Woodex Bearing Company, Inc.

Mechanical Components and Assemblies

Shaft Seals are designed for screw conveyors.

HB Model seals are offered in 5 CEMA and 7 metric shaft sizes from 1-½-3 7/16 in. and from 40-90 mm. They are designed to perform in typical operating conditions associated with screw conveyors or scrolls in food-grade applications, at temperatures up to 500ºF, with abrasive products, and on vertical or inclined conveyors. HB accommodates up to ¼ in. of shaft run-out.

Read More »
Mechanical Components and Assemblies

Shaft Seals are designed for screw conveyors.

HB Model seals are offered in 5 CEMA and 7 metric shaft sizes from 1Â-½-3 7/16 in. and from 40-90 mm. They are designed to perform in typical operating conditions associated with screw conveyors or scrolls in food-grade applications, at temperatures up to 500ºF, with abrasive products, and on vertical or inclined conveyors. HB accommodates up to ¼ in. of shaft run-out.

Read More »
Seal is suited for use with airlocks and rotary valves.
Mechanical Components and Assemblies

Seal is suited for use with airlocks and rotary valves.

Designed to solve problems posed by airlocks and rotary valves, MECO-PAC fits inside stuffing box, replacing packing, and is adjusted with original packing gland follower. Able to be installed without equipment modification, product provides years of leak-free operation with minimal, if any, maintenance. Product is custom-engineered for service with products varying from foods and abrasives to...

Read More »
Seal is suited for use with airlocks and rotary valves.
Mechanical Components and Assemblies

Seal is suited for use with airlocks and rotary valves.

Designed to solve problems posed by airlocks and rotary valves, MECO-PAC fits inside stuffing box, replacing packing, and is adjusted with original packing gland follower. Able to be installed without equipment modification, product provides years of leak-free operation with minimal, if any, maintenance. Product is custom-engineered for service with products varying from foods and abrasives to...

Read More »
Split Seals are suitable for hostile processes.
Mechanical Components and Assemblies

Split Seals are suitable for hostile processes.

March 10, 2003- Georgetown, Maine: MECO's patented EX-PAC model seals are built to withstand some of industry's least hospitable environments. These include aggressive solvents and other chemicals, temperatures up to 500°F, thermal shaft growth, pressure fluctuations, high shaft runout and slight axial motion. Available with either elastomeric or mechanical drive mechanisms, the EX-PAC shares...

Read More »
Split Seals are suitable for hostile processes.
Mechanical Components and Assemblies

Split Seals are suitable for hostile processes.

March 10, 2003- Georgetown, Maine: MECO's patented EX-PAC model seals are built to withstand some of industry's least hospitable environments. These include aggressive solvents and other chemicals, temperatures up to 500-°F, thermal shaft growth, pressure fluctuations, high shaft runout and slight axial motion. Available with either elastomeric or mechanical drive mechanisms, the EX-PAC shares...

Read More »
Custom Shaft Seals fit rotating equipment.
Mechanical Components and Assemblies

Custom Shaft Seals fit rotating equipment.

Engineered to suit individual applications, seals are available either partially or fully-split to speed installation and rebuilding. Seals can retrofit rotating dry powder and bulk solids processing equipment such as mixers, bucket elevators, agitators, dryers, and extruders with shaft diameters from 1/2 to 36 in. Seal materials include specialty and hardened alloys, exotic bearing grade...

Read More »
Custom Shaft Seals fit rotating equipment.
Mechanical Components and Assemblies

Custom Shaft Seals fit rotating equipment.

Engineered to suit individual applications, seals are available either partially or fully-split to speed installation and rebuilding. Seals can retrofit rotating dry powder and bulk solids processing equipment such as mixers, bucket elevators, agitators, dryers, and extruders with shaft diameters from 1/2 to 36 in. Seal materials include specialty and hardened alloys, exotic bearing grade...

Read More »
Shaft Seals are available split or unsplit.
Mechanical Components and Assemblies

Shaft Seals are available split or unsplit.

AH Series employs elastomeric drive design to protect shaft from abrasion damage and to accommodate 1/4 in. radial shaft runout. Seals are fitted with flush water inlet and drain ports for in-place cleanouts. They incorporate adjustment mechanism and monitoring provisions, allowing operator to perform preventive maintenance before leakage occurs. Seals are used on ribbon blenders, paddle mixers,...

Read More »
Shaft Seals are available split or unsplit.
Mechanical Components and Assemblies

Shaft Seals are available split or unsplit.

AH Series employs elastomeric drive design to protect shaft from abrasion damage and to accommodate 1/4 in. radial shaft runout. Seals are fitted with flush water inlet and drain ports for in-place cleanouts. They incorporate adjustment mechanism and monitoring provisions, allowing operator to perform preventive maintenance before leakage occurs. Seals are used on ribbon blenders, paddle mixers,...

