Metcam, Inc.
Alpharetta, GA 30004
Revolutionary Commercial Truck Bed Extension, TramBed 2.0, to Be Demonstrated at the Work Truck Show
March 14, 2017 (Alpharetta, GA)–Metcam, a fabricator of sheet metal components and assemblies for OEMs, will be displaying its innovative truck bed extension, TramBed 2.0, at The Work Truck Show Ride-and-Drive, March 15 and 16, 2017. Held in conjunction with The Work Truck Show at the Indiana Convention Center in Indianapolis, The Ride-and-Drive will be held at the Convention Center Exhibit...
Read More »
Metcam Formally Announces Business Solutions Division to Help Inventors Launch Ingenious Products
December 2, 2016 (Alpharetta, GA) - Metcam, an Alpharetta-based fabricator of sheet metal components and assemblies for OEMs, today announced the official debut of its Business Solutions Division (BSD). The BSD allows inventors of sheet metal intensive products to leverage the award winning quality, manufacturing, financial, and environmental systems and resources of Metcam to bring their...
Read More »TramBed 2.0 Truck Bed Extension includes Stainless Steel Deck.
With welded, adjustable, power-coated legs, TramBed 2.0 commercial truck bed extension is optimal to use with forklift. Including powder-painted extension rails and legs, units are completely pre-assembled and ready for rapid installation. When installed in factory truck bed, unit offers quick access with complete stability and support. Providing easy-slide extensions, device reduces potential...
Read More »
Commercial Truck Bed Extender features adjustable legs.
TramBed 2.0 can be slid out by truck owners and braced via its adjustable legs. Supporting loads up to 2,000 lb (8 ft truck bed) with legs extended, legs keep extension stable and permit- product to be used as in-field work surface while adding minimal to no stress on truck suspension. Heavy-duty construction features all-stainless steel deck and factory-welded, powder-painted extension rails...
Read More »Metcam Enters Commercial Truck Accessory Market with Launch of New TramBed Division to Manufacture and Market Truck Bed Extensions
Alpharetta, GA – Metcam, a fabricator of sheet metal components and assemblies for OEMs, announces the launch of a new division to manufacture and market TramBed™, a commercial-grade truck bed extension. Metcam has acquired full rights to the technology, and its new division will be operating the entire supply chain for this unique product, from engineering to manufacturing, assembly and...
Read More »Metcam Extends Its Services to Prototype Fabrication for R&D; Helps U.S. Manufacturer Develop an Alternative Energy Product
Alpharetta, GA – Metcam, a fabricator of sheet metal components and assemblies for OEMs, today announced it is now offering research and development (RD) services, including test unit (prototype) fabrication, for major manufacturers. Metcam is currently working with a U.S. based, multinational conglomerate to produce prototype fuel cells, one of the most exciting alternative energy developments...
Read More »Metcam Completes and Implements Nine Kaizen Projects; Reaps Substantial ROI and Process Quality Improvements
Alpharetta, GA – Metcam, a fabricator of sheet metal components and assemblies for OEMs, today announced it has successfully implemented nine process improvements since it began its Kaizen initiative in early 2014. Kaizen, which is Japanese for good change, is a business philosophy of continuous improvement through small, targeted initiatives. Thus far, the projects have netted the company...
Read More »Metcam Shines Spotlight on Diversity; Commitment to Quality and Sustainability with New REFUsol Fabrication Contract
Alpharetta, GA - Metcam, a fabricator of sheet metal components and assemblies for OEMs, announced today that it has signed a letter of intent with German firm REFUsol GmbH to fabricate aluminum enclosures and other parts for photovoltaic inverters used in solar panel arrays. With a peak efficiency of over 98%, REFUsol inverters are among the most efficient devices on the market, and the company...
Read More »Metcam Wins Small Manufacturer of the Year Award
Alpharetta, GA - November 16, 2017–Metcam, an Alpharetta-based fabricator of sheet metal components and assemblies for OEMs, was awarded Small Manufacturer of The Year for Forsyth County's 2017 Manufacturers of Distinction & Leadership (MODL) Awards. This year serves as the Cumming-Forsyth Chamber and the South Forsyth Rotary Club's inaugural MODL Awards. The series of awards were created to...
