Makita USA, Inc.

Machinery & Machining Tools

Slide Compound Miter Saw features portable design.

Equipped with 8 Â-½ in. blade, Model LS0815F is powered by direct drive 10.5 A motor with soft start. Linear ball bearing system delivers smooth, dead-on accurate cuts. At 90°, saw has 12 in. crosscutting capacity, with 8 ½ in. capacity at 45° (miter). Model LS0815F miters 0–50° left and 0–60° right, with positive stops at 0, 15, 22.5, 31.6, 45,...

Read More »
Compound Miter Saw features 10 in. carbide-tipped blade.
Machinery & Machining Tools

Compound Miter Saw features 10 in. carbide-tipped blade.

Powered by direct drive 13 A motor with soft start and no load speed of 4,300 rpm, Model LS1018 is suited for applications ranging from fine woodworking and carpentry to general construction. Saw miters 0–47° left and 0–60° right, with positive stops at 0, 15, 22.5, 31.6, and 45° (left and right). At 90°, Model LS1018 has 12 in. crosscutting capacity, with 8Â-½...

Read More »
Construction Equipment and Supplies

Rotary Hammer delivers faster drilling with minimal vibration.

Featuring 1 9/16 in. capacity in concrete, 1,450–2,900 bpm AVT® HR4013C incorporates synchronized Anti-Vibration Technology (AVT) with 3 components — air-actuated counterbalance, vibration absorbing housing, and integrated damper spring at base of impact bolt — to reduce vibration to 5 m/secÂ-² for operational efficiency and comfort. Dual mode tool offers 24 bit angle settings...

Read More »
Corded, 1 in. Rotary Hammers are suited for overhead drilling.
Construction Equipment and Supplies

Corded, 1 in. Rotary Hammers are suited for overhead drilling.

To increase accuracy, model HR2611F, and model HR2621 feature Anti-Vibration Technology (AVT®) internal counterbalance system. Both models deliver 2.1 lb-ft impact energy and offer 3 selectable modes ofÂ- operation: rotation only, hammering with rotation, or chipping only. Other features include sequential impact timing, variable speed trigger, and 40 bit angle settings. While HR2621...

Read More »
Cordless 18 V Caulking Guns combine power and speed.
Explosives, Armaments, and Weaponry

Cordless 18 V Caulking Guns combine power and speed.

Weighing 5.1 lb with battery, 18 V LXT® 10 oz Caulk and Adhesive Gun (LXGC011) has compact, 15 7/8 in. design. Weighing 6.0 lb with battery, 18 V LXT® 20 oz. Barrel Style Caulk and Adhesive Gun (LXGC011B) has 21Â-¼ in. design and lets user dispense 20 oz cartridge, sausage packs, and bulk materials. Both guns are powered by 18 V Li-Ion battery that reaches full charge in 30 min....

Read More »
Machinery & Machining Tools

Circular Saw Blade features FMF Mexican Soccer logo.

Intended for Hispanic contractors that follow FMF soccer, 7 Â-¼ in. 24T FMF Framing Blade is engineered with 24 teeth, each of which has M shape with 2 cutting points for quick cuts with smooth finish. Blade is ultra-coated to minimize pitch built-up, and has high-grade C-3 fine-grain tungsten carbide tips for durability. Blade is suitable for cutting rough framing lumber, pressure treated...

Read More »
Machinery & Machining Tools

Cordless Chain Saw produces low noise and no emissions.

Powered by two 18 V LXT® Li-Ion batteries for 36 V power and run time, HCU02ZX2 cordless chain saw features 12 in.Â- guide bar and chain speed of 1,650 fpm. Tool operates at 89 dB(A) under no-load conditions and 90 dB(A) under load and features zero emissions. Unit also offers tool-less chain adjustments and front hand guard. Also available, 36V LXT® Lithium-Ion 12...

Read More »
Electrical Equipment & Systems

Li-Ion Charger charges two 18 V batteries in 60 minutes.

Suitable for jobsites running multiple Makita 18 V batteries, Rapid Optimum 4-Port Charger, Model DC18SF, is engineered with 2 controllers for faster charging than models with single controller. During charging process, charger communicates with computer chip inside each battery to monitor current, voltage, and temperature. ENERGY STAR® qualified unit, measuring just 17.3 in. long, fits in...

Read More »
Machinery & Machining Tools

Cordless Jigsaw is powered by 12 V max Lithium-Ion battery.

Model VJ01W is drivenÂ- by motor that delivers 0–2,400 strokes/min, and variable-speed control dial lets user match speed to application. With 3 orbital settings plus straight cutting, tool is suited for cutting range of materials. Through-the-body dust port is provided for use with vacuum, while built-in dust blower clears line-of-cut for improved...

Read More »
Hammer Driver-Drill combines speed, torque, and durability.
Agricultural & Farming Products

Hammer Driver-Drill combines speed, torque, and durability.

Delivering max torque of 750 lb-in. and speeds to 30,000 bpm and 2,000 rpm, 18 V LXT® Li-Ion Cordless Â-½ in. Hammer Driver-Drill model LXPH03 features all-metal planetary gear system, 21 clutch settings, and all-metal ½ in. ratcheting chuck. This 8 7/8 in. long tool, which weighs 5.1 lb with battery, offers respective steel, wood, and masonry capacities of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers