Sensor Products Inc.

Mining, Oil Drilling, Refining Products & Equipment

Sensor Products Inc. is Offering Fuji Prescale® Film for Contact Surface Pressure Measurement

Madison, NJ USA - Sensor Products Inc. is pleased to announce it is offering Fuji Prescale® pressure film. For more than 20 years Sensor Products Inc. has been a leader in the field of tactile pressure and force measurement. Sensor Product's films reveal pressures from 2 - 43,200 PSI (0.14 - 3,000 kg/cm2). Sensor Products is an official distributor of Fuji Prescale® in the U.S.A., Mexico,...

Read More »
Testing Material indicates mold face planarity.
Mining, Oil Drilling, Refining Products & Equipment

Testing Material indicates mold face planarity.

By minimizing flash, shorts, and burns, Mold-Align® surface pressure indicating material reduces defects in injection molding process. When placed between mold halves that are compressed together, material instantaneously changes color revealing how pressure is being distributed between mold faces. Mold-Align leaves no residue and enables user to distinguish between high and low pressure...

Read More »
Pressure Film ensures precise mating between mold halves.
Construction Equipment and Supplies

Pressure Film ensures precise mating between mold halves.

Mold-Align®, when placed between mold halves during injection molding, changes color to reveal how pressure is being distributed between A and B halves of mold. It is placed between platens on parting line which are then subjected to pressure upon clamp closing, using minimal clamp tonnage. After product is removed, image is inspected for pressure distribution and void spots. Product may be...

Read More »
Sensor Film aids quality control in solar module manufacture.
Optics & Photonics

Sensor Film aids quality control in solar module manufacture.

Revealing pressure magnitude and distribution between any two contacting or mating surfaces, from 2-43,000 psi, Mylar-based Pressurex® Sensor Film helps verify adequate frame-to-module edge sealing. Placed at interface of 2 contacting surfaces, film permanently captures force applied during lamination press by changing color. Film offers solution for quality control checks during equipment...

Read More »
Sensor Film characterizes contact pressure down to 7.2 psi.
Optics & Photonics

Sensor Film characterizes contact pressure down to 7.2 psi.

Featuring measuring range 7.2-28 psi, Pressurex Zero® tactile pressure-indicating sensor film can be placed between contacting/mating surfaces to instantly measure and map pressure magnitude and distribution. Variations in contact surface pressure are immediately visible by impression made on film. Available as thin clear plastic sheet, product conforms to curved spaces, and comes in 8...

Read More »
Construction Equipment and Supplies

Roll Alignment Tool provides electronic nip analysis.

Designed for converting and printing, Mini Sigma-Nip® measures nip widths of rolls with circumferences smaller than 20 in. Sensors capture data and record nip width readings while being viewed on laptop containing Windows-based software. Adjustments to load are made in real-time while sensors are in closed, non-rotating nip. Useful for continuous maintenance as well as during equipment...

Read More »
Laboratory and Research Supplies and Equipment

Fast and Accurate Sensor Film Maps Surface Pressure Distribution for Leading Load Cell Manufacturer

Pressurex® Ideal for Quality Control and Machine Component Inspection Madison, NJ (USA) - May 22, 2008 - Pressurex®, a thin flexible film from Sensor Products Inc., is a versatile NDT tool for quality control and machine component inspection. Its ability to easily and rapidly show inconsistencies in surface pressure between mating or contacting surfaces has lowered scrap rate and assisted...

Read More »
Optics & Photonics

Unique Tactile Pressure Indicating Sensor Film Aids Circuit Breaker Production

Madison, NJ (USA) - February 19, 2008 -- Sensor Products Inc. presents Pressurex®, a tactile pressure indicating sensor film that quickly and accurately maps and measures pressure distribution and magnitude between any mating or contacting surfaces. Recently a major manufacturer of circuit breakers searched for a mechanical method of checking contact alignment and surface pressure of a series...

Read More »
Unique Tactile Pressure-Indicating Sensor Film Helps Capacitor Manufacturer Hold Tighter Product Tolerances.
Optics & Photonics

Unique Tactile Pressure-Indicating Sensor Film Helps Capacitor Manufacturer Hold Tighter Product Tolerances.

Madison, NJ, (USA) - December 17, 2007 - As an innovator of film capacitor technology, SB Electronics designs and manufactures products that are on the cutting edge of today's demanding electronics applications. To maintain continuous improvement of its manufacturing processes, David Bryan, Manufacturing Engineering Manager for SB Electronics, recently specified Pressurex®, a tactile surface...

