BOP Handling Equipment - CE Marked and Atex Certified - of Course
Share:
A land based rig incorporating J D Neuhaus handling equipment has been supplied by National Oilwell Varco - Dreco Energy Services ULC. This was delivered in late summer this year to United Oilfield Services, and the BOP handling equipment supplied with this contract comprised two J D Neuhaus Profi 20 Ti-H hoists, each equipped with overhead rail mounting motorized trolleys to provide individual 20 ton lift capacities. A requirement of this handling equipment was that it should be CE marked and ATEX certified.
JDN hoists are all manufactured according to current design specifications and standards contained in:
· Machine Directive 98/3, 94/9CE (ATEX), EN14492-2, EN13463-1
· Relevant section of ANSI/B30.16
· API 7K
Each hoist is tested with 25% overload and certified accordingly. JDN lifting and handling equipment is also in use on Jack-Up rigs, Semi-Submersibles, Drill Ships and FPSO's.
The Profi range of hoists manufactured by JDN can be supplied to cover individual lift capacities from 0.25 up to a full 100 tons. They can be either air or hydraulically powered, and this equipment was specified as hydraulic as there was an existing power source for this on site. Individual hoists can also be supplied with trolleys which can provide for manual, reel chain or motorized lateral movements of hoists along their overhead support beam.
The hoists benefit from a compact all-steel cast iron construction with true vertical lifts, and also incorporate integrated overload protection systems on hoists of 1 ton capacity and upwards. They feature a 5:1 safety factor and 3:1 tensile strength, together with full traceability by a JDN unique parts marking system. A self adjusting fail-safe brake is incorporated, together with adjustable overload of 90 - 125%, while the equipment is also explosion proof and spark resistant. Highly efficient performance and reliability is provided with high lift/lower speeds and low sound emissions. This is combined with 100% duty rating - i.e. no downtime, based upon a modern design with lube-free operation and minimum maintenance requirements. An integrated emergency stop is incorporated in the main power supply for hoists up to 20 ton capacity, and all units are insensitive to dust, humidity and otherwise adverse or hazardous operating conditions.
Standard features include:
· Ex-classification: Ex II 2 GD IIA T4/Ex II 3 GD IIB T4
· Temperature range: -20°C to +70°C
· ISO/FEM rating hoist: M3 (1 Bm)
· ISO/FEM rating chain: M3 (1 Bm)
· Trolleys with anti-drop and anti-climb devices
· Worldwide service
Further information is available on request to:
J D Neuhaus L.P.
9 Loveton Circle
MD 21152 Sparks, USA
Contact:
Peggy Weber
e-mail: p.weber@jdneuhaus.com
Office Phone: 1-888- NEUHAUS
www.jdngroup.com
Worldwide contact details for J D Neuhaus can be seen at the end of this press release.
Press Release No: JDN80
Reader response inquiries to: Ms Peggy Weber of J D Neuhaus L.P.
Our Reference: JDN80/12/12/V2
Typical J D Neuhaus Profi 20 Ti-H hydraulically operated hoist, part of a two hoist BOP handling unit supplied with a land based rig delivered recently.
Company information
J D Neuhaus are a privately-owned company, founded in 1745, and for over 265 years they have been using their expertise and experience to manufacture the highest quality hoists, winches and cranes.
Their products offer solutions to almost every material handling problem irrespective of the driving medium: from air, manual and hydraulic hoists up to complete crane installations with explosion proofness.
JDN products are used in a wide variety of industries including:
Airplane Yards; Atomic/Coal Power Stations; Big Bag Handling; Cement Industry; Chemical Industry;
Crane Manufacturers; Dairies; Food Industry; Foundries; Galvanization; Glass/Ceramics; Large Kitchens;
Leather Plants; Locks; Machine and Plant Construction; Mining; Motor Car Industry; Offshore/Onshore;
Oil Storage; Over/Underground Construction; Paints and Varnish; Painting and Coating Installations;
Paper Industry; Pharmaceutical Industry; Printing Industry; Pyrotechnics Industries;
Refineries; Sawmills; Shipbuilding and Shiprepair Yards; Ships; Space Technique; Spray Booths; Steel Works; Surface Technique; Tank Cleaning Devices; Textile Industry; Tunnel; Tire Manufacturers; Vacuum Technique
Contact J D Neuhaus
J D Neuhaus are represented in more than 90 countries and over 70 branches Worldwide.
Germany
J D Neuhaus GmbH & Co. KG
58449 Witten-Heven, Germany
Tel: +49 2302 208-219
Fax: +49 2302 208-286
e-mail: info@jdngroup.com
www.jdngroup.com
France
J D Neuhaus S.A.R.L.
24 rue du Président Krüger
9008 Lyon, France
Tel: 0033-4-3790-1745
Fax: 0033-4-3790-1746
e-mail: info@jdneuhaus.fr
www.jdngroup.com
Great Britain
J D Neuhaus Ltd
Unit 6 Kirkton Avenue
Pitmedden Road Industrial Estate
Dyce, Aberdeen, AB21 0BF, UK
Tel: 0044-1224-722751
Fax: 0044-1224-729895
e-mail: info@jdneuhaus.co.uk
www.jdngroup.com
Singapore
J.D. Neuhaus Pte. Ltd
21 Toh Guan Road East
#09-02 Toh Guan Centre
Singapore, n608609
Tel: +65-62758911
Fax: +65-62758922
e-mail: info@jdn.com.sg
www.jdngroup.com
USA
J.D. Neuhaus L.P.
9 Loveton Circle
MD 21152 Sparks, USA
Tel: 001-410-472 0500
Fax: 001-410-472-2202
e-mail: info@jdneuhaus.com
www.jdngroup.com
China
J.D. Neuhaus Pte Ltd Shanghai
333 Tianyaoqiao Road
26-07B Ascendas Plaza
Shanghai 200030
Shanghai, China
Tel: +86-021-6426 4670
Fax: +86-021-6121 3669
e-mail: infocn@jdn.com.sg
www.jdngroup.com
