Oseco Elfab
Broken Arrow, OK 74012
Oseco to Feature PROLP Disk at ISA Expo
Broken Arrow, Oklahoma (September 29, 2006)-The high quality, ultra-low pressure PROLP rupture disk will be Oklahoma Safety Equipment Co., Inc.'s (Oseco) featured product at the Instrumentation, Systems and Automation Society (ISA) Expo October 17-19 in Houston. The PROLP rupture disk operates in very low pressure vessels, where equipment operating costs are key considerations. It has a fully...
Read More »Rupture Disk/Sensor provides sanitary pressure relief.
Offered in sizes from 1-4 in., Model S-PRO-S combines bursting disk and sensor into single assembly with range of burst pressures from 16-150 psig. When disk bursts, sensor's circuit is broken, triggering activation of alarm. Placement of sensor and disk scoring on vent side present smooth surface to process, minimizing product build up. Non-fragmenting design prevents contamination from rupture...
Read More »
Rupture Disk Holder withstands corrosive conditions.
Fluoropolymer-booted insert holder is constructed with solid PTFE resin insert pressed into inner diameter of stainless steel holder. When used with fluoropolymer lined rupture disk, only fluoropolymer is in contact with corrosive media. Available in sizes from 1-8 in., non-torque-sensitive, flat-seated holder bolts between standard ANSI pipe flanges. It is compatible with forward acting and...
Read More »
Rupture Disks feature vacuum support design.
For processes that operate under vacuum conditions, rupture disks with vacuum support ensure that disk does not collapse under differential back-pressure and operates correctly. One-piece vacuum support eliminates potential failure sites and has smooth design that reduces accumulation. Rupture disks are suited for agricultural/bulk powder, aerospace, chemical, gas, petroleum, pharmaceutical, and...
Read More »Rupture Disk suits demanding pressure applications.
PRO+ Rupture Disk features 95% operating ratio to guard against fatigue and premature disk rupture for both gas and liquid services. It operates without using cutting teeth. One-piece design and smooth surface prevent product buildup. With burst pressures from 8-750 psig, disk is compatible with wide range of applications and performs consistently in high- and low-pressure environments.
Read More »
Rupture Panels handle extreme pressures.
Series MVRB Metal Vent Reverse Buckling rupture panels can avert catastrophic explosions caused by overpressures in dust collectors, conveyor systems, and dryers. Smooth surface prevents product buildup and contamination, while non-fragmenting design increases process safety in event of panel rupture. Round panels range from 12-36 in. dia and come in SS, nickel, inconel, or monel. They feature...
Read More »
Pressure-Relief Assembly provides compressed-gas safety.
One Time Crimped (OTC) pressure relief device is a one-piece sealed assembly, which is replaced in its entirety in event of overpressure. Brass body is used with PRO Series rupture disks, which are offered in nickel and 316 stainless steel. Each unit is custom manufactured according to disk material, burst pressure, and temperature requirements specified by customer.
Read More »
Sanitary Rupture Panel is crevice-free.
Suited for food, pharmaceutical, and biotech applications, GLPS panel has surface with no crevices, slits, or sharp corners where product can accumulate. Installed without addition of separate gasket, panel is manufactured of stainless steel and food grade silicone. Product performs consistently in environments with temperatures up to 400Ã-
Read More »Oseco's Boh Now Based in Singapore
Boh to expand direct support in the Asia Pacific area Broken Arrow, Oklahoma (January 23, 2007)-Oklahoma Safety Equipment Co., Inc. (Oseco), a leading manufacturer of pressure relief devices, plans to further develop its growing customer base with the appointment of Ben Boh as Regional Manager for Asia. Boh is responsible for providing local technical sales support to customers in the Asia...
Read More »
Oseco to Feature PROLP Disk at ISA Expo
Broken Arrow, Oklahoma (September 29, 2006)-The high quality, ultra-low pressure PROLP rupture disk will be Oklahoma Safety Equipment Co., Inc.'s (Oseco) featured product at the Instrumentation, Systems and Automation Society (ISA) Expo October 17-19 in Houston. The PROLP rupture disk operates in very low pressure vessels, where equipment operating costs are key considerations. It has a fully...
Read More »Oseco to Feature High Performance Pro+ Disk at ISA Expo
Please note: Link to full resolution photo and Word file has changed for the release below; the correct link is as follows: http://www.halmapix.com/displaypr.php?RefNo=OS06-05 You have already received an e-mail containing this release; the link is incorrect in that version. The new link appears in the release below. Please disregard the old link. I apologize for any inconvenience this may have...
Read More »Rupture Disk/Sensor provides sanitary pressure relief.
Offered in sizes from 1-4 in., Model S-PRO-S combines bursting disk and sensor into single assembly with range of burst pressures from 16-150 psig. When disk bursts, sensor's circuit is broken, triggering activation of alarm. Placement of sensor and disk scoring on vent side present smooth surface to process, minimizing product build up. Non-fragmenting design prevents contamination from rupture...
Read More »
Rupture Disk Holder withstands corrosive conditions.
Fluoropolymer-booted insert holder is constructed with solid PTFE resin insert pressed into inner diameter of stainless steel holder. When used with fluoropolymer lined rupture disk, only fluoropolymer is in contact with corrosive media. Available in sizes from 1-8 in., non-torque-sensitive, flat-seated holder bolts between standard ANSI pipe flanges. It is compatible with forward acting and...
Read More »
Rupture Disks feature vacuum support design.
For processes that operate under vacuum conditions, rupture disks with vacuum support ensure that disk does not collapse under differential back-pressure and operates correctly. One-piece vacuum support eliminates potential failure sites and has smooth design that reduces accumulation. Rupture disks are suited for agricultural/bulk powder, aerospace, chemical, gas, petroleum, pharmaceutical, and...
Read More »Rupture Disk suits demanding pressure applications.
PRO+ Rupture Disk features 95% operating ratio to guard against fatigue and premature disk rupture for both gas and liquid services. It operates without using cutting teeth. One-piece design and smooth surface prevent product buildup. With burst pressures from 8-750 psig, disk is compatible with wide range of applications and performs consistently in high- and low-pressure environments.
Read More »
Rupture Panels handle extreme pressures.
Series MVRB Metal Vent Reverse Buckling rupture panels can avert catastrophic explosions caused by overpressures in dust collectors, conveyor systems, and dryers. Smooth surface prevents product buildup and contamination, while non-fragmenting design increases process safety in event of panel rupture. Round panels range from 12-36 in. dia and come in SS, nickel, inconel, or monel. They feature...
Read More »
Pressure-Relief Assembly provides compressed-gas safety.
One Time Crimped (OTC) pressure relief device is a one-piece sealed assembly, which is replaced in its entirety in event of overpressure. Brass body is used with PRO Series rupture disks, which are offered in nickel and 316 stainless steel. Each unit is custom manufactured according to disk material, burst pressure, and temperature requirements specified by customer.
Read More »
Sanitary Rupture Panel is crevice-free.
Suited for food, pharmaceutical, and biotech applications, GLPS panel has surface with no crevices, slits, or sharp corners where product can accumulate. Installed without addition of separate gasket, panel is manufactured of stainless steel and food grade silicone. Product performs consistently in environments with temperatures up to 400Ã-
Read More »