Read More »
Mining, Oil Drilling, Refining Products & Equipment

Sensor Products Inc. is Offering Fuji Prescale® Film for Contact Surface Pressure Measurement

Madison, NJ USA - Sensor Products Inc. is pleased to announce it is offering Fuji Prescale® pressure film. For more than 20 years Sensor Products Inc. has been a leader in the field of tactile pressure and force measurement. Sensor Product's films reveal pressures from 2 - 43,200 PSI (0.14 - 3,000 kg/cm2). Sensor Products is an official distributor of Fuji Prescale® in the U.S.A., Mexico,...

Read More »
Testing Material indicates mold face planarity.
Mining, Oil Drilling, Refining Products & Equipment

Testing Material indicates mold face planarity.

By minimizing flash, shorts, and burns, Mold-Align® surface pressure indicating material reduces defects in injection molding process. When placed between mold halves that are compressed together, material instantaneously changes color revealing how pressure is being distributed between mold faces. Mold-Align leaves no residue and enables user to distinguish between high and low pressure...

Read More »
Pressure Film ensures precise mating between mold halves.
Construction Equipment and Supplies

Pressure Film ensures precise mating between mold halves.

Mold-Align®, when placed between mold halves during injection molding, changes color to reveal how pressure is being distributed between A and B halves of mold. It is placed between platens on parting line which are then subjected to pressure upon clamp closing, using minimal clamp tonnage. After product is removed, image is inspected for pressure distribution and void spots. Product may be...

Read More »
Sensor Film aids quality control in solar module manufacture.
Optics & Photonics

Sensor Film aids quality control in solar module manufacture.

Revealing pressure magnitude and distribution between any two contacting or mating surfaces, from 2-43,000 psi, Mylar-based Pressurex® Sensor Film helps verify adequate frame-to-module edge sealing. Placed at interface of 2 contacting surfaces, film permanently captures force applied during lamination press by changing color. Film offers solution for quality control checks during equipment...

Read More »
Company News

2009 Fastening Technology and Bolted Joint Design Seminar Dates

Comprehensive Seminar Explores Science of Fastening and Mechanical Joining and Problem Solving Techniques Madison, NJ (USA) - February 26, 2009 - Seminars For Engineers, a division of Sensor Products Inc. USA, announces in association with Clemson Edupro Inc. the 2009 dates for its Fastening Technology and Bolted Joint Design seminar. March 24-25, 2009 Chicago, Illinois November 17-18, 2009...

Read More »
Sensor Film characterizes contact pressure down to 7.2 psi.
Optics & Photonics

Sensor Film characterizes contact pressure down to 7.2 psi.

Featuring measuring range 7.2-28 psi, Pressurex Zero® tactile pressure-indicating sensor film can be placed between contacting/mating surfaces to instantly measure and map pressure magnitude and distribution. Variations in contact surface pressure are immediately visible by impression made on film. Available as thin clear plastic sheet, product conforms to curved spaces, and comes in 8...

Read More »
Company News

2008 Fastening Technology and Bolted Joint Design Seminar Dates

Comprehensive Seminar Explores Science of Fastening and Mechanical Joining and Problem Solving Techniques Madison, NJ (USA) - September 19, 2008 - Seminars For Engineers, a division of Sensor Products Inc. USA, announces in association with Clemson Edupro Inc. a change of location to for the last 2008 Fastening Technology and Bolted Joint Design seminar. November 5-6, 2008 Chicago Il. This...

Read More »
Construction Equipment and Supplies

Roll Alignment Tool provides electronic nip analysis.

Designed for converting and printing, Mini Sigma-Nip® measures nip widths of rolls with circumferences smaller than 20 in. Sensors capture data and record nip width readings while being viewed on laptop containing Windows-based software. Adjustments to load are made in real-time while sensors are in closed, non-rotating nip. Useful for continuous maintenance as well as during equipment...

Read More »
Company News

Composite Materials Failure, Analysis & Repair Seminar to Be Held July 23-24 in Chicago, IL USA

Comprehensive Seminar Examines Failure Scenarios in Design / Performance and Repair Methods and Technologies Madison, NJ USA - June 16, 2008 - Seminars For Engineers USA, a division of Sensor Products Inc. USA, announces in association with BTG Composites LLC its 2008 Composite Materials Failure, Analysis & Repair seminar. The dates and location for the Composites Materials Seminars is July...

Read More »

All Topics