Read More »
Mechanical Components and Assemblies

Shaft Seals are designed for screw conveyors.

HB Model seals are offered in 5 CEMA and 7 metric shaft sizes from 1-½-3 7/16 in. and from 40-90 mm. They are designed to perform in typical operating conditions associated with screw conveyors or scrolls in food-grade applications, at temperatures up to 500ºF, with abrasive products, and on vertical or inclined conveyors. HB accommodates up to ¼ in. of shaft run-out.

Read More »
Mechanical Components and Assemblies

Shaft Seals are designed for screw conveyors.

HB Model seals are offered in 5 CEMA and 7 metric shaft sizes from 1Â-½-3 7/16 in. and from 40-90 mm. They are designed to perform in typical operating conditions associated with screw conveyors or scrolls in food-grade applications, at temperatures up to 500ºF, with abrasive products, and on vertical or inclined conveyors. HB accommodates up to ¼ in. of shaft run-out.

Read More »
Seal is suited for use with airlocks and rotary valves.
Mechanical Components and Assemblies

Seal is suited for use with airlocks and rotary valves.

Designed to solve problems posed by airlocks and rotary valves, MECO-PAC fits inside stuffing box, replacing packing, and is adjusted with original packing gland follower. Able to be installed without equipment modification, product provides years of leak-free operation with minimal, if any, maintenance. Product is custom-engineered for service with products varying from foods and abrasives to...

Read More »
Seal is suited for use with airlocks and rotary valves.
Mechanical Components and Assemblies

Seal is suited for use with airlocks and rotary valves.

Designed to solve problems posed by airlocks and rotary valves, MECO-PAC fits inside stuffing box, replacing packing, and is adjusted with original packing gland follower. Able to be installed without equipment modification, product provides years of leak-free operation with minimal, if any, maintenance. Product is custom-engineered for service with products varying from foods and abrasives to...

Read More »
Split Seals are suitable for hostile processes.
Mechanical Components and Assemblies

Split Seals are suitable for hostile processes.

March 10, 2003- Georgetown, Maine: MECO's patented EX-PAC model seals are built to withstand some of industry's least hospitable environments. These include aggressive solvents and other chemicals, temperatures up to 500°F, thermal shaft growth, pressure fluctuations, high shaft runout and slight axial motion. Available with either elastomeric or mechanical drive mechanisms, the EX-PAC shares...

Read More »
Split Seals are suitable for hostile processes.
Mechanical Components and Assemblies

Split Seals are suitable for hostile processes.

March 10, 2003- Georgetown, Maine: MECO's patented EX-PAC model seals are built to withstand some of industry's least hospitable environments. These include aggressive solvents and other chemicals, temperatures up to 500-°F, thermal shaft growth, pressure fluctuations, high shaft runout and slight axial motion. Available with either elastomeric or mechanical drive mechanisms, the EX-PAC shares...

Read More »
Custom Shaft Seals fit rotating equipment.
Mechanical Components and Assemblies

Custom Shaft Seals fit rotating equipment.

Engineered to suit individual applications, seals are available either partially or fully-split to speed installation and rebuilding. Seals can retrofit rotating dry powder and bulk solids processing equipment such as mixers, bucket elevators, agitators, dryers, and extruders with shaft diameters from 1/2 to 36 in. Seal materials include specialty and hardened alloys, exotic bearing grade...

Read More »
Custom Shaft Seals fit rotating equipment.
Mechanical Components and Assemblies

Custom Shaft Seals fit rotating equipment.

Engineered to suit individual applications, seals are available either partially or fully-split to speed installation and rebuilding. Seals can retrofit rotating dry powder and bulk solids processing equipment such as mixers, bucket elevators, agitators, dryers, and extruders with shaft diameters from 1/2 to 36 in. Seal materials include specialty and hardened alloys, exotic bearing grade...

Read More »
Shaft Seals are available split or unsplit.
Mechanical Components and Assemblies

Shaft Seals are available split or unsplit.

AH Series employs elastomeric drive design to protect shaft from abrasion damage and to accommodate 1/4 in. radial shaft runout. Seals are fitted with flush water inlet and drain ports for in-place cleanouts. They incorporate adjustment mechanism and monitoring provisions, allowing operator to perform preventive maintenance before leakage occurs. Seals are used on ribbon blenders, paddle mixers,...

Read More »
Shaft Seals are available split or unsplit.
Mechanical Components and Assemblies

Shaft Seals are available split or unsplit.

AH Series employs elastomeric drive design to protect shaft from abrasion damage and to accommodate 1/4 in. radial shaft runout. Seals are fitted with flush water inlet and drain ports for in-place cleanouts. They incorporate adjustment mechanism and monitoring provisions, allowing operator to perform preventive maintenance before leakage occurs. Seals are used on ribbon blenders, paddle mixers,...

Read More »

All Topics