Parker-TexLoc

NEW, Fluoropolymer Etched Tubing Increases Shelf By 20%
Fluid & Gas Flow Equipment

NEW, Fluoropolymer Etched Tubing Increases Shelf By 20%

Ft. Worth, TX - Nov13, 2007 - Parker-TexLoc now offers etched Fluoropolymer tubing with 50% more shelf life than conventional etched products and a 20% higher dyne rating. The added strength that lengthens the shelf life also strengthens the intensity of the etch, thus creating a stronger bond when fused to other objects. Typically, the improved Fluoropolymer Etched Tubing, made to Parker TexLoc...

Read More »
Fluoroplastic Paratubing handles multiple fluid lines.
Electrical Equipment & Systems

Fluoroplastic Paratubing handles multiple fluid lines.

Fluoroplastic Paratubing consists of 2-4 tubes longitudinally thermally welded, creating single conduit consisting of multiple individual tubes. It enables OEMs to run several fluid lines as one entity and then split tubes apart for branching to different connectors when needed. Available in chemically inert and non-leaching Texflour(TM) FEP and PFA with non-stick surface, tube is offered in...

Read More »
Fluid & Gas Flow Equipment

PFA Tubing targets semiconductor industry.

Designed for chemical lines, acid lines used in wet benches, and CMP process equipment, Low Permeation PFA Tubing is also suited for any industry where permeation affects purity of process chemicals. It protects against permeation and oxidation, minimizing premature failure of tubing and foul purity of chemical or process media inside tube. PFA Tubing is available in standard sizes as small as...

Read More »
Fluoropolymer Tubing distinguishes one line from another.
Fluid & Gas Flow Equipment

Fluoropolymer Tubing distinguishes one line from another.

Designed with colored stripe down entire length, Colortrax(TM) Tubing provides instant, positive identification of lines without obstructing view of media. Colortrax(TM) bonds fluoropolymer to fluoropolymer, providing resistance to rub-off, chemical attack, and heat deterioration. Pigmented fluoropolymer is confined to tubing's outer wall, avoiding risk of contaminating fluids inside. Available...

Read More »
Fluid & Gas Flow Equipment

FEP Heat Shrink for Instruments

A full line of Texflour(TM) FEP Heat Shrinkable Tubing is offered in a variety of expansion ratio's from Parker-TexLoc of Ft. Worth, Texas. TEXfluor® FEP heat shrinks operate in temperatures as high as 400°F (204°C) and is ideal for covering medical instruments, thermometers, lighting fixtures and other instruments where protection is needed. Most standard products are supplied with a...

Read More »
Fluoroplastic Paratubing provides chemical resistance.
Fluid & Gas Flow Equipment

Fluoroplastic Paratubing provides chemical resistance.

Offered in sizes as small as .031 in. ID x .030 wall up to 3 in. OD, Fluoroplastic Tubing comes in Texflour(TM) FEP and PFA, and consists of 2-4 tubes longitudinally thermally welded, creating one conduit consisting of multiple individual tubes. Materials offer non-stick surface, are chemically inert and non-leaching. Paratubing offers ability to run several fluid lines as one entity and then...

Read More »
Fluid & Gas Flow Equipment

Fluoroplastic Tubing suits fluid handling applications.

Precision Fluoroplastic Tubing is extruded from Texfluor(TM) PTFE, FEP, PFA, ETFE, and ECTFE in sizes from 1/8-4 in. ID in capillary, convoluted, and corrugated styles. Capable of operating continuously up to 500°F, depending upon material and configuration, tubing is available with wire-wrap reinforcement, cuffs or no cuffs, flares, and fittings. It is chemically inert, non-wetting, and...

Read More »
Fluid & Gas Flow Equipment

Heat Shrink Tubing features dual-layer construction.

Constructed with outer layer of TEXfluor® PTFE Heat Shrink and inner layer of TEXfluor® FEP tubing, Texflour(TM) Fluoropolymer Double Shrink Heat Shrinkable Tubing creates waterproof protective covering for parts. It can also be used to repair electrical wiring, fittings, cords and other objects that need to be protected from heat, dust, or corrosion. Product is offered in sizes...

Read More »
Fluid & Gas Flow Equipment

Fluoroplastic Tubing eliminates static charges.

Conforming to AMS-H-27267, PTFE Tubing is offered with conductive ID featuring minimum conductance of 10-20 Â-µA with 1,000 Vdc applied over 14 in. length. It eliminates static charges affecting combustible fluid transfer and prevents static build-up. Supplied sizes from 1/8-4 in. ID, tubing can be configured as smoothbore tubing, liners, and in convoluted and wire-wrapped convoluted styles....

Read More »

Profiles and Shapes are FDA/USP Class VI compliant.

Custom TexFluor(TM) PTFE Shapes are offered in D, J, S, U, X, and other configurations, from .020-2.00 in. dia., with hollow or solid ID. Capable of operating continuously at up to 500°F, close tolerance tubing profiles provide non-stick surface and resist most chemicals and solvents. TexFluor(TM) PTFE Shapes can be supplied spooled or cut to length, with services include forming, hole...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers