Company News

NewAge® Industries Achieves Landfill-Free Status

Aug 31, 2017

All Waste is Recycled or Used in Energy Recovery Systems

Southampton, Pa. - NewAge Industries is proud to announce that it is now a zero-waste organization. All of the tubing manufacturer’s waste is reused, recycled or disposed of by combustion at a local EfW (Energy from Waste) facility.

“This has been a goal of ours as part of our sustainability program,” noted Ken Baker,... Read More

HTI Serves as Test Site for All-Electric Molding Machine

Aug 31, 2017

HTI Plastics was selected by Krauss Maffei as a beta test site for their new PX all-electric injection molding machine. The PX all-electric was introduced in the fourth quarter of 2016. HTI will act as a host site for the machine for a year and have the option to purchase the machine after acting as a test site.

In 2010, HTI Plastics introduced electric mold machines into its production... Read More

HTI Plastics Purchases Melt-Flow Indexer

Aug 31, 2017

HTI Plastics is dedicated to continuous improvements and to stay on the cutting edge of the latest technologies and equipment. As part of this dedication HTI has recently purchased a new Melt Flow Indexer. The melt flow indexer will be used for incoming inspection, process development and troubleshooting.

“The new melt flow indexer is as state-of-the-art and top of the line as we can... Read More

Monroe Electronics and Layered Solutions Join Forces for Broader-Reaching Emergency Messaging

Aug 31, 2017

LYNDONVILLE, N.Y. - Aug. 30, 2017 - Monroe Electronics and its Digital Alert Systems subsidiary, the global leaders in emergency communications solutions for video services providers, today announced a technology partnership with emergency management solutions provider Layered Solutions Inc. Layered Solutions supports education, healthcare, commercial, industrial, and government facilities in... Read More

Aeroblaze Receives Initial Nadcap Accreditation

Aug 31, 2017

Nadcap recognizes Aeroblaze for its commitment to continual improvement in aerospace quality

FORT WORTH, TX, August 30 – Aeroblaze Laboratory announced that it has received Nadcap accreditation for Non-Metallic Material Testing (NMMT) after successfully passing a Nadcap audit for flammability testing.

Nadcap is an industry-managed program developed by technical experts from... Read More

Nationwide Boiler Becomes Exclusive Representative of B&W MEGTEC Products

Aug 30, 2017

Fremont, California, August 29, 2017 - Nationwide Boiler Inc., leading supplier of SCR systems for 2½ ppm NOx on package boilers, has signed a formal agreement to represent the Babcock & Wilcox (B&W) line of MEGTEC environmental equipment. The exclusive agreement encompasses the entire state of California and eastern Nevada, and includes the new installation of field erected emissions control... Read More

Light & Color Measurement Seminars Provide Education on Photometric Principles and Technology

Aug 30, 2017

REDMOND, Wash. - August 29, 2017 - Radiant Vision Systems, a leading provider of visual test and inspection systems for light sources and displays, offers education on photometric light measurement through a series of live, half-day seminars taking place throughout Fall 2017. “Light & Color Measurement” Seminars are led by Radiant’s team of light and color measurement experts, and... Read More

Ensinger Precision Components Will Be Attending the Design2part Show on September 27th & 28th in Marlborough, MA

Aug 30, 2017

Engineering Capabilities

Ensinger PC's belief is that the best method to ensure product quality is to design quality into the product and service from the start.

Our engineering department has many years of experience in mold design and construction as well as material selection. We pride ourselves on early vendor involvement and concurrent engineering. We are working with... Read More

Carestream Contract Manufacturing to Display Custom Coating and Development Capabilities at The Battery Show

Aug 30, 2017

WHO: Carestream Contract Manufacturing is a proven provider of roll-to-roll precision coating services and products for advanced materials applications.

WHAT: Carestream will showcase its contract coating services for the battery, fuel cell and capacitor markets at The Battery Show. Carestream helps customers develop, commercially scale up and manufacture battery components such as... Read More

Upcoming Events Focus on Heat Treatment Trends, Technology & Training

Aug 30, 2017

CHERRY VALLEY, IL – Fall 2017 is slated to be full of events that focus on heat treatment trends, technology and training. As you prepare to hone your skills and expand your areas of expertise, here are a few items you should add to your calendar:

October 3-5, Ipsen U (with special atmosphere session)

Hosted at Ipsen’s facility in Cherry Valley, Illinois, Ipsen U courses... Read More

Steel of America Trading Corporation Charity Works

Aug 30, 2017

Here at Steel of America our thoughts and prayers go out to all of those effected in Texas and Louisiana, by the wind and rains, of Hurricane Harvey. We invite you to join us, here at Steel of America in donating to any of the great charities and relief organizations like the Red Cross.

