Faulhaber MicroMo, LLC.

Electrical Equipment & Systems

Brushless Flat DC Micromotors deliver smooth operation.

Available 15 and 26 mm dia, FAULHABER flat DC micromotors provide electronic commutation based on 3 digital hall sensors with nominal voltages of 6 or 12 V. Respective output torque ratings for 15 and 26 mm dia motors are 0.6 and 3.8 mNm, and output torque can be increased up to 30 or 100 mNm depending on gearmotor versions. Free of cogging, motors are characterized by smooth operation, and 26 mm...

Read More »
Brushless DC Servomotors are available in twelve 32 mm types.
Electrical Equipment & Systems

Brushless DC Servomotors are available in twelve 32 mm types.

Operating at speeds from 5,500-7,100 rpm, BX4 Series electronic commutated 4-pole motors provide continuous cogging-free output torque of 56 or 97 mNm. Reversible motors operate in temperatures from -40 to +100°C and have peak and continuous current limiting capabilities for motor protection. Integrated encoder is available in 4 factory programmable resolutions from 32, 64, 128, to 256...

Read More »
Starter Kit aids rapid prototyping of brushless DC motors.
Architectural & Civil Engineering Products

Starter Kit aids rapid prototyping of brushless DC motors.

Designed to facilitate work with MicroMo miniature synchronous motor, Microsystems Starter Kit contains drive electronics, adaptor board, and motor. Adapter board has integrated oscillator for speed control, PWM frequency of 500 kHz, and direction of motor rotation is reversible. Kit accommodates DC Brushless motors series 0206...B, 0308...B, and 1202...BS/BH, which offer respective continuous...

Read More »
Brushless DC Motor provides cog-free motion.
Electrical Equipment & Systems

Brushless DC Motor provides cog-free motion.

With 3 mm external motor diameter and 8 mm length, Smoovy Series 0308...B combines skewed winding with jewel bearings and rotor made of Neodymium rare-earth magnets. Motor can achieve continuous output torque up to 0.014 mNm at speeds to 15,000 rpm. Due to electronic commutation, service life of motor is only limited by bearings. Series 0308...B can be combined with gearbox and linear actuator...

Read More »
Electrical Equipment & Systems

12mm Miniature Stepper Motor

Clearwater, Florida (December 19, 2006) - MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220 has a holding torque without current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. The ADM1220...

Read More »
Controls & Controllers

8mm Precision Zero-Backlash Spur Gearhead

Clearwater, Florida (February 1, 2007) - MicroMo Electronics, Inc. announces the addition of a metal spur zero backlash gearhead with the release of the Series 08/3. The zero backlash spur gearhead is ideal for applications requiring precision positioning with high resolution and low torque requirements. The gearhead weighs a mere 4.5 to 5.7 grams while providing a maximum continuous torque of 15...

Read More »
Compact Motion Controller for DC Micromotors 4 Quadrant PWM with RS232 and CAN Interface
Controls & Controllers

Compact Motion Controller for DC Micromotors 4 Quadrant PWM with RS232 and CAN Interface

4 Quadrant PWM with RS232 and CAN Interface Clearwater, Florida (November 9, 2006) - MicroMo Electronics, Inc. announces the release of the series MCBL/MCDC 3006 C/S compact motion controller. The MCDC 3006 is for use with DC micromotors. The MCBL 3006 is for use with brushless DC motors. A printed circuit board version of the controller is available for superordinate systems for OEM...

Read More »
Electrical Equipment & Systems

Stepper Motor comes in miniature package.

With 12 mm external diameter and 17.2 mm long design, Series ADM1220 offers holding torque without current of 2.4 mNm and can achieve boost torque of 4.1 mNm. Motor offers 20 full steps per revolution in full step mode and is capable of microstep operation at speeds from 10-6,000 rpm. Able to be combined with gearhead and/or lead screw, series has 1.5 mm diameter output shaft and no axial...

Read More »
6mm DC Motor with Planetary Gearhead
Electrical Equipment & Systems

6mm DC Motor with Planetary Gearhead

The Faulhaber 0615 motor is presently the only production 6mm diameter coreless DC motor available with a matching diameter planetary gearhead. Designed with a high energy rare earth magnet and the patented Faulhaber skew-winding, it is available in 1.5, 3, and 4 Volt versions. The motor has a no-load speed of 19000 rpm and is capable of .11 mNm continuous and peak torque at stall of .24 mNm. The...

Read More »
Powerful But Small 10mm DC Micromotor
Electrical Equipment & Systems

Powerful But Small 10mm DC Micromotor

Clearwater, Florida - MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1024...S. With an external motor-diameter of only 10 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the System FAULHABER" ironless rotor and Neodymium rare earth magnets to achieve a stall...

Read More »

All Topics