Read More »
Revolutionary Commercial Truck Bed Extension, TramBed 2.0, to Be Demonstrated at the Work Truck Show
March 14, 2017 (Alpharetta, GA)–Metcam, a fabricator of sheet metal components and assemblies for OEMs, will be displaying its innovative truck bed extension, TramBed 2.0, at The Work Truck Show Ride-and-Drive, March 15 and 16, 2017. Held in conjunction with The Work Truck Show at the Indiana Convention Center in Indianapolis, The Ride-and-Drive will be held at the Convention Center Exhibit...
Read More »
Metcam Formally Announces Business Solutions Division to Help Inventors Launch Ingenious Products
December 2, 2016 (Alpharetta, GA) - Metcam, an Alpharetta-based fabricator of sheet metal components and assemblies for OEMs, today announced the official debut of its Business Solutions Division (BSD). The BSD allows inventors of sheet metal intensive products to leverage the award winning quality, manufacturing, financial, and environmental systems and resources of Metcam to bring their...
Read More »TramBed 2.0 Truck Bed Extension includes Stainless Steel Deck.
With welded, adjustable, power-coated legs, TramBed 2.0 commercial truck bed extension is optimal to use with forklift. Including powder-painted extension rails and legs, units are completely pre-assembled and ready for rapid installation. When installed in factory truck bed, unit offers quick access with complete stability and support. Providing easy-slide extensions, device reduces potential...
Read More »
Commercial Truck Bed Extender features adjustable legs.
TramBed 2.0 can be slid out by truck owners and braced via its adjustable legs. Supporting loads up to 2,000 lb (8 ft truck bed) with legs extended, legs keep extension stable and permit- product to be used as in-field work surface while adding minimal to no stress on truck suspension. Heavy-duty construction features all-stainless steel deck and factory-welded, powder-painted extension rails...
Read More »Metcam to Host Facility Tours to Commemorate 6th Annual Manufacturing Day
Tours of Alpharetta Facility to Focus on Advancements and Careers in Manufacturing September 2, 2016 (Alpharetta, GA)- - Metcam, Alpharetta-based fabricator of sheet metal components and assemblies for OEMs, will commemorate National Manufacturing Day by hosting tours for schools, businesses and members of the community, October 7, 2016, at its manufacturing facility located at 305 Tidwell...
Read More »Manufacturing Society Vision Breakfast Featured Programs and Students From Forsyth Central High School
(Alpharetta, GA) – Metcam, a fabricator of sheet metal components and assemblies for OEMs, today announced that the Manufacturers' Society of Forsyth County held its annual Vision Breakfast on March 1, 2016, at Forsyth Central High School. Metcam helped found the association in 2013 and continues its support through co-sponsorship of events. Forsyth Central Engineering Team and Robotics Club...
Read More »Metcam Celebrates Fifth Annual Manufacturing Day with Open House and Tours of Its Alpharetta Facility
Businesses, Schools, Members of the Community Invited to October 2 Event to See Lean Manufacturing Principles in Action and Learn about Careers in Manufacturing (Alpharetta, GA) – Metcam, an Alpharetta-based fabricator of sheet metal components and assemblies for OEMs, will celebrate National Manufacturing Day by welcoming businesses, students and members of the community for a tour of its...
Read More »Metcam Enters Commercial Truck Accessory Market with Launch of New TramBed Division to Manufacture and Market Truck Bed Extensions
Alpharetta, GA – Metcam, a fabricator of sheet metal components and assemblies for OEMs, announces the launch of a new division to manufacture and market TramBed™, a commercial-grade truck bed extension. Metcam has acquired full rights to the technology, and its new division will be operating the entire supply chain for this unique product, from engineering to manufacturing, assembly and...
Read More »Metcam Extends Its Services to Prototype Fabrication for R&D; Helps U.S. Manufacturer Develop an Alternative Energy Product
Alpharetta, GA – Metcam, a fabricator of sheet metal components and assemblies for OEMs, today announced it is now offering research and development (RD) services, including test unit (prototype) fabrication, for major manufacturers. Metcam is currently working with a U.S. based, multinational conglomerate to produce prototype fuel cells, one of the most exciting alternative energy developments...
Read More »