125″ (79.3 mm)

Min Tube O.D.: 1″ (25.4 mm)

Max Round Wall: .134″ (3.40 mm)

Max Shapes Wall: .120″ (3.04 mm)

Min Wall: .032″ (.812 mm)

Single Point Adjustment

Rafted

Get Quote: http://www.utubeonline.com/product/3-inch-new-tube-mill-line/

NEW! 7-1/2″ x .240″ Tube Mill Line, Stock #2747

Equipped With: Coil Car, Uncoiler, Shear & End Welder, Flattener, Horizontal Accumulator, Forming Mill, Sizing Mill, Drive Motors, Central Lube System and Tooling.

Specifications:

Max Tube O.D.: 7-1/2″ (190 mm)

Min Tube O.D.: 2.3″ (58.4 mm)

Max Thickness: .240″ (6.09 mm)

Max Square O.D.: 6″ x 6″ (152 mm x 152 mm)

Min Square O.D.: 2″ x 2″ (50.8 mm x 50.8 mm)

Get Quote: http://www.utubeonline.com/product/7-12-190-mm-x-240-6-09-mm-new-tube-mill-line/

NEW! 3″ x .166″ SFM Rafted Tube Mill, Stock #3115

Equipped With: Forming Mill, Welding Section, Sizing Mill and Dive Motors.

Specifications:

Max Tube O.D.: 3″ (76.2 mm)

Min Tube O.D.: 1″ (25.4 mm)

Max Thickness: .166″ (4.21 mm)

Min Thickness: .032″ (.812 mm)

Single Point Adjustment

Rafted

Get Quote: http://www.utubeonline.com/product/new-3-76-2-mm-x-166-4-21-mm-sfm-rafted-tube-mill/

NEW! 300 KW High Frequency Solid State Welder, Stock #3443

Equipped With: Main Transformer, Rectifier Cabinet, Operator Cabinet, Output Cabinet and Heat Exchanger.

Specifications:

Primary Volts: 480 V, 3 PH, 60 Hz

Primary Power: 450 KVA

Output Power: 300 KW

Output Frequency: 300 KHz

Machine Efficiency: 82% – 85%

Get Quote: http://www.utubeonline.com/product/new-high-frequency-solid-state-welder/

NEW! 500 KW THERMATOOL Seam Annealer, Stock #2926

Specifications:

KW Rating: 500 KW

Frequency:

Input Data: Volts: 460

Freq.: 60

Phase: 3

Amps: 734

KVA: 555

P.F.: .92

Get Quote: http://www.utubeonline.com/product/500-kw-thermatool-seam-annealer/

NEW! 3″ x .160″ UCG High Speed Flying Cold Saw, Stock #3428

Equipped With: Drive Controls, UCG U-TRAK Length Measurement Encoder System and Clamp System.

Specifications:

Max Speed: 325 FPM (100 m/min.)

Max Wall: .160″ (4.06 mm)

Min Wall: .030″ (.762 mm)

Max Tube O.D.: 3″ (76.2 mm)

Max Square O.D.: 2.5″ (63.5 mm)

Max Rectangle O.D.: 1-1/2″ x 3″

(38.1 mm x 76.2 mm)

Get Quote: http://www.utubeonline.com/product/new-high-speed-flying-cold-saw/

NEW! UCG U-TRAK Length Control System for Cut-Offs

This is a closed loop servo and ball screw system that will accurately control the die on almost any press. The U-TRAK Length Control System is perfect for use on tube mill and rollformer upgrades.

Max Line Speeds:

U-TRAK TW - 130 FPM

U-TRAK 1 - 175 FPM

U-TRAK 2 - 250 FPM

U-TRAK B - 600 FPM

U-TRAK HD - 135 FPM

U-TRAK R - Controls your existing hydraulic accelerator with Hi-Speed electronics for greater accuracy and reliability.

Get Quote: http://www.universalcontrolsgroup.com/utrak-length.html

NEW! 10″ x .100″ KENT Shear & End Welder, Stock #3334

Equipped With: 3 Blades Air Shear, Air Clamps, Auto TIG Torch and Threadless Patented “Rolex” Torch Drive Nut for Perfect Smooth Welds.

Specifications:

Max Strip Width: 10″ (254 mm)