Ransburg Electrostatic Systems
Toledo, OH 43612
Share:
Electrostatic Spray Guns are designed for efficiency.
Vector Systems optimize atomization and transfer efficiency through Vector gun design that redistributes pressure in air cap and adjusts balance between atomization and fan air. While reduced-weight design lends to operator comfort and reduces fatigue, weight distribution optimizes balance and ergonomics. Guns incorporate minimal parts for reduced likelihood of failure and maintenance. Oversized,...
Read More »Ratio Control System enables precise metering and mixing.
Used in single- or multiple-component applications, RCS 2 is suited for precise electronically controlled gear-pump metering and mixing. It features magnetically coupled metering pumps that eliminate shaft seal leaks and provides absolute on-ratio gear-driven 1, 2, or 3 k mixing and metering control. In addition to solventborne or waterborne materials, system can also be used with rotary...
Read More »Electric Pump offers true positive displacement.
Sinks Smart Pump E2 provides users with positive displacement electric pump that addresses paint-specific needs of finishing industry. With motor frequency directly proportional to fluid output, product uses ac electric motor to maximize reliability while driving fluid section. It is suited for low-pressure circulating systems where paint specific needs for production, flow control, and long-term...
Read More »Robot Powder Applicator suits automotive applications.
Designed for automotive exterior and interior cut-in applications, RPA-1 powder gun provides bell-like performance features such as uniform film build and transfer efficiency. It atomizes with no moving parts and simplifies automation controls while minimizing number of robots and atomizers. Simplified design eliminates rotating parts and eliminates defects caused from impact fusion.
Read More »
Electric Reciprocator delivers smooth, precise control.
Suited for critical regulation in blended pattern applications, Electric TurboDisk Reciprocator features fail safe breaking and counter balanced drive tube for smooth operation and control over paint film deposit. There is no hydraulic tubing to run and install, and unit does not require oil fill/flush procedure. Configured to deliver stroke lengths from 5-32 ft in 1 ft increments, unit provides...
Read More »
Color Change System features insert-and-seal design.
Modular Color Change System, Model MCV2 is intended for use with all coatings, from waterborne high solids to catalyzed materials. Featuring corrosion-resistant, plastic design, system can be configured for up to 32 colors. Insert-and-seal design requires no additional fittings at connection point. Internally ported stack purge/bellwash module eliminates need for additional solvent/air...
Read More »
Electrostatic Finishing Outfit suits indoor/outdoor use.
With transfer efficiencies to 95%, Deuce(TM) provides on-site solution to refinishing metal office and shop furniture, fences, and other structures. It performs uniform finishing of tube, rod, wire, and screen goods from one side. Product comes with No. 2 process gun, bell, high-voltage cable, power supply, fluid hose, pressure pot, compressor, solvent safety can, and cart. Design minimizes...
Read More »
Process Control monitors air usage of atomizers.
Utilizing closed-loop module, AirTronic provides continuous, precise monitoring and control of air volume set points for rotary atomizers, air atomizers, and powder pumps. It accommodates independent and slave modes by incorporating 2 channels per module and 2 modes of operation. AirTronic provides production monitoring through standard lpm display units at module or remote location. It offers...
Read More »High Speed Applicator handles difficult coatings.
Made of stainless steel/TeflonÃ-®, TurboDisk2 Rotary Atomizer is virtually impenetrable to all fluids. It features serrated edge design and dual feed fluid system. High flow regulators and fluid valves allow for simultaneous paint push out while solvent washes feed tube and disk. Fluid section can be exchanged in minimal time due to quick disconnect features. TurboDisk2 is suited for wide...
Read More »
Electrostatic Spray Guns are designed for efficiency.
Vector Systems optimize atomization and transfer efficiency through Vector gun design that redistributes pressure in air cap and adjusts balance between atomization and fan air. While reduced-weight design lends to operator comfort and reduces fatigue, weight distribution optimizes balance and ergonomics. Guns incorporate minimal parts for reduced likelihood of failure and maintenance. Oversized,...
Read More »ITW 2006 Training Class Schedule
ITW Automotive Finishing & ITW Ransburg offer a full line of training classes designed for all types of paint and application personnel. Classes are open to suppliers, vendors, customers and end users and are taught by experienced, field-trained professionals who know electrostatics as well as related fields. All classes will discuss safety and grounding as applicable to the equipment being...
Read More »Ratio Control System enables precise metering and mixing.
Used in single- or multiple-component applications, RCS 2 is suited for precise electronically controlled gear-pump metering and mixing. It features magnetically coupled metering pumps that eliminate shaft seal leaks and provides absolute on-ratio gear-driven 1, 2, or 3 k mixing and metering control. In addition to solventborne or waterborne materials, system can also be used with rotary...
Read More »Electric Pump offers true positive displacement.
Sinks Smart Pump E2 provides users with positive displacement electric pump that addresses paint-specific needs of finishing industry. With motor frequency directly proportional to fluid output, product uses ac electric motor to maximize reliability while driving fluid section. It is suited for low-pressure circulating systems where paint specific needs for production, flow control, and long-term...
Read More »Robot Powder Applicator suits automotive applications.
Designed for automotive exterior and interior cut-in applications, RPA-1 powder gun provides bell-like performance features such as uniform film build and transfer efficiency. It atomizes with no moving parts and simplifies automation controls while minimizing number of robots and atomizers. Simplified design eliminates rotating parts and eliminates defects caused from impact fusion.
Read More »
Electric Reciprocator delivers smooth, precise control.
Suited for critical regulation in blended pattern applications, Electric TurboDisk Reciprocator features fail safe breaking and counter balanced drive tube for smooth operation and control over paint film deposit. There is no hydraulic tubing to run and install, and unit does not require oil fill/flush procedure. Configured to deliver stroke lengths from 5-32 ft in 1 ft increments, unit provides...
Read More »
Color Change System features insert-and-seal design.
Modular Color Change System, Model MCV2 is intended for use with all coatings, from waterborne high solids to catalyzed materials. Featuring corrosion-resistant, plastic design, system can be configured for up to 32 colors. Insert-and-seal design requires no additional fittings at connection point. Internally ported stack purge/bellwash module eliminates need for additional solvent/air...
Read More »
Electrostatic Finishing Outfit suits indoor/outdoor use.
With transfer efficiencies to 95%, Deuce(TM) provides on-site solution to refinishing metal office and shop furniture, fences, and other structures. It performs uniform finishing of tube, rod, wire, and screen goods from one side. Product comes with No. 2 process gun, bell, high-voltage cable, power supply, fluid hose, pressure pot, compressor, solvent safety can, and cart. Design minimizes...
Read More »
Process Control monitors air usage of atomizers.
Utilizing closed-loop module, AirTronic provides continuous, precise monitoring and control of air volume set points for rotary atomizers, air atomizers, and powder pumps. It accommodates independent and slave modes by incorporating 2 channels per module and 2 modes of operation. AirTronic provides production monitoring through standard lpm display units at module or remote location. It offers...
Read More »High Speed Applicator handles difficult coatings.
Made of stainless steel/TeflonÃ-®, TurboDisk2 Rotary Atomizer is virtually impenetrable to all fluids. It features serrated edge design and dual feed fluid system. High flow regulators and fluid valves allow for simultaneous paint push out while solvent washes feed tube and disk. Fluid section can be exchanged in minimal time due to quick disconnect features. TurboDisk2 is suited for wide...
Read More »