Products in the News

Press Release Summary:

Jun 11, 2012 - New cutting tool inserts and toolholders from Walter USA, LLC expands and strengthens grooving products line-up. Waukesha, WI - Walter USA, LLC has announced a series of enhancements to its line of grooving products. Heading the bill is the RF8 profiling insert, which features excellent chip control and a precision ground, sharp cutting edge designed for difficult to machine materials. While this geometry is excellent for stainless steel, high temperature alloys, and steels, it is also good on all materials where a light depth of cut is required, which in turn makes chip control more challenging. It also reduces cutting forces on thin or unstable components. The RF8 undercuts up to 230 degrees processing angle and provides a very high level of surface quality. The CF6 cutting tool insert geometry, a key part of this product line extension, also has light cutting forces and is excellent for small parts and thin wall tubes. The new 1.5mm insert, combined with the 10 degree lead angle for reduced pip and burr formation makes this a very effective system for parting off. Walter has also announced the introduction of inch dimension grooving and groove turning inserts in the tough new Tigerotec® Silver grades WSM33S and WSM43S. TheUF4 geometry for grooving and groove-turning, RD4 geometry for radius grooving and profiling, and new 1.5 mm wide parting off inserts with 10 degree lead angle for reduced pip and burr formation. Additional toolholders in the grooving system now available as part of this product line enhancement include: G1011 grooving and cutoff toolholders with ½-in. or 5/8-in. shanks, and 1-in. shank tools with increased depth of cut up to 1.26-in.; G1111 face grooving tool holders for face groove diameters from 1.3-in. to 19.7-in.; and G1511 and G1521 tools for snap-ring and O-ring grooves, which are capable of both radial and face grooving operations for groove depths up to 0.236-in. Walter USA, LLC offers an extensive line up of cutting tools for milling, drilling, turning, boring and specialized tooling for unique applications through its competence brands Walter Valenite, Walter Titex and Walter Prototyp. As well as multi-level service programs through its Walter Multiply brand. Headquartered in Waukesha, Wisconsin the company has a strong network of distributors and field engineers across North America. The Walter name is synonymous with productivity, thanks to more than 80 years of developing cutting tools and inserts that set new standards in production. Walter USA, LLC combines over 75 years of U.S.-based tooling production with long-standing traditions of quality and innovation. Walter USA, LLC
N22 W23855 Ridgeview Pkwy West
Waukesha, WI 53188
800.945.5554
www.walter-tools.com/us

Walter USA, Inc. - Waukesha, WI

Original Press Release

New Grooving Products from Walter

Press release date: May 31, 2012

New cutting tool inserts and toolholders from Walter USA, LLC expands and strengthens grooving products line-up. Waukesha, WI - Walter USA, LLC has announced a series of enhancements to its line of grooving products. Heading the bill is the RF8 profiling insert, which features excellent chip control and a precision ground, sharp cutting edge designed for difficult to machine materials.

While this geometry is excellent for stainless steel, high temperature alloys, and steels, it is also good on all materials where a light depth of cut is required, which in turn makes chip control more challenging. It also reduces cutting forces on thin or unstable components. The RF8 undercuts up to 230 degrees processing angle and provides a very high level of surface quality.

The CF6 cutting tool insert geometry, a key part of this product line extension, also has light cutting forces and is excellent for small parts and thin wall tubes. The new 1.5mm insert, combined with the 10 degree lead angle for reduced pip and burr formation makes this a very effective system for parting off.

Walter has also announced the introduction of inch dimension grooving

and groove turning inserts in the tough new Tigerotec Silver grades WSM33S and WSM43S. TheUF4 geometry for grooving and groove-turning, RD4 geometry for radius grooving and profiling, and new 1.5 mm wide parting off inserts with 10 degree lead angle for reduced pip and burr formation.

Additional toolholders in the grooving system now available as part of this product line enhancement include: G1011 grooving and cutoff toolholders with -in. or 5/8-in. shanks, and 1-in. shank tools with increased depth of cut up to 1.26-in.; G1111 face grooving tool holders for face groove diameters from 1.3-in. to 19.7-in.; and G1511 and G1521 tools for snap-ring and O-ring grooves, which are capable of both radial and face grooving operations for groove depths up to 0.236-in.

Walter USA, LLC offers an extensive line up of cutting tools for milling, drilling, turning, boring and specialized tooling for unique applications through its competence brands Walter Valenite, Walter Titex and Walter Prototyp. As well as multi-level service programs through its Walter Multiply brand. Headquartered in Waukesha, Wisconsin the company has a strong network of distributors and field engineers across North America. The Walter name is synonymous with productivity, thanks to more than 80 years of developing cutting tools and inserts that set new standards in production. Walter USA, LLC combines over 75 years of U.S.-based tooling production with long-standing traditions of quality and innovation.

Walter USA, LLC
N22 W23855 Ridgeview Pkwy West
Waukesha, WI 53188
800.945.5554
www.walter-tools.com/us