Faulhaber Micromo, LLC
Clearwater, FL 33762
Starter Kit aids rapid prototyping of brushless DC motors.
Designed to facilitate work with MicroMo miniature synchronous motor, Microsystems Starter Kit contains drive electronics, adaptor board, and motor. Adapter board has integrated oscillator for speed control, PWM frequency of 500 kHz, and direction of motor rotation is reversible. Kit accommodates DC Brushless motors series 0206...B, 0308...B, and 1202...BS/BH, which offer respective continuous...
Read More »
Brushless DC Motor provides cog-free motion.
With 3 mm external motor diameter and 8 mm length, Smoovy Series 0308...B combines skewed winding with jewel bearings and rotor made of Neodymium rare-earth magnets. Motor can achieve continuous output torque up to 0.014 mNm at speeds to 15,000 rpm. Due to electronic commutation, service life of motor is only limited by bearings. Series 0308...B can be combined with gearbox and linear actuator...
Read More »12mm Miniature Stepper Motor
Clearwater, Florida (December 19, 2006) - MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220 has a holding torque without current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. The ADM1220...
Read More »8mm Precision Zero-Backlash Spur Gearhead
Clearwater, Florida (February 1, 2007) - MicroMo Electronics, Inc. announces the addition of a metal spur zero backlash gearhead with the release of the Series 08/3. The zero backlash spur gearhead is ideal for applications requiring precision positioning with high resolution and low torque requirements. The gearhead weighs a mere 4.5 to 5.7 grams while providing a maximum continuous torque of 15...
Read More »
Powerful But Small 10mm DC Micromotor
Clearwater, Florida - MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1024...S. With an external motor-diameter of only 10 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the System FAULHABER ironless rotor and Neodymium rare earth magnets to achieve a stall...
Read More »Stepper Motor features 22 mm diameter.
Measuring 22 x 25.9 mm, 2-phase Model AM 2224 achieves output of 2.5 W and peak holding torque of 45 mNm. Versions are available in 3, 6, 12, and 24 V, as well as 0.25 and 0.50 A. Motor processes transmitted control signals with accuracy, allowing angular step of 18-
Read More »
Transceiver shields against EMI/RFI.
FAULHABER LT-1 transceiver converts unipolar square-wave signals to or from differential signals. When it is set to transmitter, it prevents square-signal degradation over distances up to 4,000 ft between motor, encoder, and control electronics. Measuring 2 in. long and 0.75 in. high, LT-1 offers 2 DB-9 connectors at each end and configuration switches to set it up as transmitter or receiver.
Read More »FAULHABER Webinars - Driven by Knowledge
Learn new things, deepen existing knowledge, talk to experts – that’s possible from anywhere, even when working from home. FAULHABER is therefore starting a new series of webinars on exciting topics, such as the development of noise in drive systems, in-depth application know-how and even on helpful tools such as the FAULHABER Motion Manager. Participation is free of charge. Only registration...
Read More »Award: FAULHABER is First Preferred Technology Partner of Heidelberger Druckmaschinen AG
Heidelberger Druckmaschinen AG has been a reliable partner with great innovative strength for the global printing industry. The company's mission is to shape the digital future of the sector. For the extraordinary technological achievements and innovative support on the way to achieving this goal, Heidelberger has now designated FAULHABER as “Preferred Technology Partner.” FAULHABER is...
Read More »New Catalogue 2020/2021
A FAULHABER Drive System is more than just the sum of its components. When application engineers combine FAULHABER products with one another, the overall performance of the system increases. This is the FAULHABER principle of perfectly optimised parameters and interfaces for compact, integrated and high-performance drive solutions. On more than 650 pages, FAULHABER presents the most comprehensive...
Read More »MICROMO is Now FAULHABER MICROMO LLC
The FAULHABER GROUP is reorganizing its North American Operations Center to accelerate future growth. As of July 2019, MicroMo Electronics Inc. (MICROMO) has been officially reorganized as FAULHABER MICROMO LLC and now becomes a fully integrated part of the FAULHABER Drive Systems division of the FAULHABER GROUP. The restructuring represents the realization of the long-term vision of the late...
Read More »
Starter Kit aids rapid prototyping of brushless DC motors.
Designed to facilitate work with MicroMo miniature synchronous motor, Microsystems Starter Kit contains drive electronics, adaptor board, and motor. Adapter board has integrated oscillator for speed control, PWM frequency of 500 kHz, and direction of motor rotation is reversible. Kit accommodates DC Brushless motors series 0206...B, 0308...B, and 1202...BS/BH, which offer respective continuous...
Read More »
Brushless DC Motor provides cog-free motion.
With 3 mm external motor diameter and 8 mm length, Smoovy Series 0308...B combines skewed winding with jewel bearings and rotor made of Neodymium rare-earth magnets. Motor can achieve continuous output torque up to 0.014 mNm at speeds to 15,000 rpm. Due to electronic commutation, service life of motor is only limited by bearings. Series 0308...B can be combined with gearbox and linear actuator...
Read More »12mm Miniature Stepper Motor
Clearwater, Florida (December 19, 2006) - MicroMo Electronics, Inc. announces the expansion of its miniature stepper motor product line with the addition of its Series ADM1220. The miniature stepper motor has an external motor-diameter of only 12 mm and a length of 17.2 mm. The ADM1220 has a holding torque without current of 2.4 mNm and can achieve a high boost torque of 4.1 mNm. The ADM1220...
Read More »8mm Precision Zero-Backlash Spur Gearhead
Clearwater, Florida (February 1, 2007) - MicroMo Electronics, Inc. announces the addition of a metal spur zero backlash gearhead with the release of the Series 08/3. The zero backlash spur gearhead is ideal for applications requiring precision positioning with high resolution and low torque requirements. The gearhead weighs a mere 4.5 to 5.7 grams while providing a maximum continuous torque of 15...
Read More »
Powerful But Small 10mm DC Micromotor
Clearwater, Florida - MicroMo Electronics, Inc. announces the expansion of its DC Micromotor product line with the addition of its Series 1024...S. With an external motor-diameter of only 10 mm and a length of 24 mm, the power to volume ratio is truly impressive. This is achieved through a combination of the System FAULHABER ironless rotor and Neodymium rare earth magnets to achieve a stall...
Read More »Stepper Motor features 22 mm diameter.
Measuring 22 x 25.9 mm, 2-phase Model AM 2224 achieves output of 2.5 W and peak holding torque of 45 mNm. Versions are available in 3, 6, 12, and 24 V, as well as 0.25 and 0.50 A. Motor processes transmitted control signals with accuracy, allowing angular step of 18-
Read More »