Literature & Websites

Press Release Summary:

Oct 25, 2006 - ROSSLYN, VA, October 17, 2006-The National Electrical Manufacturers Association (NEMA), on behalf of the American National Standard Lighting Group (ANSLG) has published ANSI_ANSLG C81.62-2006, American National Standard for Electric Lampholders. This standard sets forth the specifications for lampholders for electric lamps. The 2006 edition of ANSI_ANSLG C81.62 is issued to include, first, a reference to all IEC base (cap) standard sheets adopted as American National Standards (ANS). Second, standard sheets for a small number of bases, used mainly in North America that are not harmonized with IEC, are found in Part II. Part III contains any U.S. deviations to the IEC standard sheets, which have been adopted as Nationally Acknowledged International Standards that are published in IEC 60061-1. Part IV contains an informative annex on first versus third angle projection and related standards. Because this standard is under continuous accreditation maintenance, the following are the changes of record in the 2006 edition: 1) SX4s/4 Flanged CAPS: ANS Standard Sheets 1-850-1 is superseded with IEC Standard Sheets 7004-97-2. Description: "Submidget flanged base for subminiature lamps." 2) PGJ19 CAPS for the H8B, H9B, and H11B Lamps: Adopted IEC Standard Sheet 7004- 146-1. 3) W(X)(Y)3x16q BASE: IEC Standard Sheets 7004-106-3 supersedes IEC Standard Sheet 7004-106-2. Description: "Red Double Filament Lamps Base." 4) GX8.5 BASE: USA adopted IEC Standard Sheets 7004-143-1. 5) GX10 BASE: USA adopted IEC Standard Sheets 7004-144-1. This description is provided by the staff of the ANSLG that directs and administers the expert work groups of the Accredited Standards Committee "C81" on Electric Lamps. ANSI_ANSLG C81.62-2006 may be downloaded free or a hardcopy purchased for $220.00 by visiting NEMA's website at http://www.nema.org/stds/c81-62.cfm, or by contacting IHS at (800) 854-7179 (within the U.S.), (303) 397-7956 (international), (303) 397-2740 (fax), or on the Internet at http://global.ihs.com. NEMA is the trade association of choice for the electrical manufacturing industry. Founded in 1926 and headquartered near Washington, D.C., its 430 member companies manufacture products used in the generation, transmission and distribution, control, and end-use of electricity. These products are used in utility, medical imaging, industrial, commercial, institutional, and residential applications. Domestic production of electrical products sold worldwide exceeds $120 billion. In addition to its headquarters in Rosslyn, Virginia, NEMA also has offices in Beijing, São Paulo, and Mexico City. Diane Davis (703) 841-3222 dia_davis@nema.org

National Electrical Manufacturers Association (NEMA) - Rosslyn, VA

Original Press Release

NEMA Publishes ANSI_ANSLG C81.62-2006, American National Standard For Electric Lampholders

Press release date: Oct 17, 2006

ROSSLYN, VA, October 17, 2006-The National Electrical Manufacturers Association (NEMA), on behalf of the American National Standard Lighting Group (ANSLG) has published ANSI_ANSLG C81.62-2006, American National Standard for Electric Lampholders. This standard sets forth the specifications for lampholders for electric lamps.

The 2006 edition of ANSI_ANSLG C81.62 is issued to include, first, a reference to all IEC base (cap) standard sheets adopted as American National Standards (ANS). Second, standard sheets for a small number of bases, used mainly in North America that are not harmonized with IEC, are found in Part II. Part III contains any U.S. deviations to the IEC standard sheets, which have been adopted as Nationally Acknowledged International Standards that are published in IEC 60061-1. Part IV contains an informative annex on first versus third angle projection and related standards. Because this standard is under continuous accreditation maintenance, the following are the changes of record in the 2006 edition:

1) SX4s/4 Flanged CAPS: ANS Standard Sheets 1-850-1 is superseded with IEC Standard Sheets 7004-97-2. Description: "Submidget flanged base for subminiature lamps."

2) PGJ19 CAPS for the H8B, H9B, and H11B Lamps: Adopted IEC Standard Sheet 7004- 146-1.

3) W(X)(Y)3x16q BASE: IEC Standard Sheets 7004-106-3 supersedes IEC Standard Sheet 7004-106-2. Description: "Red Double Filament Lamps Base."

4) GX8.5 BASE: USA adopted IEC Standard Sheets 7004-143-1.

5) GX10 BASE: USA adopted IEC Standard Sheets 7004-144-1.

This description is provided by the staff of the ANSLG that directs and administers the expert work groups of the Accredited Standards Committee "C81" on Electric Lamps.

ANSI_ANSLG C81.62-2006 may be downloaded free or a hardcopy purchased for $220.00 by visiting NEMA's website at www.nema.org/stds/c81-62.cfm, or by contacting IHS at (800) 854-7179 (within the U.S.), (303) 397-7956 (international), (303) 397-2740 (fax), or on the Internet at global.ihs.com.

NEMA is the trade association of choice for the electrical manufacturing industry. Founded in 1926 and headquartered near Washington, D.C., its 430 member companies manufacture products used in the generation, transmission and distribution, control, and end-use of electricity. These products are used in utility, medical imaging, industrial, commercial, institutional, and residential applications. Domestic production of electrical products sold worldwide exceeds $120 billion. In addition to its headquarters in Rosslyn, Virginia, NEMA also has offices in Beijing, São Paulo, and Mexico City.

Diane Davis (703) 841-3222 dia_davis@nema.org