Legrand® Shows Why Its Products Are a Sure Bet at NECA 2012

Booth 1943 to entertain and educate audience using Texas Hold 'Em Poker

Las Vegas, NV. - Legrand, the global specialist in products and systems for electrical installations and information systems will be showing why their ranges of products are a sure bet that provide all users with a competitive edge at NECA 2012.

Booth 1943 will be themed around Texas Hold 'Em poker and will feature Cablofil®, Pass & Seymour® and Wiremold® product ranges. "These innovative Legrand product ranges help contractors be more productive, competitive and profitable by getting them off one jobsite quickly and onto the next. In addition, the specialized functionality of the various products also helps contractors develop and take advantage of new business opportunities," said Steve Killius, Vice President, Contractor Resource Group.

On the show floor, Cablofil, Pass & Seymour and Wiremold products will be grouped around alternative energy, productivity and lighting controls and energy management.


Six products will be featured that help contractors become more productive. These include Wiremold Walkerflex® Modular Wiring System, a factory-assembled, pre-manufactured connector and cable set system. It has a plug-and-play feature, provides tremendous wire management flexibility and labor savings compared to traditional pipe and box wiring methods. Wiremold Tele-Power® Pole (TPP) Extenders allow contractors to extend the length of an existing pole and Wiremold Tele-Power Express Poles give contractors the ability to rapidly snap together 5-foot sections to create a complete pole. The configurability of the TPP Extender and Express Pole allows for immediate on-site modifications to accommodate a variety of ceiling heights.

Pass & Seymour PlugTail(TM) wiring devices drive productivity at rough-in and can be installed in less than a minute, which makes installation three times faster than conventional device installation.

Pass & Seymour Titan(TM) Dimmers help save energy and offer a complete on-site wall plate solution that saves time and money and offers end-users, contractors and specifiers a superior, more convenient, better looking multi-gang installation.

Cablofil Plexo Twist-on junction boxes can be attached to the sides, bottom or corner of any CF series Cablofil tray without any hardware, with just a 45° twist. It is available in two sizes, is self-extinguishing and has excellent impact resistance.

Cablofil FAS Power(TM) prefabricated wiring assemblies save at least 50% of labor costs on the job site and significantly cut the completion time of a project.

Alternative Energy

Pass & Seymour Electric Vehicle Chargers include a Level 1 Portable EV Charger that is perfect for busy users who want to charge their electric vehicles on the road. Level 2 EV Chargers include wall-mounted versions for residential charging and single and dual pedestal-mounted charging stations for light commercial applications.

Legrand Delta Strut(TM) is a uniquely designed support structure for rooftop solar applications. It is maintenance free, can support utility grade solar panels in winds of up to 150 mph and under extreme snow loads. The cable pathway is kept close to the panels resulting in cables being protected from direct sunlight and wind damage.

Legrand Universal Solar Supports are designed for easy installation and to facilitate overall cost reduction. These components and others can be combined for a custom PV support system.

New Business Opportunities

Wiremold Overfloor Raceway System (OFR) is easy to install and mounts directly to a floor covering, including wood, tile or carpet. It is tamper resistant, contains multiple transition options, and is an open system that accepts a wide range of communication and A/V devices.

The Wiremold Evolution(TM) Series Floor Box can be installed in wood, concrete, or raised floors. It installs with ease either before or after the floor covering has been put down and is fully adjustable pre- and post-concrete pour.

Also on the show floor will be Cablofil Wire Mesh Cable Tray which is made from high-quality, precision-engineered welded steel wire. It is used in a wide array of applications ranging from heavy power cable pathways on oil rigs to data installations above the ceilings of modern office buildings across the country.

Lighting Controls

Pass & Seymour Sensors help cut energy consumption and are available in a multitude of styles and colors for both residential and commercial use. They comply with appropriate regulations and are quick and easy to install.

Pass & Seymour Harmony(TM) Universal Dimmers featuring Ready-Set Bulb-Calibration Technology (Harmony Universal Dimmer) will also be on the show floor. This unique dimmer is able to automatically sense the load of a bulb and is compatible with all bulb types. It also comes with three interchangeable face colors included in each package and works in both Single Pole and 3-Way applications.

For more information please visit http://www.legrand.us/neca-2012.aspx

About Legrand

Legrand is the global specialist in electrical and digital building infrastructures. Its comprehensive offering of solutions for use in commercial, industrial and residential markets makes it a benchmark for customers worldwide. Named to Forbes' 2011 list of the 100 Most Innovative Companies, Legrand believes innovation for a steady flow of new products with high added value is a prime vector for growth. Legrand reported sales of $5.7 billion in 2010. Legrand has a strong presence in the North American market, with a portfolio of well-known product lines that include Cablofil, Electrorack, On-Q, Ortronics, Pass & Seymour, Vantage, Watt Stopper and Wiremold. The company is listed on NYSE Euronext and is a component stock of indexes including the SBF120, FTSE4Good, MSCI World, ASPI. In 2010, Legrand was added to the European DJSI as well (ISIN code FR0010307819).


More from Agricultural & Farming Products

All Topics