Steel of America Trading Corporation

1507 Governor Ritchie Highway, Suite 207

Arnold,... Read More

Aerotech Expands our Capabilities with a Dedicated Building in Germany

Aug 29, 2017

On March 2, 2016 Aerotech celebrated the groundbreaking for our new Aerotech Germany office in Fürth, Germany. Construction and relocation to the new building has been completed and the opening ceremony was held on May 18th, 2017.

According to Norbert Ludwig, the Managing Director of Aerotech Germany, "We had approximately 40 participants from outside [Aerotech] plus 20 Aerotech... Read More

Infiana Exhibits at CAMX 2017

Aug 29, 2017

Specialty Films Manufacturer Continues to Grow its Presence in North America

Malvern - Infiana joins CAMX 2017, the “Composites and Advanced Material Expo“, as a first-time exhibitor this year. This leading industry event takes place in Orlando, Florida from September 11th to 14th. The specialty films manufacturer can be found at Station NES4 in the Innovation Park New Exhibitor... Read More

2017 Business Longevity Awards

Aug 26, 2017

This year’s Business Longevity Award honorees are proof that hard work and a commitment to excellence can pay off. These 44 companies were built on timeless values and principles that set the stage for generations of economic achievement.

Some of these businesses have recognizable brand names that are imbedded in the communities they call home. Others have maintained a low profile... Read More

Project Vulcan

Aug 25, 2017

Lawrence, MA, August 24, 2017: Rubix LS is pleased to announce a breakthrough in the ability to sense trace levels of organic compounds. The proprietary sensor technology results in extremely compact, high sensitivity devices that exhibit a high level of reliability and structural resilience.

Rubix LS founder and CEO, Reggie Swift, comments “With this technology we are able to produce... Read More

Validating Additive Manufactured Parts with Industrial CT Scanning

Aug 25, 2017

Jesse Garant Metrology Center on the advantages of industrial CT for additive manufacturing

DEARBORN, MI – Aug 28, 2017 – While additive manufacturing provides many benefits, there can be high variability and increased risk of defects with 3D printed parts. As more industries are relying on this technology, ensuring quality in finished products will be crucial to winning the trust... Read More

Brady Unveils New Digital Enhancements

Aug 25, 2017

Brady leads with technology to improve and enhance the customer experience

MILWAUKEE, Wis. (August 24, 2017) - Brady (NYSE:BRC), a global leader in industrial and safety printing systems and solutions, announced today two major initiatives designed to transform the digital experience that customers have come to expect. The redesign of BradyID.com, as... Read More

Bassett Industries: Achieves ISO9001-2015 One Year Ahead of Schedule

Aug 23, 2017

Bassett Industries continues to lead the fabrication industry in quality by receiving ISO9001-2015 registration a year ahead of schedule, being one of the first in our industry to do so. By proactive offsite training and employing additional manpower, Bassett was able to move the timetable forward one full year. Using the latest technologies and our integrated companywide software package our... Read More

New State of the Art 5 Axis Laser Added to Bassett’s Arsenal of Laser Cutting Equipment

Aug 23, 2017

Bassett increases its tube & formed sheet laser cutting capabilities with its acquisition of a new 4000 watt, 5 Axis laser for processing formed sheet metal parts, assemblies and large tube sections with a 33.4” Z stroke, 122” x axis and 86.6” y axis, and 4,400 lbs work piece capacity. Bassett’s purchase of the 5 Axis allows for flexibility and post form trimming and feature additions... Read More

Bassett Increases Sheet Laser Cutting Capabilities and Efficiencies with a New 8kw 2 Meter x 4 Meter Fiber Sheet Laser

Aug 23, 2017

Bassett is proud to announce its acquisition of one first 8kw 4 meter x 2 meter fiber sheet lasers in the US. Bassett’s purchase of the new fiber laser affords speeds up to 4-5 times as fast as conventional CO2 lasers, as well as being able to cut metals such as aluminum, copper, and brass. In addition, nitrogen cutting can eliminate oxide edges on parts that have to be painted, thus... Read More